Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Soil reinforcement remains a vital task of a geotechnical engineer. There are a few support strategies for counting sands considered in this field that are strengthened by combined hydraulic binder (such as cement) and/or fibres. The behaviour of such mixtures (sand–cement and sand–cement–fibre mixtures) in terms of direct shear response has been subject to a lot of controversy in the literature. The base material used in the framework of this study is Chlef sand (taken from Chlef Valley, Algeria), mixed with cement and reinforced with synthetic fibres and considering the use of a direct shear device. , mixed with cement and reinforced with synthetic fibres. The types of fibres in terms of the materials used in the manufacture as well as their length and physical characteristics can improve the stress/strain response of sands. Laboratory results show that the shear strength response of sand–cement mixture increases the shear strength of this last and that it was observed with the addition of cement to the sand. The tests done on the mixtures of sand and cement and on fibre-reinforced mixtures showed better strength compared with just sand or cemented sand alone. Adding fibre to the mixture improved the soil’s ability to withstand shear forces. As the threshold value, the fibre content should be at least 0.15% in order to make a noticeable improvement in the mechanical properties. This increase in shear strength is noticed accompanied by a limitation in the samples’ contractiveness.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
48--64
Opis fizyczny
Bibliogr. 42 poz., rys.
Twórcy
autor
- Laboratory of Materials Sciences and Environment, University Hassiba Benbouali University of Chlef 02000 Chlef, Algeria
autor
- Laboratory of Materials Sciences and Environment, University Hassiba Benbouali University of Chlef 02000 Chlef, Algeria
autor
- Laboratory of Materials Sciences and Environment, University Hassiba Benbouali University of Chlef 02000 Chlef, Algeria
autor
- LSGR Laboratory, University Hassiba Benbouali of Chlef 02000 Chlef, Algeria
Bibliografia
- [1] Lu, L., Liu, C., Qu, S., & Zhang, M. (2022). Experimental study on the mechanical and hydraulic behaviour of Fibre-Reinforced cemented soil with fly ash. Construction and Building Materials, 321, 126374.
- [2] Porbaha, A., Shibuya, S., &Kishida, T. (2000). State of the art in deep mixing technology. Part III: geomaterial characterization. Proceedings of the Institution of Civil Engineers-Ground Improvement, 4(3), 91-110.
- [3] Gregory, G. H., & Chill, D. S. (1998). Stabilization of earth slopes with fiber reinforcement. In Proc., 6th Int. Conf. on Geosynthetics (pp. 1073-1078). International Geosynthetics Society.
- [4] Ziegler, S., Leshchinsky, D., Ling, H. I., & Perry, E. B. (1998). Effect of short polymeric fibers on crack development in clays. Soils and Foundations, 38(1), 247-253.
- [5] Choubane, B., Robert, K., &Armaghani, J. (2001). Full-scale laboratory evaluation of polypropylene fiber reinforcement of subgrade soils. Transportation Research Record (TRB), 01-2157.
- [6] Webster, S. L., &Santoni, R. L. (1997). Contingency airfield and road construction using geosynthetic fiber stabilization of sands (Vol. 97, No. 4). US Army Engineer Waterways Experiment Station.
- [7] Tingle, J.S., Webster, S.L., & Santoni, R.L. (1999). Discrete Fiber Reinforcement of Sands for Expedient Road Construction. (1999). Discrete fiber reinforcement of sands for expedient road construction. Published 1 March 1999. Engineering, Environmental Science. DOI:10.21236/ADA362057
- [8] Tang, C., Shi, B., Gao, W., Chen, F., &Cai, Y. (2007). Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized clayey soil. Geotextiles and Geomembranes, 25(3), 194-202.
- [9] Ahmad, F., Bateni, F., &Azmi, M. (2010). Performance evaluation of silty sand reinforced with fibres. Geotextiles and geomembranes, 28(1), 93-99.
- [10] Zaimoglu, A.S., Yetimoglu, T. (2012). Strength Behavior of Fine Grained Soil Reinforced with Randomly Distributed Polypropylene Fibers. Geotech Geol Eng 30, 197–203 (2012). https://doi.org/10.1007/s10706-011-9462-5
- [11] Gray, D. H., &Ohashi, H. (1983). Mechanics of fiber reinforcement in sand.Journal of geotechnical engineering, 109(3), 335-353.
- [12] Murray, J. J., Frost, J. D., & Wang, Y. (2000). Behavior of a sandy silt reinforced with discontinuous recycled fiber inclusions. Transportation research record, 1714(1), 9-17.
- [13] Consoli, N. C., Rotta G. V., and Prietto. P. D. M. (2002). Influence Of Curing Under Stress On The Triaxial Response of Cemented Soils. Geotechnique 52(5): 382–384.
- [14] Zornberg, J. G. (2002). Discrete framework for limit equilibrium analysis of fibre-reinforced soil. Géotechnique, 52(8), 593-604.
- [15] Michalowski, R. L., &Čermák, J. (2003). Triaxial compression of sand reinforced with fibers. Journal of geotechnical and geoenvironmental engineering, 129(2), 125-136.
- [16] Sun, Q., Zhang, J. & Zhou, N. (2018). Early-Age Strength of Aeolian Sand-Based Cemented Backfilling Materials: Experimental Results. Arabian Journal for Sciences Engineering 43, 1697–1708 (2018). https://doi.org/10.1007/s13369-017-2654-4
- [17] Gul, N., & Mir, B. A. (2023). Performance evaluation of silty soil reinforced with glass fiber and cement kiln dust for subgrade applications. Construction and Building Materials, 392, 131943.
