Identyfikatory
Warianty tytułu
Wpływ izotermicznego wygrzewania na defekty struktury w stopie Fe64Co10Y6B20
Języki publikacji
Abstrakty
This work presents the results of investigations into the structural and magnetic properties of the bulk amorphous alloy: Fe64Co10Y6B20. The structure, thermal stability and magnetic properties of the alloy were studied using: X-ray diffractometry, differential scanning calorimetry (DSC), and a vibrating sample magnetometer (VSM), respectively. The investigations were performed on samples of the alloy in both the ‘as-cast’ state, and the state resulting from a process of isothermal annealing at a temperature of 750 K for 30 minutes. The aim of the conducted studies was to relax the structure and improve the soft magnetic properties of the investigated alloy. The results show that annealing the alloy at a temperature well below its crystallisation temperature leads to an increase in the value of the saturation magnetisation and a decrease in the value of the coercivity. Utilising the ‘approach to the ferromagnetic saturation’ theorem, the nature of structural defects within the investigated material has been established. For both ‘as-cast’ and isothermally-annealed samples, the magnetisation process has been found to be connected with the existence of linear structural defects.
W pracy przedstawiono wyniki badań struktury oraz właściwości magnetycznych masywnego stopu amorficznego Fe64Co10Y6B20. Strukturę stopu badano wykorzystując dyfrakcję promieni rentgenowskich, stabilność termiczną z wykorzystaniem różnicowej kalorymetrii skaningowej DSC, a właściwości magnetyczne przy użyciu magnetometru wibracyjnego VSM. Badania przeprowadzono dla próbek stopu w stanie po zestaleniu oraz po procesie izotermicznego wygrzewania w temperaturze 750 K w czasie 30 min. Celem prowadzonych badań było zrelaksowanie struktury i poprawa właściwości magnetycznie miękkich badanego stopu. Na podstawie uzyskanych wyników stwierdzono, ze wygrzewanie stopu w temperaturze znacznie niższej od temperatury krystalizacji prowadzi do zwiększenia magnetyzacji nasycenia oraz zmniejszenia wartości pola koercji. Wykorzystując teorię podejścia do ferromagnetycznego nasycenia określono rodzaj defektów struktury badanego materiału. Zarówno dla próbki w stanie po zestaleniu jak i po izotermicznym wygrzewaniu proces magnesowania związany jest z obecnością liniowych defektów struktury.
Wydawca
Czasopismo
Rocznik
Tom
Strony
1987--1991
Opis fizyczny
Bibliogr. 26 poz., rys., tab., wykr., wzory
Twórcy
autor
- Czestochowa University of Technology, Institute of Physics, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland
Bibliografia
- [1] J. Garus, S. Garus, M. Nabiałek, M. Szota, Acta Phys.Pol. A 126, 954-956 (2014).
- [2] P. Duwez and R. H. Willens, Rapid Quenching of Liquid Alloys, T. Metall. Soc. Aime 227, 362–365 (1963).
- [3] K. Błoch, J. Magn. Magn. Mater. 390 118-122 (2015).
- [4] J. Gondro, K. Błoch, M. Nabiałek, S. Walters, Acta Phys. Pol. A 127, 606-607 (2015).
- [5] A. Inoue, Mat. Sci. Eng. A226-228, 357-363 (1997).
- [6] K. Błoch, M. Nabiałek, Acta Phys. Pol. A 127, 442-444 (2015).
- [7] H.S. Chen, C.E. Miller, Rev. Sci. Instrum. 41, 1237 (1970).
- [8] M. Nabiałek, P. Pietrusiewicz, M. Szota, M. Dośpiał, J. Jędryka, K. Szota, S. Lesz, Arch. Metall. Mater. 57, 223–227 (2012).
- [9] P. Pietrusiewicz, M. Nabiałek, M. Szota, K. Perduta, Arch. Metall. Mater. 57, 265–270 (2012).
- [10] M. Nabiałek, M. Szota, M. Dośpiał, P. Pietrusiewicz, S. Walters, J. Magn. Magn. Mater. 322, 3377–3380 (2010).
- [11] A. Inoue, Acta mater. 48, 279–306 (2000).
- [12] A. Inoue, Mater. Trans. JIM 36 (7), 886–875 (1995).
- [13] A. Inoue, Mater. Sci. Eng. A 304–306, 1–10 (2001)
- [14] T. Zhang, A. Inou, Mater. Trans. 43, 708–711 (2002).
- [15] M. Vazquez, W. Fernengel, H. Kronmuller, Phys. Stst. Sol. (a) 115, 547 (1989).
- [16] K. Błoch, M. Nabiałek, Acta Phys. Pol. A 127 (2) 413-414 (2015).
- [17] H.Chiriac, N.Lupu, Physica B 299, 293–301 (2001).
- [18] K. Sobczyk, et al., Journal of Magnetism and Magnetic Materials 324, 540-549 (2012).
- [19] H. Kronmüller, J. Appl. Phys. 52, (3), 1859 – 1864 (1981).
- [20] M. Nabialek, M. Dospial, M. Szota, P. Pietrusiewicz, Mater. Sci. Forum 654-656, 1074 (2010).
- [21] H. Kronmüller, J. Ulner, J. Magn. Magn. Mater. 6, 52 (1977).
- [22] H. Kronmüller, IEEE Trans. Magn., MAG-15, 5, 1218-1225 (1979).
- [23] T. Holstein, H. Primakoff, Phys. Rev.58, 1098 (1940).
- [24] S. Garus, M. Nabiałek, K. Błoch, J. Garus, Acta Phys.Pol. A 126, 957-959 (2014).
- [25] M. Vázquez, W. Fernengel, H. Kronmüller, Phys. Stat. Sol. (a) 115, (1989).
- [26] M. Hischer, R. Reisser, R. Würschum, H. E. Schaefer, H. Kronmüller, J. Magn. Magn. Mat. 146 (1995).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-36dd98f8-999a-4be9-b73d-5c3642408fca