PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Application of acoustic emission to monitoring the course of the alkali-silica reaction

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The study presented research on the possibility of using acoustic emission to detect and analyze the development of the alkali-silica reaction (ASR) in cement mortars. The experiment was conducted under laboratory conditions using mortars with reactive opal aggregate, accelerating the reaction by ensuring high humidity and temperature, in accordance with ASTM C227. The progress of corrosion processes was monitored continuously for 14 days. The tests were complemented with measurements of the expansion of the mortars and observations of microstructures under a scanning electron microscope. The high sensitivity of the acoustic emission method applied to material fracture caused by ASR enabled the detection of corrosion processes already on the first day of the test, much sooner than the first recorded changes in linear elongation of the specimens. Characteristic signal descriptors were analyzed to determine the progress of corrosion processes and indicate the source of the cracks. Analysis of recorded 13 AE parameters (counts total, counts to peak, duration, rise time, energy, signal strength, amplitude, RMS, ASL, relative energy, average frequency, initial frequency and reverberation frequency) indicates that the number of counts, signal strength and average frequency provide most information about the deleterious processes that occur in the reactive aggregate mortars. The values of RA (rise time/amplitude) and AF (average frequency) enabled the classification of detected signals as indicating tensile or shear cracks. The acoustic emission method was found suitable for monitoring the course of alkali-aggregate reaction effects.
Rocznik
Strony
169--178
Opis fizyczny
Bibliogr. 58 poz., rys., tab., wykr.
Twórcy
autor
  • Kielce University of Technology
  • Kielce University of Technology
Bibliografia
  • [1] PN-EN 206+A1:2016‒12 Concrete – Specification, performance, production and conformity.
  • [2] T. Ahmed, E. Burley, S. Rigden, and A.I. Abu-Tair, “The effect of alkali reactivity on the mechanical properties of concrete”, Constr. Build. Mat. 17, 123–144 (2003)
  • [3] Y. Zhou, H. Tian, L. Sui, F. Xing, and N. Han, “Strength Deterioration of Concrete in Sulfate Environment: An Experimental Study and Theoretical Modeling”, Adv. Mater. Sci. Eng. (2015).
  • [4] E. Mohseni, W. Tang, and H. Cui, “Chloride Diffusion and Acid Resistance of Concrete Containing Zeolite and Tuff as Partial Replacements of Cement and Sand”, Mater. 10, (2017).
  • [5] Alkali-Silica Reaction Mechanisms and Detection: An Advanced Understanding, Publication No. FHWA-HRT-14‒079, 2014.
  • [6] M.S. Islam and S.A. Akhtar, “Critical Assessment to the Performance of Alkali-Silica Reaction (ASR) in Concrete”, Can. Chem. Trans. 1(4), 253‒266 (2013).
  • [7] G.M. Ahlstrom, “The United States Federal Highway Administration's alkali–silica reactivity development and deployment program”, Proc. 14th International Conference on Alkali Aggregate Reactions, Austin, TX, 2012.
  • [8] M.D.A. Thomas, B. Fournier, and K.J. Folliard, “Report on determining the reactivity of concrete aggregates and selecting appropriate measures for preventing deleterious expansion in new concrete construction”, Publication No. FHWA-HIF-09‒001, 2008.
  • [9] Z. Owsiak, J. Zapała-Sławeta, and P. Czapik, “Sources of the Gravel Aggregate Reaction with Alkalis in Concrete”, Cem Lime Concr. 17 (3), 149‒153 (2012).
  • [10] J. Zapała-Sławeta and Z. Owsiak, “ The role of lithium compounds in mitigating alkali-aggregate reaction”, Constr. Build. Mater. 115, 299‒303 (2016).
  • [11] Z. Owsiak and J. Zapala-Slaweta, “The lithium nitrate effect on the concrete expansion caused by alkali-silica reaction in concrete of gravel aggregate”, Cem. Lime Concr. 20(1), 25‒31 (2015).
  • [12] Z. Owsiak and J. Zapała-Sławeta, “The course of the alkali-aggregate reaction in the presence of lithium nitrate”, Ceram – Silik. 57(2), 138‒145 (2013).
  • [13] Z. Owsiak, J. Zapała-Sławeta, and P. Czapik, “Diagnosis of concrete structures distress due to alkali-aggregate reaction”, Bull. Pol. Ac.: Tech. 63(1), 23‒29 (2015).
  • [14] A.B. Poole, “Introduction to alkali–aggregate reaction in concrete”, R.N. Swamy (Ed.), The Alkali Silica Reaction in Concrete, Van Nostrand Reinhold, New York, 1992.
  • [15] H. Wang and J.E. Gillot, “Mechanism of alkali–silica reaction and significance of calcium hydroxide”, Cem. Concr. Res. 21, 647‒654 (1991).
  • [16] F. Rajabipour, E. Giannini, C. Dunant, J.H. Ideker, and M.D.A. Thomas, “Alkali–silica reaction: Current understanding of the reactionmechanisms and the knowledge gaps”, Cem. Concr. Res. 76,130‒146 (2015).