- [18] Shen, Y. S., Tang, Y., Yin, J., Li, M. P., & Wen, T. (2021). An experimental investigation on strength characteristics of fiber-reinforced clayey soil treated with lime or cement. Construction and Building Materials, 294, 123537.
- [19] Arab A. (2009) Monotonic and cyclic behaviour of silty sand, C. R. Mecanique 337 (2009) 621–631
- [20] Arab A., Sadek M., Belkhatir M., Shahrour I. (2014). “Monotonic preloading Effect on the Liquefaction Resistance of Silty Sand: a Laboratory Study”. Arabian Journal for Sciences Engineering. 2014. 39:685–694. DOI 10.1007/s13369-013-0700-4
- [21] DjaferHenni A, Arab A, Belkhatir M, Hamoudi SA, Khelafi H (2013) Undrainedbehavior of silty sand: effect of the overconsolidation ratio. Arab J Geosci. doi:10.1007/s12517-011- 0365-9
- [22] Benessalah, I., Sadek, M., Villard, P., and Arab, A. (2022). Undrained triaxial compression tests on three-dimensional reinforced sand: effect of the geocell height. European Journal of Environmental and Civil Engineering, 26(5), 1694-1705.
- [23] Benessalah, I., Arab, A., &Meziane, E. H. (2021). Intergranular void ratio and undrained monotonic behavior of Chlef sand containing low plastic fines. Acta Mechanica, 232(4), 1621- 1640.
- [24] Meziane, E. H., Benessalah, I. & Arab A. (2022). An insight into the liquefaction resistance of sand using cyclic undrained triaxial tests: Effect of the relative density and the loading amplitude. Acta Geotechnica Slovenica 18(2). 44-55. https://doi.org/10.18690/actageotechslov.18.2.44-55.2022
- [25] Boutouba, K., Benessalah, I., Arab, A., &Henni, A. D. (2019). Shear strength enhancement of cemented reinforced sand: role of cement content on the macro-mechanical behavior. Studia Geotechnica et Mechanica, 41(4), 200-211.
- [26] Merabet, K., Benessalah, I., Chemmam, M., & Arab, A. (2020). Laboratory study of shear strength response of Chlef natural sand: Effect of saturation. Marine Georesources & Geotechnology, 38(4), 461-467.
- [27] Della, N., Belkhatir, M., Arab, A., Canou, J., &Dupla, J. C. (2015). Undrained monotonic response and instability of medium-dense sandy soil. Marine Georesources & Geotechnology, 33(6), 487-495.
- [28] Aouali, N., Benessalah, I., Arab, A., Ali, B., & Abed, M. (2019). Shear strength response of fibre reinforced Chlef (Algeria) silty sand: laboratory study. Geotechnical and Geological Engineering, 37(2), 1047-1057.
- [29] Bouaricha, L., Henni, A. D., & Lancelot, L. (2017). A laboratory investigation on shear strength behavior of sandy soil: effect of glass fiber and clinker residue content. Studia Geotechnica et Mechanica, 39(4), 3-15.
- [30] ASTM D3080. : Standard test method for direct shear test of soils under consolidated drained conditions, American Society for Testing and Materials, West Conshohocken, (2005).
- [31] Nougar, B., Brahimi, A., Bouri, D. E., Arab, A., Benessalah I. (2019). Laboratory investigation into the effect of fines plasticity on the mechanical behavior of sand/fines mixtures. Transportation Infrastructure Geotechnology 8(3).438-451.
- [32] Benessalah, I., Arab, A., Villard, P., Sadek, M., &Kadri, A. (2016). Laboratory study on shear strength behaviour of reinforced sandy soil: effect of glass-fibre content and other parameters. Arabian Journal for Science and Engineering, 41, 1343-1353.
- [33] Ateş, A. (2016). Mechanical properties of sandy soils reinforced with cement and randomly distributed glass fibers (GRC). Composites Part B: Engineering, 96, 295-304.
- [34] Sadek, S., Najjar, S., &Abboud, A. (2013). Compressive strength of fiber-reinforced lightly-cement stabilized sand. In Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris.
- [35] Malidarreh, N. R., Shooshpasha, I., Mirhosseini, S. M., &Dehestani, M. (2018). Effects of reinforcement on mechanical behaviour of cement treated sand using direct shear and triaxial tests. International Journal of Geotechnical Engineering, 12(5), 491-499.
- [36] Al-Refeai, T. O. (1991). Behavior of granular soils reinforced with discrete randomly oriented inclusions. Geotextiles and Geomembranes, 10(4), 319-333.
- [37] Michalowski, R. L., & Zhao, A. (1996). Failure of fiber-reinforced granular soils. Journal of geotechnical engineering, 122(3), 226-234.
- [38] Di Prisco, C., & Nova, R. (1993).A constitutive model for soil reinforced by continuous threads. Geotextiles and Geomembranes, 12(2), 161-178.
- [39] Wu, T. H., Beal, P. E., &Lan, C. (1988). In-situ shear test of soil-root systems. Journal of Geotechnical Engineering, 114(12), 1376-1394.
- [40] Vaid, P.Y., Sivathayalan, S., Stedman, D.: Influence of specimen reconstituting method on the undrained response of sand. Geotech. Test. J. 22, 187–195 (1999).
- [41] Kuerbis, R., Vaid, Y.P.: Sand sample preparation—the slurry deposition method. Soils Found 28, 107–118 (1988).
- [42] Della, N., Belkhatir, M., Arab, A., Canou, J., &Dupla, J. C. (2014). Effect of fabric method on instability behavior of granular material. Acta Mechanica, 225(7), 2043-2057.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-37a9ff1e-5d3f-445a-a1d8-244ffb1344d4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.