Antibacterial Effect of Graphene and Graphene Oxide as a Potential Material for Fiber Finishes

• Autorzy: Olborska Anna , Janas-Naze Anna , Kaczmarek Łukasz , Warga Tomasz , Che Halin Dewi Suriyani

Identyfikatory

DOI

10.2478/aut-2020-0009

• Języki publikacji: EN

Abstrakty

EN

The dynamic development of the world economy entails an increasing exchange of goods and population. This means that we are globally struggling with increasing levels of nosocomial infections. The increasing use of antimicrobial agents triggers the microorganisms’ immune system, which in turn contributes to the increasing amount of antibiotic-resistant microorganisms, making it necessary to control the development of unwanted microorganisms, including bacteria, especially those carried on the body and clothing. Currently, there is no unique method to combat the multiplication of microorganisms and eliminate threats to human health and life. For this reason, this article describes the possibilities of using graphene materials as a potential additive materials in fiber finishes as an antibacterial aspect in various areas of life. However, the literature does not explain the mechanisms behind the antibacterial properties of graphene, strongly limiting its textile application. The research is conducted using molecular dynamic simulations of interaction between graphene materials and murein. The obtained results suggest the electrostatic mechanism of blocking the growth and division of bacteria. Due to the physical interaction, bacterial cell becomes “trapped” without changing its growth parameters. This may lead to an increase of internal cell pressure, rupture of its wall and consequently its death.

Słowa kluczowe

EN

graphene; antimicrobial fibres; nanofibers

PL

grafen; włókna przeciwbakteryjne; nanowłókna

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2020
• Tom: Vol. 20, no. 4
• Strony: 506--516
• Opis fizyczny: Bibliogr. 41 poz.

Twórcy

autor

Olborska Anna

• Department of the Oral Surgery, Central Clinical Hospital, Medical University of Lodz, Pomorska 251 St., 92-213, Łódź, Poland

autor

Janas-Naze Anna

• Department of the Oral Surgery, Central Clinical Hospital, Medical University of Lodz, Pomorska 251 St., 92-213, Łódź, Poland

autor

Kaczmarek Łukasz

• Institute of Materials Science and Engineering, Lodz University of Technology, Stefanowskiego 1/15 St., 90-924, Łódź, Poland

autor

Warga Tomasz

• Institute of Materials Science and Engineering, Lodz University of Technology, Stefanowskiego 1/15 St., 90-924, Łódź, Poland

autor

Che Halin Dewi Suriyani

• Centre of Excellence Geopolymer and Green Technology, School of Materials Engineering, Jalan Kangar-Arau, 02600 Arau, Perlis, Malaysia

