PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modelowanie procesu cięcia elementów pojazdów samochodowych na nożycach krążkowych

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Modelling of the car elements shear slitting process
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono sposób modelowania procesu cięcia elementów pojazdów samochodowych na nożycach krążkowych z wykorzystaniem metody elementów skończonych. Symulację komputerową przeprowadzono dla przestrzennych stanów naprężeń i odkształceń z wykorzystaniem Solvera LS-DYNA oraz aplikacji LS-PrePost. Otrzymano mapy intensywności naprężeń i odkształceń dla dowolnej chwili czasowej z uwzględnieniem nieliniowości występujących w procesie. Przedstawiono wybrane wyniki analizy numerycznej, które mogą być wykorzystane do projektowania procesu i jego optymalizacji.
EN
The paper presents the modeling of the shear slitting process of the car elements using Finite Element Method. Numerical analysis was performed for the spatial states of stresses and strains in LS-DYNA solver and LS-PrePost application regarding process nonlinearities. Obtained maps of stresses, strains, displacement at any moment of time can be used for design of the process and it’s optimization.
Rocznik
Strony
43--47
Opis fizyczny
Bibliogr. 23 poz., il., pełen tekst na CD
Twórcy
autor
  • Politechnika Koszalińska
autor
  • Politechnika Koszalińska
Bibliografia
  • 1. Patyk R., Kukiełka L., Kukiełka K., Kułakowska A., Szczepanik K. 2011. Analiza ubytku właściwości użytkowych noży pielnika aktywnego. Inżynieria Rolnicza. Nr 5 (130), (2011), s. 223-229.
  • 2. Kukiełka L., Kułakowska A., Patyk R.: Numerical Modeling and Simulation of the Movable Contact Tool-Worpiece and Application in Technological Processes. Journal of Systemics, Cybernetics and Informatics, vol. 8, no 3, 2010, pp. 36-41, http://www.iiisci.org/journal/sci/FullText.asp? var=&id=GM211LP, ISSN: 1690-4524.
  • 3. Kukiełka L., Geleta K., Kukiełka K.: Modelling and Analysis of Nonlinear Physical Phenomena in the Burnishing Rolling Operation with Electrical Current. STEEL RESEARCH INTERNATIONAL - Metal Forming 2012, Publishing Company Wiley-VCH Verlag GmbH & Co. KGaA, pp. 1379-1382.
  • 4. Kukiełka L., Geleta K., Kukiełka K.: Modelling of Initial and Boundary Problems with Geometrical and Physical Nonlinearity and its Application in Burnishing Processes. STEEL RESEARCH INTERNATIONAL – Metal Forming 2012, Publishing Company Wiley-VCH Verlag GmbH & Co. KGaA, pp. 1375-1378.
  • 5. Kukiełka K.: Numerical simulations of deformation and stress in the cold rolled thread. Archiwum Technologii Maszyn i Automatyzacji, Vol. 31, Nr 1, Politechnika Poznańska, 2011, pp. 57-66, ISSN 1233-9709.
  • 6. Kukiełka K.: Modelling the external thread rolling process using finite element method. Archiwum Technologii Maszyn i Automatyzacji, Vol. 31, Nr 3, Politechnika Poznańska, 2011, pp. 49-58, ISSN 1233-9709.
  • 7. Chodór J, Kukiełka L.: Numerical analysis of chip formation during machining for different value of failure strain. PAMM 7 (1) s. 4030031-4030032, (2007).
  • 8. Chodór J, Kukiełka L.: Numerical analysis of micromachining of C45 steel by single abrasive grain. PAMM 8 (1) s. 10715-10716 (2008).
  • 9. Chodór J, Kukiełka L.: Using nonlinear contact mechanics in process of tool edge movement on deformable body to analysis of cutting and sliding burnishing processes. Applied Mechanics and Materials 474, s. 339-344, (2014).
  • 10. Kałduński P, Kukiełka L.: The numerical analysis of the influence of the blankholder force and the friction coefficient on the value of the drawing force. PAMM 7 (1) s. 4010045-4010046, (2007).
  • 11. Kałduński P, Kukiełka L.: The sensitivity analysis of the drawpiece response on the finite element shape parameter. PAMM 8 (1) s. 10725-10726, (2008).
  • 12. Hambli R.: Comparison between Lemaitre and Gurson damage models in crack growth simulation during blanking process. International Journal of Mechanical Sciences 43, pp. 2769–2790, (2001).
  • 13. Saanouni K, Belamri N, Autesserre P.: Finite element simulation of 3D sheet metal guillotining using advanced fully coupled elastoplastic-damage constitutive equations. Finite Elements in Analysis and Design 46, pp. 535-550, (2010).
  • 14. Wisselink H. Analysis of guillotining and slitting, finite element simulations. Ph.D - Thesis, University of Twente, The Netherlands, 2000.
  • 15. Bohdal Ł, Kukiełka L.: The effect of selected material parameters on the stress and strain states in the process of cutting a sheet plate with circular cutters. TASK Quarterly, vol. 10, no. 4, pp. 391-400, (2006).
  • 16. Bohdal Ł, Kukiełka L.: Modelowanie i analiza numeryczna procesu cięcia blach nożami krążkowymi z uwzględnieniem nieliniowości geometrycznej i fizycznej. Mechanik nr. 8-9, s. 712-716, (2011).
  • 17. Kułakowska A., Kukiełka L., Patyk R.: Numerical analysis andexperimental researches of burnishing rolling process of workpieces with real surface, The 5th International Symposium on Management, Engineering and Informatics: MEI 2009, The 13th Multi-conference on Systemics, Cybernetics and Informatics: WMSCI 2009, July 10th - 13th, 2009 Orlando, Florida, USA.
  • 18. Bohdal Ł, Kukiełka L.: Analiza numeryczna procesu cięcia blach karoseryjnych klinowym narzędziem niesymetrycznym. XII Słupskie Forum Motoryzacji, s. 29-34, (2009).
  • 19. Bohdal Ł, Kukiełka L.: Optimization of the dynamic blanking process. PAMM 7, s. 4030043-4030044, (2007).
  • 20. Kałduński P, Kukiełka L.: Numerical analysis and simulation of drawpiece forming process by finite element method. Applied Mechanics and Materials 474, s. 153-158, (2014).
  • 21. Bohdal Ł, Walczak P.: Eco-modeling of metal sheet cutting with disc shears, Annual Set The Environment Protection 15, pp. 863-872, (2013).
  • 22. Kosmol J, Mieszczak W.: Zastosowanie metody elementów skończonych do modelowania procesu wiercenia. Modelowanie Inżynierskie 37, s. 169-176, (2009).
  • 23. Schwer L. E.: Aluminum plate perforation: A comparative case study using Lagrange with erosion, multi-material ALE, and Smooth Particle Hydrodynamics. 7th European LS-DYNA Conference (2009).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-35fd985c-8d12-4fd0-a140-f915848c7169
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.