The Effect of Selected Process Conditions on Microstructure Evolution of the Vacuum Brazed Joints of Hastelloy X Nickel Superalloy Sheets

• Autorzy: Krystek Kamil , Krzanowska Karolina , Wierzbińska Małgorzata , Motyka Maciej

Identyfikatory

DOI

10.24425/amm.2022.142375

• Języki publikacji: EN

Abstrakty

EN

High temperature vacuum brazing is a well-known and commonly used method for joining of nickel based elements and subassemblies of gas turbines, both for stationary and aviation applications. Despite the fact that currently used brazing filler metals meet stringent requirements of aviation and energetic industries, a lot of effort is spent on improving operational properties of the joints through modification of chemical composition or brazing process parameters. This paper aims for both of these aspects - its purpose is evaluation of the impact of filler metal composition, brazing gap width and process conditions on the microstructure of joints between sheet metal elements made of Hastelloy X nickel superalloy. Two different Ni-based filler materials (BNi-2 and Amdry 915) were investigated, based on the results of light and scanning electron microscopy evaluations, energy dispersive X-ray spectroscopy and hardness measurements.

Słowa kluczowe

EN

Ni-based superalloy; vacuum brazing; brazing filler metal; microstructure; SEM/EDS analysis

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 4
• Strony: 1551--1561
• Opis fizyczny: Bibliogr. 31 poz., fot., rys., tab., wykr.

Twórcy

autor

Krystek Kamil

• Rzeszow University of Technology, Department of Materials Science, 12 Powstańców Warszawy Av., 35-959 Rzeszów, Poland
• Pratt & Whitney Rzeszów S.A., 120 Hetmańska Str., 35-078 Rzeszów, Poland

• https://orcid.org/0000-0003-3908-1605

autor

Krzanowska Karolina

• Rzeszow University of Technology, Department of Materials Science, 12 Powstańców Warszawy Av., 35-959 Rzeszów, Poland

• https://orcid.org/0000-0003-2524-8478

autor

Wierzbińska Małgorzata

• Rzeszow University of Technology, Department of Materials Science, 12 Powstańców Warszawy Av., 35-959 Rzeszów, Poland

• https://orcid.org/0000-0002-2209-9449

autor

Motyka Maciej

• Rzeszow University of Technology, Department of Materials Science, 12 Powstańców Warszawy Av., 35-959 Rzeszów, Poland