  • [17] Z. Owsiak, The alkali-silica reaction in concrete. Pol. Cer. Bull.: Ceramics 72, CD-ROM (2002), [in Polish].
  • [18] J. Zapała-Sławeta and Z. Owsiak, “Influence of exposure conditions on the efficacy of lithium nitrate in mitigating alkali silica reaction”, IOP Conference Series-Materials Science and Engineering, p.245, 2017.
  • [19] J. Zapała-Sławeta and Z.Owsiak, “Effect of lithium nitrate on the reaction between opal aggregate and sodium and potassium hydroxides in concrete over a long period of time”, Bull. Pol. Ac.: Tech. 65(6), 773‒778 (2017).
  • [20] M. Sargolzahi, S.A. Kodjo, P. Rivard, and J. Rhazi, “Effectiveness of nondestructive testing for the evaluation of alkali–silica reaction in concrete” Constr. Build. Mater. 24, 1398–1403 (2010).
  • [21] P. Rivard and F. Saint-Pierre, “Assessing alkali-silica reaction damage to concrete with non-destructive methods: From the lab to the field”,. Constr. Build. Mater. 23, 902–909 (2009).
  • [22] C. Bernstone, H. Sundblom, P.O. Bjorkqvist, G. Gudmudsson, O. Klinghofer, I. Markey et al., “Non-destructive testing of concrete structure – an owner guide”, unpublished documents from the non-destructive testing for integrity determination of concrete structure, 2004.
  • [23] F. Saint-Pierre, “Monitoring of ASR evolution with ultrasonic method and seismic tomography”, (in French) Ph.D. Thesis, Department of Civil Engineering, Université de Sherbrooke, 2006.
  • [24] G. Świt, A. Krampikowska, and M.Ch. Luong, ”A prototype system for acoustic emission-based structural health monitoring of My Thuan bridge”, Proceedings of 2016 Prognostics and System Health Management Conference (PHM-Chengdu), 624‒630 (2016).
  • [25] P. Olaszek, J.R. Casas, and G. Swit, “On-site assessment of bridges supported by acoustic emission”, Proceedings of the Institution of Civil Engineers-Bridge Engineering, 169(2), 81‒92 (2016).
  • [26] G. Świt, “Acoustic Emission Method for Locating and Identifying Active Destructive Processes in Operating Facilities”, Appl. Sci. (Basel), (2018).
  • [27] Y. Kawasaki, T. Wakuda, T. Kobarai, and M. Ohtsu, “Corrosion mechanisms in reinforced concrete by acoustic emission”, Constr. Build. Mater. 48, 1240–1247 (2013).
  • [28] S. Patil, B. Karkare, and S. Goyal, “Acoustic emission vis-ŕ-vis electrochemical techniques for corrosion monitoring of reinforced concrete element”, Constr. Build. Mater. 68, 326–332 (2014).
  • [29] A. Zaki, H.K. Chai, D.G. Aggelis, and N. Alver, “Non-destructive evaluation for corrosion monitoring in concrete: A review and capability of acoustic emission technique”, Sensors, 15 (2015).
  • [30] Z. Ranachowski, “Acoustic emission in diagnostics of civil engineering structures”, Roads and Bridges, 2012.
  • [31] G. Świt and A. Krampikowska, “Influence of the number of acoustic emission descriptors on the accuracy of destructive process identification in concrete structures”, Proceedings of 2016 Prognostics and System Health Management Conference (PHM-Chengdu), 624‒630 (2016).
  • [32] ASTM E 650: Standard Guide for Mounting Piezoelectric Acoustic Emission Transducers, ASTM International, West Conshohocken, 2002.
  • [33] P. Olaszek, G. Swit, and J.R. Casas, “Proof load testing supported by acoustic emission. An example of application”, Proc. 5th International Conference on Bridge Maintenance, Safety and Management and Life-Cycle Organization (IABMAS), Philadelphia, 688‒694 (2010).
  • [34] G. Świt, “Evaluation of compliance changes in concrete beams reinforced by glass fiber reinforced plastics using acoustic emission” J. Mater. Civil Eng. 16(5), 414‒418 (2004).
  • [35] F. Weise, K. Voland, S. Pirskawetz, and D. Meinel, “Innovative measurement techniques for characterising internal damage processes in concrete due to ASR”, Proc. 14th International Conference on Alkali-Aggregate Reaction (ICAAR), Austin (Texas), 2012.
  • [36] M. Abdelrahman, M.K. ElBatanouny, P. Ziehl, J. Fasl, C.J. Larosche, and J. Fraczek, “Classification of alkali–silica reaction damage using acoustic emission: A proof-of-concept study”, Constr. Build. Mater. 95, 406–413 (2015).