Bibliografia

• [1] Q. Tarrés, E. Espinosa, J. Domínguez-Robles, A. Rodríguez, P. Mutjé, and M. Delgado-Aguilar, “The suitability of banana leaf residue as raw material for the production of high lignin content micro/nano fibers: From residue to value-added products,” Ind. Crops Prod., vol. 99, pp. 27–33, May 2017.
• [2] Z. Kassab et al., “Identifying Juncus plant as viable source for the production of micro- and nano-cellulose fibers: Application for PVA composite materials development,” Ind. Crops Prod., vol. 144, p. 112035, Feb. 2020.
• [3] D. Flores, J. Villarreal, J. Lopez, and M. Alcoutlabi, “Production of carbon fibers through Forcespinning® for use as anode materials in sodium ion batteries,” Mater. Sci. Eng. B, vol. 236–237, pp. 70–75, Oct. 2018.
• [4] S. Jang, S. G. Bae, D.-G. Shin, K. Cho, Y. Lee, and Y. Lee, “Characteristics of polycarbosilanes produced under different synthetic conditions and their influence on SiC fibers: Part I,” Ceram. Int., Nov. 2019.
• [5] Y. Zhang et al., “Functional & enhanced graphene/polyamide 6 composite fiber constructed by a facile and universal method,” Compos. Part A Appl. Sci. Manuf., vol. 123, pp. 149–157, Aug. 2019.
• [6] T. Pulingam et al., “Graphene oxide exhibits differential mechanistic action towards Gram-positive and Gram-negative bacteria,” Colloids Surfaces B Biointerfaces, vol. 181, pp. 6–15, Sep. 2019.
• [7] L. Mei et al., “Amino-Functionalized Graphene Oxide for the Capture and Photothermal Inhibition of Bacteria,” ACS Appl. Nano Mater., vol. 2, no. 5, pp. 2902–2908, May 2019.
• [8] J. A. Tamayo Marín et al., “Biocompatible and Antimicrobial Electrospun Membranes Based on Nanocomposites of Chitosan/Poly (Vinyl Alcohol)/Graphene Oxide,” Int. J. Mol. Sci., vol. 20, no. 12, p. 2987, Jun. 2019.
• [9] F. Schedin et al., “Detection of individual gas molecules adsorbed on graphene,” Nat. Mater., vol. 6, p. 652, Jul. 2007.
• [10] F. Bonaccorso et al., “2D materials. Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage.,” Science (80-. )., vol. 347, p. 6217, 2015.
• [11] Y. Hou, S. Lv, L. Liu, and X. Liu, “High-quality preparation of graphene oxide via the Hummers’ method: Understanding the roles of the intercalator, oxidant, and graphite particle size,” Ceram. Int., vol. 46, no. 2, pp. 2392–2402, Feb. 2020.
• [12] N. I. Zaaba, K. L. Foo, U. Hashim, S. J. Tan, W.-W. Liu, and C. H. Voon, “Synthesis of Graphene Oxide using Modified Hummers Method: Solvent Influence,” Procedia Eng., vol. 184, pp. 469–477, 2017.
• [13] N. Yadav and B. Lochab, “A comparative study of graphene oxide: Hummers, intermediate and improved method,” FlatChem, vol. 13, pp. 40–49, Jan. 2019.
• [14] M. H. A. Kudus, M. R. Zakaria, H. M. Akil, F. Ullah, and F. Javed, “Oxidation of graphene via a simplified Hummers’ method for graphene-diamine colloid production,” J. King Saud Univ. - Sci., vol. 32, no. 1, pp. 910–913, Jan. 2020.
• [15] A. Ouerghi et al., “Large-Area and High-Quality Epitaxial Graphene on Off-Axis SiC Wafers,” ACS Nano, vol. 6, no. 7, pp. 6075–6082, Jul. 2012.
• [16] P. Kula et al., “Functionality of graphene as a result of its heterogenic growth on SiC nanoparticles on the basis of reversible hydrogen storage,” Int. J. Hydrogen Energy, vol. 39, no. 34, pp. 19662–19671, 2014.
• [17] Z. Yang et al., “A new direct growth method of graphene on Si-face of 6H-SiC by synergy of the inner and external carbon sources,” Appl. Surf. Sci., vol. 436, pp. 511–518, Apr. 2018.
• [18] P. Trinsoutrot, H. Vergnes, and B. Caussat, “Three dimensional graphene synthesis on nickel foam by chemical vapor deposition from ethylene,” Mater. Sci. Eng. B Solid-State Mater. Adv. Technol., vol. 179, no. 1, pp. 12–16, 2014.
• [19] M. S. Yazici, M. A. Azder, and O. Salihoglu, “CVD grown graphene as catalyst for acid electrolytes,” Int. J. Hydrogen Energy, vol. 43, no. 23, pp. 10710–10716, 2018.
• [20] M. P. Lavin-Lopez, J. L. Valverde, S. Ordoñez-Lozoya, A. Paton-Carrero, and A. Romero, “Role of inert gas in the Cvd-graphene synthesis over polycrystalline nickel foils,” Mater. Chem. Phys., vol. 222, no. September 2018, pp. 173–180, 2019.
• [21] P. Zeller et al., “Detachment of CVD-grown graphene from single crystalline Ni films by a pure gas phase reaction,” Surf. Sci., vol. 653, pp. 143–152, Nov. 2016.
