Mechanical Properties of Plug Welds after Micro-Jet Cooling

• Autorzy: Hadryś D.

Identyfikatory

DOI

10.1515/amm-2016-0286

• Języki publikacji: EN

Abstrakty

EN

New technology of micro-jet welding could be regarded as a new way to improve mechanical properties of plug welds. The main purpose of that paper was analyzing of mechanical properties of plug welds made by MIG welding method with micro-jet cooling. The main way for it was comparison of plug welds made by MIG welding method with micro-jet cooling and plug welds made by ordinary MIG welding method. It is interesting for steel because higher amount of acicular ferrite (AF) in weld metal deposit (WMD) is obtained in MIG welding method with micro-jet cooling in relation to ordinary MIG welding method. This article presents the influence of the cooling medium and the number of micro-jet streams on mechanical properties of the welded joint. Mechanical properties were described by force which is necessary to destroy weld joint.

Słowa kluczowe

EN

welding; micro-jet cooling; plug welds; plastic properties

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 4
• Strony: 1771--1776
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr.

Twórcy

autor

Hadryś D.

• University of Labour Safety Management 8 Bankowa Str., 40-007 Katowice, Poland

Bibliografia

• [1] Ł. Konieczny, R. Burdzik, B. Łazarz, Application of the vibration test in the evaluation of the technical condition of shock absorbers built into the vehicle, Journal of Vibroengineering 15, 4 (2013).
• [2] A. Lisiecki, Welding of titanium alloy by Disk laser. Proc. of SPIE Vol. 8703, Laser Technology 2012: Applications of Lasers, 87030T (January 22, 2013), DOI : 10.1117/12.2013431, (2012).
• [3] H. Hunger, R. Kaufmann, H. D. Wilde, Die Karoserie des neuen Audi A6, Der neue Audi A6, ATZ MTZ extra, Marz 2004.
• [4] D. Hadryś, Wpływ naprawy powypadkowej metodami spawalniczymi na bezpieczeństwo bierne pojazdów. Rozprawa doktorska, niepublikowana. Politechnika Śląska, Wydział Transportu, 2009.
• [5] G. Golański, J. Słania, Effect of different heat treatments on microstructure and mechanical properties of the martensitic GX12CrMoVNbN91 cast steel, Metallurgy and Materials 58, 1 (2013).
• [6] J. Słania, Influence of phase transformations in the temperature ranges of 1250-1000° C and 650-350° C on the ferrite content in austenitic welds made with T 23 12 LRM3 tubular electrode, Metallurgy and Materials 50, 3 (2005).
• [7] T. Węgrzyn, Nucleation of Acicular Ferrite At Oxide Inclusion Sites In Basic Electrode Steel Metal Weld Deposit, International Society of Offshore and Polar Engineers ISOPE´98, Montreal, Canada (1998).
• [8] D. Hadryś, Impact load of welds after micro-jet cooling. Archives of Metallurgy and Materials 60, 4 (2015).
• [9] D. Hadryś, J. Piwnik, W. Majewski, Plastic properties of welds after micro-jet cooling with different cooling gases. Advanced Materials Research 1036 (2014).
• [10] J. Pilarczyk, Poradnik inżyniera. Spawalnictwo 2, Wydawnictwa Naukowo-Techniczne, Warszawa 2005.
• [11] User manual WDW-100E.
• [12] PN-M-96006. Spawalnictwo - Próby technologiczne złączy blach zgrzewanych punktowo lub garbowo.