  • [37] T. Lokajíček, R. Přikryl, S. Šachlová, and A. Kuchařová, “Acoustic emission monitoring of crack formation during alkali silica reactivity accelerated mortar bar test”, Eng. Geol. 220, 175–182 (2017).
  • [38] M. Pour-Ghaz, R. Spragg, J. Castro, and J. Weiss, “Can acoustic emission be used to detect alkali silica reaction earlier than length change tests?”, Proc. 14th International Conference on Alkali Aggregate Reaction in Concrete, Austin, TX, 2012.
  • [39] M. Bacharz, B. Goszczyńska, and W. Trąmpczyński, “Analysis of destructive processes in unloaded early age concrete with acoustic emission method”, Procedia Eng. 108, 245‒253 (2015).
  • [40] K. Ono, “Application of acoustic emission for structure diagnosis”, in Diagnostics Struct Heal Monit; 2(58), 3–18 (2011).
  • [41] M. Ohtsu, T. Isoda, and Y.Tomoda, “Acoustic emission techniques standardized for concrete structures”, J. Acoustic Emission, 25 (2007).
  • [42] JCMS-IIIB5706. Monitoring Method for Active Cracks in Concrete by Acoustic Emission; Federation of Construction Material Industries: Tokyo, Japan, pp. 23–28, 2003.
  • [43] J. Zapała-Sławeta and G. Świt, “Monitoring of the impact of lithium nitrate on the alkali-aggregate reaction using acoustic emission methods”, Materials, 12(1), 20(2019).
  • [44] J. Zapała-Sławeta, “The effect of meta-halloysite on alkali-aggregate reaction in concrete”, Mater. Struct. 50(5), 2017.
  • [45] ASTM C 227 – 10 Standard Test Method for Potential Alkali Reactivity of Cement- Aggregate Combinations (Mortar-Bar Method).
  • [46] L.Gołaski, B.Goszczyńska, G.Świt, and W.Trąmpczyński, “System for the global monitoring and evaluation of damage processes developing within concrete structures under service load”, Balt. J. Road Bridge Eng. 7(4), 237- 245 (2012).
  • [47] B. Goszczyńska, G. Świt, and W. Trąmpczyński, “Monitoring of Active Destructive Processes as a Diagnostic Tool for the Structure Technical State Evaluation”, Bull. Pol. Ac.: Tech. 61(1), 97‒108 (2013).
  • [48] L. Hasse, L. Spiralski, and J. Šikula, “Measurement and processing of acoustic emission signals in diagnostics of structures” The Scientific Papers of Faculty of Electrical and Control Engineering Gdańsk University of Technology, 20, 77‒84 (2004), [in Polish].
  • [49] P.J. Prem and A.R. Murthy, “Acoustic emission monitoring of reinforced concrete beams subjected to four-point-bending”, Appl. Acoust. 117, 28–38 (2017).
  • [50] W. Vélez, F. Matta, and P. Ziehl, “Acoustic emission intensity analysis of corrosion in prestressed concrete piles”, AIP Conference Proceedings, 1581, pp. 888, 2014.
  • [51] M. Benedetti, G. Loreto, F. Matta, and A. Nanni, “Acoustic emission monitoring of reinforced concrete under accelerated corrosion”, J. Mater. Civ. Eng. 25(8),1022–9 (2013).
  • [52] Y. Farnam, M.R. Geiker, D. Bentz, and J. Weiss, “Acoustic emission waveform characterization of crack origin and mode in fractured and ASR damaged concrete”, Cement Concrete Comp. 60, 135–145 (2015).
  • [53] K. Ohno and M. Ohtsu, “Crack classification in concrete based on acoustic emission”, Constr Build Mater. 24, 2339–46 (2010).
  • [54] S Chatterji, N Thaulow, and AD Jensen, “Studies of alkali–silica reaction. Part 5. Verification of a newly proposed reaction mechanism”, Cem Concr Res. 19, 177–83 (1989).
  • [55] S. Chatterji, N. Thaulow, and A.D. Jensen, Studies of alkali–silica reaction, part 6. Practical implications of a proposed reaction mechanism”, Cem Concr Res. 18, 363–6 (1989).
  • [56] M. Rashidi, M.C. Knapp, A. Hashemi, J-Y Kim, K. Donnell, R. Zoughi, L.J. Jacobs, and K.E. Kurtis, “Detecting alkali-silica reaction: A multi-physics approach”, Cement Concrete Comp. 73, 123‒135 (2016).
  • [57] K.L. Scrivener and P.J.M. Monteiro, “The alkali silica recation in monolithic opal”, J. Am. Ceram. Soc. 77 (11), 2849‒56 (1994).
  • [58] S.V. Liang, K.L. Scrivener, and P.L. Pratt, “An investigation of alkali-silica reaction in seven-year old and model concretes using S.E.M. end E.D.S”, Proc. 9th International Conference on Alkali-Aggregate Reaction, London 1992, pp.579‒586.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3688e1d9-25ed-4328-aecf-1ecbbedd2d79
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.