• https://orcid.org/0000-0002-9127-2487

Bibliografia

• [1] C. Sponaugle, Pittsburgh Eng. 2 (4), 7-9 (2005).
• [2] J.R. Davis (Ed.), ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys, ASM International, Materials Park OH (2000).
• [3] K. Singh, Trans. Indian Inst. Met. 67 (5), 601-615 (2014). DOI: https://doi.org/10.1007/s12666-014-0398-3
• [4] http://haynesintl.com/docs/default-source/pdfs/new-alloy-brochures/high-temperature-alloys/brochures/x-brochure.pdf?sfvrsn=15b829d4_38, accessed: 15.10.2021.
• [5] R.H. Al-Nafeay, A.O. Al-Roubaiy, H. Omidvar, IOP Conf. Ser.: Mater. Sci. Eng. 1094, 012141 (2021). DOI: https://doi.org/10.1088/1757-899X/1094/1/012141
• [6] W. Miglietti, M. Du Toit, J. Eng. Gas Turbines Power 132 (8), 082102 (2010). DOI: https://doi.org/10.1115/1.3155397
• [7] K. Strzelczak, B. Lisiecka, Prod. Eng. Arch. 16, 12‐15 (2017). DOI: https://doi.org/10.30657/pea.2017.16.03
• [8] M.B. Henderson, D. Arrell, R. Larsson, M. Heobel, G. Marchant, Sci. Technol. Weld. Joi. 9 (1), 13-21 (2004). DOI: https://doi.org/10.1179/136217104225017099
• [9] Z. Mirski, J. Pabian, T. Wojdat, Arch. Metall. Mater. 66 (4), 1131-1140 (2021). DOI: 10.24425/amm.2021.136438
• [10] M. Singh, R. Asthana, N. Sobczak, J. Mater. Eng. Perform. 29, 4898-4912 (2020). DOI: https://doi.org/10.1007/s11665-020-04934-3
• [11] L. Zhang, J. Manuf. Process. 66, 651-668 (2021). DOI: https://doi.org/10.1016/j.jmapro.2021.04.015
• [12] M. Way, J. Willingham, R. Goodall, R. Int. Mater. Rev. 65 (5), 1-29 (2020). DOI: https://doi.org/10.1080/09506608.2019.1613311
• [13] D. Luo, Y. Xiao, L. Hardwick, R. Snell, M. Way, X. S. Morell, F. Livera, N. Ludford, C. Panwisawas, H. Dong, R. Goodall, Entropy 23 (1), 78 (2021). DOI: https://doi.org/10.3390/e23010078
• [14] M.M. Schwartz (Ed.), Brazing (2nd ed.), ASM International, Materials Park OH (2003).
• [15] A. Elrefaey, High-temperature brazing in aerospace engineering, in: M.C. Chaturvedi (Ed.), Welding and Joining of Aerospace Materials, Woodhead Publishing, Cambridge (2011). DOI: https://doi.org/10.1533/9780857095169.2.345
• [16] B. Ahn, Metals-Basel 11 (7), 1037 (2021). DOI: https://doi.org/10.3390/met11071037
• [17] A. Ghasemi, M. Pouranvari, Sci. Technol. Weld. Joi. 24 (4), 342-351 (2019). DOI: https://doi.org/10.1080/13621718.2018.1553280
• [18] M. Pouranvari, A. Ekrami, A.H. Kokabi, Weld. J. 93 (2), 60s-68s (2014).
• [19] L. Hardwick, P. Rodgers, E. Pickering, R. Goodall, Metall. Trans. A 52, 2534-2548 (2021). DOI: https://doi.org/10.1007/s11661-021-06246-0
• [20] A.A. Ivannikov, B.A. Kalin, O.N. Sevryukov, M.A. Penyaz, I.V. Fedotov, V.E. Misnikov, M.S. Tarasova, Sci. Technol. Weld. Joi. 23 (8), 187-197 (2017). DOI: https://doi.org/10.1080/13621718.2017.1361668
• [21] C. MacIsaac, C.A. Whitman, S.F. Corbin, J. Mater. Sci. 55, 8741-8755 (2020). DOI: https://doi.org/10.1007/s10853-020-04594-7
• [22] O.A. Ojo, N. Richards, M.C. Charturvedi, Sci. Technol. Weld. Joi. 9 (3), 209-220 (2004). DOI: https://doi.org/10.1179/136217104225012175
• [23] Z.S. Yu, R.F. Li, K. Shi, Appl. Mech. Mater. 236-237, 26-30 (2012). DOI: https://doi.org/10.4028/www.scientific.net/AMM.236-237.26
• [24] R.P. Rezende, M.D.M das Neves, Mater. Sci. Forum 1012, 354-359 (2020). DOI: https://doi.org/0.4028/www.scientific.net/MSF.1012.354
• [25] S.K. Tung, L.C. Lim, M.O. Lai, Scr. Mater. 34 (5), 763-769 (1996). DOI: https://doi.org/10.1016/1359-6462(95)00577-3
• [26] A. Ghasemi, M. Pouranvari. Sci. Technol. Weld. Joi. 24 (4), 1-10 (2018). DOI: https://doi.org/10.1080/13621718.2018.1553280
• [27] https://www.oerlikon.com/ecomaXL/files/metco/oerlikon_DSM0285.1_Amdry_915_Series.pdf, accessed: 15.10.2021.
• [28] https://princeizant.com/product/ams-4777, accessed: 15.10.2021.
• [29] J.-C. Zhao, M. Larsen, V. Ravikumar, Mater. Sci. Eng. A293 (1-2), 112-119 (2000). DOI: https://doi.org/10.1016/S0921-5093(00)01049-2
• [30] J. Xie, Y. Ma, M. Ou, W. Xing, L. Zhang, K. Liu, Materials 11 (10), 2065 (2018).
• [31] M.C. Chaturvedi, O.A. Ojo, N.L. Richards, Adv. Technol. Mater. Mater. Process. 6 (2), 206-213 (2004). DOI: https://doi.org/10.2240/azojomo0123.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).