Contact interaction of rigid stamp and infinite orthotropic plate with close to elliptical hole

• Autorzy: Kotsyuba A.
• Języki publikacji: EN

Abstrakty

EN

Numerical method of finding the contact stresses under the stamp of complex shape for the case of orthotropic plates with close to an elliptical hole, which based on constructed in Bozhydarnik et al., (2007) algorithm, is developed. The distribution of contact stresses under the stamp, which shape matches the shape of the hole, is investigated

Słowa kluczowe

EN

orthotropic; elliptical hole; numerical method; contact stresses

PL

ciało ortotropowe; metoda numeryczna; naprężenia kontaktowe

• Wydawca: Oficyna Wydawnicza Politechniki Białostockiej
• Czasopismo: Acta Mechanica et Automatica
• Rocznik: 2013
• Tom: Vol. 7, no. 4
• Strony: 230--235
• Opis fizyczny: Bibliogr. 11 poz.., rys., wykr.

Twórcy

autor

Kotsyuba A.

• Lutsk National Technical University, Lvivska Str. 75, 43018 Lutsk, Ukraine [e-mail]

Bibliografia

• 1. Abd-El-Naby S.F.M., Hollaway L., Gunn M. (1993), The tangential stresses in an infinite orthotropic composite plate with a loaded hole Original Research Article, Composites Engineering, Vol. 3, Issue 1, 19-30.
• 2. Bozhydarnik V.M., Kotsyuba A.Yu., Maksimovic O.V. (2007), Con-tact interaction of arbitrary shape stamp and plate with elliptical hole, Bulletin of Dnipropetrovsk University Series: Mechanics, Edition 11, Vol. 2, No 2/2, 29–34, (in Ukrainian).
• 3. Kombel S.M. (2003), Landing of hard drive into elliptical hole of in-finite orthotropic plate, Engineering, No 8, 29–34, (in Ukrainian).
• 4. Maksimovic V.M., Kotsyuba A.Yu., Lavrenchuk S.V. (2012), Plane contact problems of elasticity theory for bodies of complex shape, LNTU, Lutsk, (in Ukrainian).
• 5. Panasyuk V.V., Tepliy M.Y. (1975), Some contact problems of the theory of elasticity, Naukova Dumka, Kyiv, (in Ukrainian).
• 6. Savin G.H. (1968), The stress distribution around the holes, Naukova Dumka, Kyiv, (in Russian).
• 7. Syackyj A.O, Shynkarchuk N.V. (2010), Mixed contact problem for orthotropic plate with elliptical hole and rigid disk, Herald of Ternopil National Technical University, Vol. 15, No 4, 7–13, (in Ukrainian).
• 8. Syackyj A.O, Shynkarchuk N.V. (2011), Mixed contact problem for isotropic plate with curvilinear hole and rigid disk, Herald of Ternopil National Technical University, Vol. 16, No 1, 16–21, (in Ukrainian).
• 9. Syackyj A.O, Trokhymchuk O.Ya. (2009), Pressure rigid stamp with corner points on a partially strengthened contour elliptic hole in infinite orthotropic plate, Herald of Ternopil State Technical University, Vol. 14, No 3, 12–18, (in Ukrainian).
• 10. Syackyj A.O, Trokhymchuk O.Ya. (2010a), Mixed contact problem for a plate with a curvilinear hole and the system of stamps with corner points, Herald of National Technical University of Ukraine "Kyiv Poly-technic Institute". Series of "Mechanical Engineering", No 58, 36–41, (in Ukrainian).
• 11. Syackyj A.O, Trokhymchuk O.Ya. (2010b), Pressure system of two stamps with corner points on a partially strengthened contour elliptic hole orthotropic plate, Herald of Ternopil State Technical University, Vol. 15, No 1, 14–20, (in Ukrainian).