PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Recovery of cobalt and nickel by atmospheric leaching of flotation sulfide concentrate from lubin concentrator

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
An experimental study on leaching of cobalt and nickel from a Lubin (Poland) sulfide flotation copper concentrate with oxygenated sulphuric acid solution in the presence of iron(III) sulfate is presented. The effect of temperature, iron(III) concentration, initial sulphuric acid concentration, oxygen flow rate and chloride ions addition on cobalt and nickel leaching were examined. The obtained results show, that enhancing investigated leaching parameters increases both the rate and leaching recovery of nickel and cobalt. The effect of iron(III) ions concentration is particularly significant. Additionally, a significant correlation between copper and nickel/cobalt leaching recovery was observed. Due to the fine dissemination of nickel and cobalt, they were leached remarkably faster when copper leaching recovery exceeded 90%.
Rocznik
Strony
191--203
Opis fizyczny
Bibliogr. 23 poz., rys., tab.
Twórcy
autor
  • Wroclaw University of Technology, Faculty of Chemistry, Division of Chemical Metallurgy Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
autor
  • Wroclaw University of Technology, Faculty of Chemistry, Division of Chemical Metallurgy Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
  • Wroclaw University of Technology, Faculty of Chemistry, Division of Chemical Metallurgy Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
autor
  • Wroclaw University of Technology, Faculty of Chemistry, Division of Chemical Metallurgy Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
Bibliografia
  • 1. BACHOWSKI C., STASZAK J., BYSZYNSKI L., BOCZAR W., TEODORSKI D., 2003, Search for alternative methods of processing of copper ores in KGHM ,, Polska Miedz’’ S.A. – hydrometallurgical technologies, VIII Seminar ,,Hydrometallurgy of Sulphide Copper Resources’’, Lubin, June 26. 2003: 125, (In Polish).
  • 2. CHMIELEWSKI T., 2012. Hydrometallurgy in KGHM Polska Miedz SA – Circumstances, Needs and Perspectives of Application, Separation Science and Technology 47, 9, 1264-1277.
  • 3. CHMIELEWSKI T., CHAREWICZ W., 1984. Pressure leaching of sulphide copper concentrate with simultaneous regeneration of the leaching agent, Hydrometallurgy 13, 63-72.
  • 4. CHMIELEWSKI T., CHAREWICZ W., 2006, Hydrometallurgical processing of shale by-products from beneficiation circuits of Lubin Concentrator, In: Perspectives for applying bioleaching Technology to process shale-bearing copper ores, BIOPROCOP’06, Lubin 2006, KGHM Cuprum, Wroclaw 2006, 125-145.
  • 5. CHMIELEWSKI T., LUSZCZKIEWICZ A., KONOPACKA Z., Acidic pretreatment of hard-to-tread copper ore flotation middlings to facilitate flotation efficiency. Proceedings of XXIV International Mineral Processing Congress, Beijing 24-28 Sept. 2008, Vol. 3, Wang D.D., Sun C.Y., Wang F.L., Zhang L.C., Han L. (Eds), Science Press, 1189-1200
  • 6. DREISINGER D., 2006. Copper leaching from primary sulfides: Options for biological and chemical extraction of copper, Hydrometallurgy 83, 10 – 20.
  • 7. GROTOWSKI A. 2007. Possibilities and perspectives for implementation of hydrometallurgical methods in KGHM Polska Miedz S.A., Proc. VIII International Conference on Non-ferrous Ore Processing, Wojcieszyce (Poland), May 21–23, KGHM Cuprum Wroclaw 2007.
  • 8. GUPTA C.K., MUKHERJEE T.K., 1990. Hydrometallurgy in Extraction Processes, Vol. I and II; CRC Press: Boca Raton, FL.
  • 9. HABASHI F., 1999, Textbook of hydrometallurgy, Metall. Extract. Quebec.
  • 10. HABASHI F., 2005, Recent Advances in the Hydrometallurgy of Copper, Proc. Int. Copper Hydrometallurgy Workshop “Hydrocopper 2005” (Menacho J.M., Casas de Prada J.M., Eds.), Santiago, Chile, pp. 43-55.
