Corrosion of materials used for car exhaust systems in road salt environment

• Autorzy: Jagielska-Wiaderek Karina , Golański Grzegorz

Identyfikatory

DOI

10.29354/diag/194849

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results and analysis of potentiokinetic investigation on materials used in elements of exhaust systems in combustion engine vehicles. The tests were performed for stainless steel X5CrNi18-10 and titanium 3.7035. The resistance to general corrosion and the susceptibility to pitting corrosion was determined for these materials in environments containing chloride ions ranging between 0.2÷1.0M. Moreover, the susceptibility to repassivation was examined. The performed tests showed high electrochemical stability of titanium and lack of the susceptibility to pitting corrosion in the applied environmental conditions. What was observed for the stainless steel was the development of pitting corrosion at ion concentration of [Cl^-] > 0.6 mol/dm3 , as well as the lack of influence of ion concentration on the repassivation potential.

Słowa kluczowe

EN

corrosion; stainless steel; titanium alloys; exhaust systems

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2024
• Tom: Vol. 25, No. 4
• Strony: art. no. 2024410
• Opis fizyczny: Bibliogr. 29 poz., rys., tab.

Twórcy

autor

Jagielska-Wiaderek Karina

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology. Poland

• https://orcid.org/0000-0002-6230-8532

autor

Golański Grzegorz

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology. Poland

• https://orcid.org/0000-0002-2093-4674

Bibliografia

• 1. Gümpel P, Schiller D, Arlt N, Bouchholz D. Simulation of corrosion behaviour of stainless steels in passenger car exhaust systems. ATZ worldwide 2004; 106(4): 18-20. https://doi.org/10.1007/BF03224662.
• 2. Wei Z. Characterization of materials for exhaust systems under combined mechanical and corrosive environment. 2013-01-2420. c.
• 3. Chang S, Jun JH. Corrosion resistance of automotive exhaust materials. Journal of Materials Science Letters 1999; 18(5): 419-21. https://doi.org/10.1023/A:1006613624476.
• 4. Kim MJ, Jang SI, Woo SH, Kim JG, Kim YH. corrosion resistance of ferritic stainless steel in exhaust condensed water containing aluminum cations. Corrosion 2015; 71(3): 285-91. https://doi.org/10.5006/1408.
• 5. Doche ML, Hihn JY, Mandroyan A, Maurice C, Hervieux O, Roizard X. A novel accelerated corrosion test for exhaust systems by means of power ultrasound. Corrosion Science 2006; 48(12): 4080-93. https://doi.org/10.1016/j.corsci.2006.04.009.
• 6. Yasir M, Mori G, Wieser H, Schattenkirchner M, Hogl M. A new testing method for lifetime prediction of automotive exhaust silencers. International Journal of Corrosion 2011; 2011: 1-5. https://doi.org/10.1155/2011/689292.
• 7. Chang S, Jun JH. Corrosion resistance of automotive exhaust materials. Journal of Materials Science Letters 1999; 18: 419-421. https://doi.org/10.1023/A:1006613624476.
• 8. Lippold JC, Kotecki DJ. Welding metallurgy and weldability of stainless steel. Wiley-Interscience 2005.
• 9. Hoffmann C, Gümpel P. Pitting corrosion in the wet section of the automotive exhaust systems. Journal of Achievements of Materials and Manufacturing Engineering 2009; 34(2): 115-121.
• 10. Lavrenko VA, Shvets VA, Makarenko GN. Comparative study of the chemical resistance of titanium nitride and stainless steel in media of the oral cavity. Powder Metallurgy and Metal Ceramics 2001; 40(11/12): 630-6. https://doi.org/10.1023/A:1015296323497.
