Development of High Entropy Alloy as Catalyst for Azo Dye Degradation in Fenton Process

• Autorzy: Hassan Nur Hudawiyah Abu , Nasir Nisa Syukrina Mat , Rahman S. N. A. , Irfan Abd Rahim , Nordin Norhuda Hidayah

Identyfikatory

DOI

10.24425/amm.2023.141496

• Języki publikacji: EN

Abstrakty

EN

Azo dye is widely used in the textile industry since it is cost effective and simple to use. However, it becomes a continuous source of environmental pollution due to its carcinogenicity and toxicity. Various methods had been used to remove the azo dye in solution. One of the famous and frequently used is the Fenton process. The Fenton process is one of the advanced oxidation processes where iron catalysed hydrogen peroxide to generate hydroxyl radical. Treating azo dyes in solution requires a catalyst to enhance the process of degradation. Herein, high entropy alloys (HEAs) have been proposed as a catalytic material to enhance the performance of Fenton process for azo dye degradation. HEAs have been reported as a promising catalyst due to its high surface area. The higher the number of active sites, the higher the rate of azo dye degradation as more active sites are available for adsorption of azo dyes. The results have shown that HEAs can be used as a catalyst to fasten the Fenton reaction since the degradation time is proven to be shorter in the presence of HEAs. The method derived from the result of this study will contribute in treating azo dyes for wastewater management in the Fenton process.

Słowa kluczowe

EN

azo dye; catalyst; fenton process; high entropy alloys; HEAs

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 1
• Strony: 209--213
• Opis fizyczny: Bibliogr. 25 poz., fot., rys., tab., wykr.

Twórcy

autor

Hassan Nur Hudawiyah Abu

• International Islamic University Malaysia, Department of Manufacturing and Materials Engineering, Jalan Gombak, 53100 Kuala Lumpur, Malaysia

• https://orcid.org/0000-0001-6185-9650

autor

Nasir Nisa Syukrina Mat

• International Islamic University Malaysia, Department of Manufacturing and Materials Engineering, Jalan Gombak, 53100 Kuala Lumpur, Malaysia

• https://orcid.org/0000-0001-5282-3701

autor

Rahman S. N. A.

• International Islamic University Malaysia, Department of Manufacturing and Materials Engineering, Jalan Gombak, 53100 Kuala Lumpur, Malaysia

• https://orcid.org/0000-0002-3876-8694

autor

Irfan Abd Rahim

• Universiti Malaysia Perlis, Faculty of Mechanical Engineering Technology, Perlis, Malaysia
• Universiti Malaysia Perlis, Center of Excellence Geopolymer and Green Technology (CEGeoGTech), Perlis, Malaysia

• https://orcid.org/0000-0002-6606-9874

autor

Nordin Norhuda Hidayah

• International Islamic University Malaysia, Department of Manufacturing and Materials Engineering, Jalan Gombak, 53100 Kuala Lumpur, Malaysia

• https://orcid.org/0000-0002-6163-7369

Bibliografia

• [1] Y.L. Pang. A.Z. Abdullah, Clean Soil, Air and Water 41 (8), 751-764 (2013).
• [2] https://www.ellenmacarthurfoundation.org/publications/a-new-textiles-economy-redesigning-fashions-future, accessed: 17.01.2021
• [3] P.F. Gordon, P. Gregory, Organic chemistry in colour, Springer Science & Business Media (2012).
• [4] B.J. Brüschweiler, C. Merlot, Regulatory Toxicology and Pharmacology 88, 214-226 (2017).
• [5] R. Jamee, R. Siddique, European Journal of Microbiology and Immunology 9 (4), 114-118 (2019).
• [6] G. Matyszczak, K. Krzyczkowska, A. Fidler, Journal of Water Process Engineering 36, 101242 (2020).
• [7] S.K. Wu, Y. Pan, N. Wang, W. Dai, J. Lu, T. Lu, RSC Adv. 8 (72), 41347-41354 (2018).
• [8] P.V. Nidheesh, R. Gandhimathi, Desalination 299, 1-15 (2012).
• [9] S. Sabhi, J. Kiwi, Water Res. 35, 1994 (2001).
• [10] G. Matyszczak, A. Sędkowska, S. Kuś, Dyes and Pigments 174, 108076 (2020).
• [11] M. Azami, M. Bahram, S. Nouri, Current Chemistry Letters 2 (2), 57-68 (2013).
• [12] E. Severo, G.L. Dotto, S. Silvestri, I. Nunes, J.S. Salla, A. Martinez, K. Martinello, E.L. Foletto, Journal of Environmental Chemical Engineering 8, 103853 (2020).
• [13] D.B. Miracle, Nature Communications 10 (1), 1805 (2019).
• [14] X. Cui, B. Zhang, C. Zeng, S. Guo, MRS Communications 1 (2018).
• [15] S. Wang, H. Xin, Chem. 5 (3), 502-504 (2019).
• [16] M.H. Tsai, J.W. Yeh, Materials Research Letters 2 (3), 107-123 (2014).
• [17] M. Xu, C. Wu, Y. Zhou, Advanced Oxidation Processes - Applications, Trends, and Prospect 4 (2020).
• [18] E. Guivarch, S. Trevin, C. Lahitte, M.A. Oturan, Environ. Chem. Lett. 1, 38-44 (2003).
• [19] F. Sopaj, N. Oturan, J. Pinson, F. Podvorica, M. Oturan, Applied Catalysis B: Environmental 199, 331-341 (2016).
• [20] M. Nabiałek, M. Szota, M. Dośpiał, P. Pietrusiewicz, S. Walters, Journal of Magnetism and Magnetic Materials 322 (21), 3377-3380 (2010).
• [21] H. Jiang, Y. Sun, J. Feng, J. Wang, Water Science and Technology 74 (5), 1116-1126 (2016).
• [22] Z. Lv, X. Liu, B. Jia, Sci Rep 6, 34213 (2016).
• [23] W. Feng, D. Nansheng, H. Helin, Chemosphere 41 (8), 1233-8 (2000).
• [24] B. Elias, L. Guihard, S. Nicolas, F. Fourcade, A. Amrane, Environmental Progress and Sustainable Energy 30 (2), 160-167 (2011).
• [25] S.K. Wu, Y. Pan, N. Wang, T. Lu, W.J. Dai, International Journal of Minerals, Metallurgy, and Materials 26 (1), 124-132 (2019).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).