  • 11. HABASHI F., 2007, Abandoned but not forgotten – the recent history of copper hydrometallurgy, The John Dutrizac Symposium on Copper Hydrometallurgy, Proceedings 6th International Copper-Cobre International Conference, August 3-20, 2007, Toronto, Canada, vol. IV, Met. Soc.
  • 12. JANSEN M., TAYLOR A., 2000, Key elements in the selection of sulphide leach processes for copper concentrate leaching, Alta Cu 2000, August 2000, Int. Proj. Dev. Serv. Pty Ltd.,
  • 13. KONIECZNY A., KASIŃSKA-PILUT E., PILUT R., 2009. Technological and technical problems in mineral processing of Polish copper ores at Division of Concentrators KGHM ‘‘Polska Miedz’’ SA, Proc. IX International Conference on Non-Ferrous Ore Processing, ICNOP Ladek Zdroj (in Polish), 18–20 May 2009: 11, in Polish.
  • 14. KUKUC R., BAZAN B., Improvement of technology indices of DoC Lubin Plant within the context of decreasing copper content in ore, Proceedings of the Mineral Engineering Conference MEC2013, Kowalczuk P.B. (ed.), Swieradow-Zdroj, Poland, 16-19 September 2013, pp. 95-108
  • 15. LUSZCZKIEWICZ A., 2000, Utilisation of black copper shale ores from Lubin-Glogow region. in: Recent problems on copper ores processing in Poland, November 16, 2000., Conference Proceedings, Mining Committee of Polish Academy of Sciences and KGHM “Polish Copper”, 137-156 (in Polish).
  • 16. LUSZCZKIEWICZ A., 2009, Physicochemical Problems of Minerals Processing Seminar, Niepolomice, Poland, 16-18 Sept, 2009, plenary lecture.
  • 17. MARSDEN J.O., WILMOT J.C., 2007a, Medium-temperature pressure leaching of copper concentrates – Part I: Chemistry and initial process development, Min. Metall. Processing, 24(4) 193-204.
  • 18. MARSDEN J.O., WILMOT J.C., 2007b, Medium-temperature pressure leaching of copper concentrates – Part II: Development of direct electrowinning and acid-autogenous process, Min. Metall. Processing, 24(4) 205-217.
  • 19. MARSDEN J.O., WILMOT J.C., 2007c, Medium-temperature pressure leaching of copper concentrates – Part III: Commercial demonstration at Bagdad, Arizona, Min. Metall. Processing, 24(4) 218-225.
  • 20. MARSDEN J.O., WILMOT J.C., 2007d, Medium-temperature pressure leaching of copper concentrates – Part IV: Application at Morenci, Arizona, Min. Metall. Processing, 24(4) 226-236.
  • 21. MARSDEN J.O., 2007e, Sulphate-based flowsheet options for hydrometallurgical treatment of copper sulphide concentrates, The John Dutrizac Symposium on Copper Hydrometallurgy, Proceedings 6th International Copper-Cobre Conference, August 25-30, 2007, Toronto, Canada, vol. IV, Met. Soc., pp.77-100.
  • 22. PEACEY J.I., GUO X.J., ROBLES E., 2003, Copper Hydrometallurgy – Current Status, Preliminary economics, Future Direction and Positioning versus Smelting, Copper 2003 - Cobre 2003, vol.VI, (Book 1) Santiago – Chile (Riveros P.A., Dixon D., Dreisinger D., Eds.), pp. 205-222.
  • 23. RAMACHADRAN V., LAKSMANAN V.I., KONDOS P.D., 2007, Hydrometallurgy of copper sulphide concentrate, The John Dutrizac Symposium on Copper Hydrometallurgy, Proceedings 6th International Copper-Cobre Conference, August 25-30, 2007, Toronto, Canada, vol. IV, Met. Soc., pp.101-128.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-372a5cb3-31a2-4223-8f1d-a7bf0b84cffc
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.