• 11. Utomo WB, Donne SW. Electrochemical behaviour of titanium in H2SO4-MnSO4 electrolytes. Electrochimica Acta 2006; 51(16): 3338-45. https://doi.org/10.1016/j.electacta.2005.09.031.
• 12. Gurrappa I. Characterization of titanium alloy Ti-6Al4V for chemical, marine and industrial applications. Materials Characterization 2003; 51(2-3): 131-9. https://doi.org/10.1016/j.matchar.2003.10.006.
• 13. Donachie MJ. Titanium - A technical guide, 2nd Edition. ASM International 2000.
• 14. Muñoz-Portero MJ, García-Antón J, Guiñón JL, Leiva-García R. Pourbaix diagrams for titanium in concentrated aqueous lithium bromide solutions at 25°C. Corrosion Science 2011; 53(4): 1440-50. https://doi.org/10.1016/j.corsci.2011.01.013.
• 15. Noël JJ, Ebrahimi N, Shoesmith DW. Corrosion of titanium and titanium alloys. Encyclopedia of Interfacial Chemistry 2018 s. 192-200. https://doi.org/10.1016/B978-0-12-409547-2.13834-X.
• 16. Khoma MS, Pomaniv OM, Kuntyi OI, Tymchyshyn AI. Anodic behaviour of titanium in acid sulfate electrolytes for copper plating. Materials Science 2000; 36(5): 780-3. https://doi.org/10.1023/A:1011332513343.
• 17. Aragon E, Woillez J, Perice C, Tabaries F, Sitz M. Corrosion resistant material selection for the manufacturing of marine diesel exhausts scrubbers. Materials & Design 2009; 30(5): 1548-55. https://doi.org/10.1016/j.matdes.2008.07.053.
• 18. Idzior M, Karpiuk W, Bor M, Smolec R. Modern solutions used in motorcycle engines. Autobusy 2017; 6: 743-748.
• 19. Muslim MT, Selamat H, Alimin AJ, Mohd Rohi N, Hushim MF. A review on retrofit fuel injection technology for small carburetted motorcycle engines towards lower fuel consumption and cleaner exhaust emission. Renewable and Sustainable Energy Reviews 2014; 35: 279-84. https://doi.org/10.1016/j.rser.2014.04.037.
• 20. Šolic T, Maric D, Suhi S, Samardžic I. Analysis of the vehicle exhaust system corrosion and its effect on the eco-test result. Metalurgija 2022; 61(3-4): 841-844.
• 21. Gazdowicz J, Radwański K, Rybarz M. Influence of exhaust system operating conditions on corrosion of high-alloy ferritic steel silencer jackets. Prace Instytutu Metalurgii Żelaza 2007; 59(3): 24-30.
• 22. Żaba K, Nowak S, Kąc S. Examinations of corrosion resistance Al-Si coated tubes to be ussed as elements of exhaust systems. Laboratory researches. Rudy i Metale Nieżelazne 2005; 50(12): 679-685.
• 23. Jagielska-Wiaderek K. Structure of outer layer of stainless steels after high-temperature chemical treatments and their susceptibility to local corrosion. Ochrona przed Korozją 2012; 11: 491-494.
• 24. Bala H, Giza K, Jagielska K. Evaluation of pitting corrosion development using bi-direction polarization technique. IXth International Corrosion Symposium and Exhibition Ankara, ICCP Proceedings 2004; 1: 123-128.
• 25. Perez N. Electrochemistry and Corrosion Science Springer 2016. https://doi.org/10.1007/978-3-319-24847-9.
• 26. Brojanowska A, Ossowski M, Sobiecki JR, Wierzchoń T. Corrosion resistance in Ringer solution of titanium alloy Ti6Al4V after low-temperature glow-discharge nitriding and carbonitriding. Inżynieria Materiałowa 2008; 6: 963-966.
• 27. Richardson TJA. Shreir’s Corrosion. 1st Edition, Elsevier - Acad. Press 2009.
• 28. Leda H. Materiały inżynierskie w zastosowaniu biomedycznym. II Eds. Wydawnictwo Politechniki Poznańskiej 2012.
• 29. Szklarska-Smiałowska Z. Pitting and Crevice Corrosion. NACE International, Houston 2005.