PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wykorzystanie komparatora próżniowego do przekazywania jednostki miary masy opartej na nowej definicji kilograma

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Dissemination of the SI mass unit from the National Prototype of Kilogram using the vacuum mass comparator after the mass unit redefinition
Języki publikacji
PL
Abstrakty
PL
W artykule omówiono jedną z metod przekazywania jednostki miary masy z wykorzystaniem komparatora próżniowego, po przeprowadzeniu zaplanowanej na rok 2018 redefinicji kilograma. Zatwierdzenie realizacji pierwotnej w oparciu o projekt Avogadro i projekt wykorzystujący wagę wata (Watt balance), pociągnie za sobą konieczność dopracowania spójnych metod przekazywania jednostki miary masy od państwowych wzorców materialnych do wzorców klas niższych oraz do urządzeń, których zasada działania jest powiązana z wyznaczaniem masy- wag lub maszyn wykorzystujących wzorce masy lub obciążniki. Mając na uwadze wzrost niepewności powiązany z redefinicją, nowe metody powinny charakteryzować się większą dokładnością niż metody stosowane obecnie. Właściwym wydaje się być kierunek obrany przez wiodące NMI’s w Europie, m.in. PTB oraz CMI, czyli wykonywanie pomiarów masy- przekazywania jednostki miary masy w próżni lub w atmosferze gazów innych niż powietrze.
EN
This article discussed one of the method for the mass dissemination from the national mass standard using the high vacuum mass comparator after the redefinition of the mass unit which was scheduled for 2018. The mass unit redefinition based on the Avogadro project and the Watt balance project requires to develop a new coherent methods for mass dissemination from the national prototypes to the usable and commercial reference mass standards. The new methods should guarantee higher accuracy then the methods which are currently applying. The right direction seems to be the one chosen by the leading NMI’s in Europe (like PTB & CMI) consisting in the mass unit dissemination in the vacuum and other gases than air conditions.
Rocznik
Strony
20--26
Opis fizyczny
Bibliogr. 12 poz., fot., rys., wykr.
Twórcy
  • Zakład Mechaniki, GUM
Bibliografia
  • [1] Davis R., The SI unit of mass. [w:] Metrologia 40 (2003) 299-305.
  • [2] Consultative Committee for Mass and Related Quantities (CCM): Report of the 12th meeting (26 March 2010) to the International Committee for Weights and Measures. Bureau International des Poids et Mesures, Sevres.
  • [3] Resolutions adopted by the General Conference on Weights and Measures (24th meeting), Paris, 17-21 October 2011.
  • [4] Stock M., Watt balance experiments for the determination of the Planck constant and the redefinition of the kilogram. [w:] Metrologia 50 (2013) R1.
  • [5] B. Andreas et al., Determination of the Avogadro Constant by Counting the Atoms in a Si28 Crystal. [w:] Phys. Rev. Lett. 106, 03080, 2011.
  • [6] Ossowski R. L., Przegląd aktualnej wiedzy na temat prowadzonych badań nad redefinicją jednostki masy- stan na koniec roku 2013. [w:] Metrologia i Probiernictwo 1-2 (2014) 25-29.
  • [7] Mohr P. J., Taylor B. N., Newell D. B., CODATA Recommended Values of the Fundamental Physical Constants: 2010. National Institute of Standards and Technology, Gaithersburg, Maryland 20899-8420, USA.
  • [8] OIML R 111-1/2 Edition 2004 (E).
  • [9] Marti K., Fuchs P., Russi S., Cleaning of mass standards: II. A comparison of new techniques applied to actual and potential new materials for mass standards, [w:] 2013 Metrologia 50 (2013) 83.
  • [10] Marti K., Fuchs P., Russi S., Cleaning of mass standards: a comparison of new and old techniques, Metrologia 49 (2012) 628.
  • [11] Richard P., CCM conclusions, 15th CCM meeting (February 2015).
  • [12] Consultative Committee for Mass and Related Quantities (CCM) Working Group on the Realization of the Kilogram (WGR-kg), Mise en pratique, v. 8.7 (2013).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-365c3392-6bed-4990-9a11-2bbd19972959
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.