Analysis of the Magnetoelectric Sensor's Usability for the Energy Harvesting

• Autorzy: Kuczynski Karol , Bilski Adrian , Bilski Piotr , Szymanski Jerzy

Identyfikatory

DOI

10.24425/ijet.2020.135193

• Języki publikacji: EN

Abstrakty

EN

The paper presents the analysis of the magnetic sensor’s applicability to the energy harvesting operations. The general scheme and technical advancement of the energy extraction from the electric vehicle (such as a tram or a train) is presented. The proposed methodology of applying the magnetic sensor to the energy harvesting is provided. The experimental scheme for the sensor characteristics and measurement results is discussed. Conclusions and future prospects regarding the practical implementation of the energy harvesting system are provided.

Słowa kluczowe

EN

magnetoelectric sensor; current sensor; magnetostriction; amorphous metal ribbon; piezoelectric materials; energy harvesting

• Wydawca: Polish Academy of Sciences, Committee of Electronics and Telecommunication
• Czasopismo: International Journal of Electronics and Telecommunications
• Rocznik: 2020
• Tom: Vol. 66, No. 4
• Strony: 787--792
• Opis fizyczny: Bibliogr. 19 poz., fot., rys.

Twórcy

autor

Kuczynski Karol

• Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Transport, Electrical Engineering and Informatics

autor

Bilski Adrian

• University of Social Sciences in Lodz, Poland

autor

Bilski Piotr

• Warsaw University of Technology, Faculty of Electronics and Information Technology, Poland

autor

Szymanski Jerzy

• Kazimierz Pulaski University of Technology and Humanities in Radom, Faculty of Transport, Electrical Engineering and Informatics

Bibliografia

• [1] S. Priya (Ed.), D. J. Inman, “Energy harvesting technologies”, Springer Science+Business Media, LLC, 2009.
• [2] H. Palneedi, V. Annapureddy, S. Priya, J. Ryu, “Review: Status and perspectives of multiferroic magnetoelectric composite materials and applications”, Actuators, 5, 9, 2016, DOI:10.3390/act5010009.
• [3] J. Kaleta, ”Smart magnetic materials. Structure, manufacturing, testing properties, application”, Wrocław University of Technology Publishing House, Wroclaw 2013 (in Polish).
• [4] B. Pozo, J. I. Garate, J. Á. Araujo, S. Ferreiro, “Energy Harvesting Technologies and Equivalent Electronic Structural Models – Review”, Electronics, 8, 486, 2019, DOI:10.3390/electronics8050486.
• [5] F. Yang, L. Du, H. Yu, P. Huang, “Magnetic and Electric Energy Harvesting Technologies in Power Grids: A Review”, Sensors, 20, 1496, 2020, DOI:10.3390/s20051496.
• [6] F. Narita, M. Fox, “A Review on Piezoelectric, Magnetostrictive, and Magnetoelectric Materials and Device Technologies for Energy Harvesting Applications”, Advanced Engineering Materials, vol. 20, 2018, DOI:10.1002/adem.201700743.
• [7] Z.A. Ye, H. Kam, Tsu-Jae, K. Liu , “Negative stiffness structures for energy efficient MEM switches”, 2017 Fifth Berkeley Symposium on Energy Efficient Electronic Systems & Steep Transistors Workshop (E3S), 19-20 Oct. 2017, Berkeley, CA, USA, DOI: 10.1109/E3S.2017.8246196.
• [8] K. Kuczynski, G. Parzonko, “Possibilities of the energy recovery from the environment (energy harvesting) and other ways of powering electric vehicles”, “elektro.info”, 11, pp. 58-61, 2019, (in Polish).
• [9] C.M. Leung, S.W. Or, S. Zhang, S.L. Ho, “Ring-type electric current sensor based on ring-shaped magnetoelectric laminate of epoxy-bonded Tb0.3Dy0.7Fe1.92 short-fiber/NdFeB magnet magnetostrictive composite and Pb(Zr, Ti) O3 piezoelectric ceramic”, Journal of Applied Physics, 107, 09D918, 2010, DOI: 10.1063/1.3360349.
• [10] S. Tumański, “Measuring technique”, WNT , Warszawa 2007, (in Polish).
• [11] C. Lu, P. Li, Y. Wen, A. Yang, C. Yang, D. Wang, W., He, J. Zhang, “Magnetoelectric composite Metglas/PZT-based current sensor”, IEEE Transactions on Magnetics, 50, pp. 1–4, 2014, DOI: 10.1109/TMAG.2014.2326193.
• [12] S. Zhang, C. M. Leung, W. Kuang, S. W. Or, S. L. Ho, “Concurrent operational modes and enhanced current sensitivity in heterostructure of magnetoelectric ring and piezoelectric transformer”, Journal of Applied Physics, 113, 17C733, 2013, DOI: 10.1063/1.4801390.
• [13] X. Yu, G. Lou, H. Chen, C. Wen, S. Lu, “A slice-type magnetoelectric laminated current sensor”, IEEE Sensors Journal, 15, pp. 5839–5850, 2015, DOI: 10.1109/JSEN.2015.2451551.
• [14] S. Priya, R. Islam, S. Dong, D. Viehland, “Recent advancements in magnetoelectric particulate and laminate composites”, Journal of Electroceramics, 19, pp. 147–164, 2007, DOI: 10.1007/s10832-007-9042-5.
• [15] S. Tumanski, “Magnetic field sensors - the review”, Przeglad Elektrotechniczny, 2, pp. 74-80, 2004, (in Polish).
• [16] M. Bichurin, R. Petrov, V. Leontiev, G. Semenov, O. Sokolov, “Magnetoelectric Current Sensors”, Sensors, 2017, 17, 1271; DOI: 10.3390/s17061271.
• [17] K. Kuczynski, „Magnetic field sensor”, utility model, PL 067861 (in Polish), [Online]. Available: https://pl.espacenet.com/publicationDetails/biblio?FT=D&date=20141027&DB=pl.espacenet.com&locale=pl_PL&CC=PL&NR=121952U1&KC=U1&ND=5#.
• [18] A. Podgórni, “The importance of shielding in measurement of magnetic field”, Problems and progress in metrology PPM’18 – Conference Digest (in Polish).
• [19] K. Kuczynski „Possibilities of the application of hybrid magneto-piezoelectric junction as the magnetic field sensor”, Przeglad Elektrotechniczny, 4, pp. 69-71, 2010, (in Polish).