• [22] T. Kinoshita, S. Maruyama, and Y. Matsumoto, “Ionic liquid wettability of CVD-grown graphene on Cu/α-Al2O3(0 0 0 1) characterized by in situ contact angle measurement in a vacuum,” Chem. Phys. Lett., vol. 735, p. 136781, Nov. 2019.
• [23] P. Kula et al., “High strength metallurgical graphene for hydrogen storage nanocomposites,” Vacuum, vol. 129, pp. 79–85, 2016.
• [24] C. Liu, Y. Tang, P. Huo, and F. Chen, “Novel AgCl/CNTs/g-C3N4 nanocomposite with high photocatalytic and antibacterial activity,” Mater. Lett., vol. 257, p. 126708, Dec. 2019.
• [25] S. Liu et al., “Antibacterial Activity of Graphite, Graphite Oxide, Graphene Oxide, and Reduced Graphene Oxide: Membrane and Oxidative Stress,” ACS Nano, vol. 5, no. 9, pp. 6971–6980, Sep. 2011.
• [26] H. Fallatah, M. Elhaneid, H. Ali-Boucetta, T. W. Overton, H. El Kadri, and K. Gkatzionis, “Antibacterial effect of graphene oxide (GO) nano-particles against Pseudomonas putida biofilm of variable age,” Environ. Sci. Pollut. Res., vol. 26, no. 24, pp. 25057–25070, Aug. 2019.
• [27] N. Yadav et al., “Graphene Oxide-Coated Surface: Inhibition of Bacterial Biofilm Formation due to Specific Surface–Interface Interactions,” ACS Omega, vol. 2, no. 7, pp. 3070–3082, Jul. 2017.
• [28] L. Elias, R. Taengua, B. Frígols, B. Salesa, and Á. Serrano-Aroca, “Carbon Nanomaterials and LED Irradiation as Antibacterial Strategies against Gram-Positive Multidrug-Resistant Pathogens,” Int. J. Mol. Sci., vol. 20, no. 14, p. 3603, Jul. 2019.
• [29] F. Li et al., “Natural Biodegradable Poly(3-hydroxybutyrate- co -3-hydroxyvalerate) Nanocomposites with Multifunctional Cellulose Nanocrystals/Graphene Oxide Hybrids for High-Performance Food Packaging,” J. Agric. Food Chem., vol. 67, no. 39, pp. 10954–10967, Oct. 2019.
• [30] S. Khorrami, Z. Abdollahi, G. Eshaghi, A. Khosravi, E. Bidram, and A. Zarrabi, “An Improved Method for Fabrication of Ag-GO Nanocomposite with Controlled Anti-Cancer and Anti-bacterial Behavior; A Comparative Study,” Sci. Rep., vol. 9, no. 1, p. 9167, Dec. 2019.
• [31] Y. Yang et al., “Synergistic Photocatalytic-Photothermal Contribution to Antibacterial Activity in BiOI-Graphene Oxide Nanocomposites,” ACS Appl. Bio Mater., vol. 1, no. 6, pp. 2141–2152, Dec. 2018.
• [32] A. Sharma et al., “Structural, electronic structure and antibacterial properties of graphene-oxide nano-sheets,” Chem. Phys. Lett., vol. 698, pp. 85–92, Apr. 2018.
• [33] A. Filina, N. Yousefi, M. Okshevsky, and N. Tufenkji, “Antimicrobial Hierarchically Porous Graphene Oxide Sponges for Water Treatment,” ACS Appl. Bio Mater., vol. 2, no. 4, pp. 1578–1590, Apr. 2019.
• [34] M. Li et al., “Graphene Oxide and Lysozyme Ultrathin Films with Strong Antibacterial and Enhanced Osteogenesis,” Langmuir, p. acs.langmuir.9b00035, May 2019.
• [35] J. Jira et al., “Inhibition of E. coli Growth by Nanodiamond and Graphene Oxide Enhanced by Luria-Bertani Medium,” Nanomaterials, vol. 8, no. 3, p. 140, Mar. 2018.
• [36] Y. Liang et al., “Facile synthesis of ZnO QDs@GO-CS hydrogel for synergetic antibacterial applications and enhanced wound healing,” Chem. Eng. J., vol. 378, p. 122043, Dec. 2019.
• [37] F. Yaghoubidoust and E. Salimi, “A Simple Method for the Preparation of Antibacterial Cotton Fabrics by Coating Graphene Oxide Nanosheets,” Fibers Polym., vol. 20, no. 6, pp. 1155–1160, Jun. 2019.
• [38] L. Jia, X. Huang, H. Liang, and Q. Tao, “Enhanced hydrophilic and antibacterial efficiencies by the synergetic effect TiO2 nanofiber and graphene oxide in cellulose acetate nanofibers,” Int. J. Biol. Macromol., vol. 132, pp. 1039–1043, Jul. 2019.
• [39] J. Hu, J. Liu, L. Gan, and M. Long, “Surface-Modified Graphene Oxide-Based Cotton Fabric by Ion Implantation for Enhancing Antibacterial Activity,” ACS Sustain. Chem. Eng., vol. 7, no. 8, pp. 7686–7692, Apr. 2019.
• [40] S. Sun et al., “A bifunctional melamine sponge decorated with silver-reduced graphene oxide nanocomposite for oil-water separation and antibacterial applications,” Appl. Surf. Sci., vol. 473, pp. 1049–1061, Apr. 2019.
• [41] E. Aliyev et al., “ Structural Characterization of Graphene Oxide: Surface Functional Groups and Fractionated Oxidative Debris,” Nanomaterials, vol. 9 Aug. 2019.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).