Effect of Silica Fume and Alumina Addition on the Mechanical and Microstructure of Fly Ash Geopolymer Concrete

• Autorzy: Min Fong Sue , Yong Heah Cheng , Ming Liew Yun , Al Bakri Abdullah Mohd Mustafa , Razi Hasniyati Md , Low Foo Wah , Ng Hui-Teng , Ng Yong-Sing

Identyfikatory

DOI

10.24425/amm.2022.137489

• Języki publikacji: EN

Abstrakty

EN

This paper discussed the effect of the addition of silica fume (2 wt.% and 4 wt.%) and alumina (2 wt.% and 4 wt.%) on the properties of fly ash geopolymer concrete. The fly ash geopolymer concrete achieved the highest 28-day compressive strength with 2 wt.% of silica fume (39 MPa) and 4 wt.% of alumina (41 MPa). The addition of 2 wt.% of silica fume increased the compressive strength by 105% with respect to the reference geopolymer (without additive). On the other hand, the compressive strength surged by 115% with 4 wt.% of alumina compared to the reference geopolymer. The addition of additives improved the compactness of the geopolymer matrix according to the morphology analysis.

Słowa kluczowe

EN

geopolymer; concrete; silica fume; alumina

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 1
• Strony: 197--202
• Opis fizyczny: Bibliogr. 24 poz., fot., rys., tab.

Twórcy

autor

Min Fong Sue

• Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia

autor

Yong Heah Cheng

• Centre of Excellence Geopolymer and Green Technology (CEGeoGTech), Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia
• Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP), 02600 Perlis, Malaysia

• https://orcid.org/0000-0001-7093-7833

autor

Ming Liew Yun

• Centre of Excellence Geopolymer and Green Technology (CeGeoGTech), Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia
• Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia

autor

Al Bakri Abdullah Mohd Mustafa

• Centre of Excellence Geopolymer and Green Technology (CEGeoGTech), Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia
• Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia

autor

Razi Hasniyati Md

• Reactor Technology Center, Technical Support Division, Malaysian Nuclear Agency, Bangi, 43000 Kajang, Malaysia

autor

Low Foo Wah

• Department of Electrical & Electronic Engineering, Lee Kong Chian Faculty of Engineering & Science, Universiti Tunku Abdul Rahman, Bandar Sungai Long, 43000 Kajang, Malaysia

autor

Ng Hui-Teng

• Centre of Excellence Geopolymer and Green Technology (CEGeoGTech), Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia
• Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP), 02600 Perlis, Malaysia

autor

Ng Yong-Sing

• Centre of Excellence Geopolymer and Green Technology (CEGeoGTech), Universiti Malaysia Perlis (UniMAP), 01000 Perlis, Malaysia
• Faculty of Mechanical Engineering Technology, Universiti Malaysia Perlis (UniMAP), 02600 Perlis, Malaysia

Bibliografia

• [1] E.A. Azimi, M.M.A.B. Abdullah, L.Y. Ming, H.C. Yong, K. Hussin, I.H. Aziz, Rev. Adv. Mater. Sci. 44, 273-285 (2016).
• [2] Z. Hu, M. Wyrzykowski, P. Lura, Cem. Concr. Res. 129, 105971 (2020). DOI: https://doi.org/10.1016/j.cemconres.2020.105971
• [3] C. Kuenzel, N. Ranjbar, Resour. Conserv. Recycl. 150, 104421 (2019). DOI: https://doi.org/10.1016/j.resconrec.2019.104421
• [4] K. Zulkifly, H.C. Yong, M.M.A.B. Abdullah, L.Y. Ming, D. Panias, K. Sakkas, in IOP Conference Series: Materials Science and Engineering 209, 012085 (2017). DOI: https://doi.org/10.1088/1757-899x/209/1/012085
• [5] Y. Liu, C. Shi, Z. Zhang, N. Li, D. Shi, Cem. Concr. Compos. 112, 103665 (2020). DOI: https://doi.org/10.1016/j.cemconcomp.2020.103665
• [6] F.N. Okoye, S. Prakash, N.B. Singh, J. Clean. Prod. 149, 1062-1067 (2017). DOI: https://doi.org/10.1016/j.jclepro.2017.02.176
• [7] A. Nmiri, M. Duc, N. Hamdi, O. Yazoghli-Marzouk, E. Srasra, Int. J. Miner. Metall. Mater. 26, 555-564 (2019). DOI: https://doi.org/10.1007/s12613-019-1764-2
• [8] H.M. Khater, Int. J. Adv. Struct. Eng. 5, 12 (2013). DOI: https://doi.org/10.1186/2008-6695-5-12
• [9] A.M.A. Blash, T.V.S. Lakshmi, Int. J. Sci. Res. 5, 319-323 (2016). https://www.ijsr.net/search_index_results_paperid.php?id=ART20162136
• [10] H.T. Kouamo, A. Elimbi, J. Mbey, C.J.N. Sabouang, D. Njopwouo, Construct. Build. Mater. 35, 960-969 (2012). DOI: https://doi.org/10.1016/j.conbuildmat.2012.04.023
• [11] Z. Zidi, M. Ltifi, Z.B. Ayadi, L.E. Mir, J. Asian Ceram. Soc. 7, 524-535 (2019). DOI: https://doi.org/10.1080/21870764.2019.1676498
• [12] T. Alomayri, J. Build. Eng. 25, 100788 (2019). DOI: https://doi.org/10.1016/j.jobe.2019.100788
• [13] O. Huey Li, L. Yun-Ming, H. Cheng-Yong, R. Bayuaji, M.M.A.B. Abdullah, F. Kai-Loong, T. Soo-Jin, N. Hui-Teng, M. Nabiałek, B. Jez, N. Yong-Sing, Magnetochemistry 7 (1), (2021). DOI: https://doi.org/10.3390/magnetochemistry7010009
• [14] Y. Huang, M. Han, J. Hazard. Mater. 193, 90-94 (2011). DOI: https://doi.org/10.1016/j.jhazmat.2011.07.029
• [15] R. Cioffi, L. Maffucci, L. Santoro, Resour. Conserv. Recycl. 40, 27-38 (2003). DOI: https://doi.org/10.1016/S0921-3449(03)00023-5
• [16] J. Davidovits, J. Therm. Anal. 37, 1633-1656 (1991). DOI: https://doi.org/10.1007/bf01912193
• [17] I. Garcia-Lodeiro, A. Palomo, A. Fernández-Jiménez, 2 - An overview of the chemistry of alkali-activated cement-based binders, in: F. Pacheco-Torgal, J.A. Labrincha, C. Leonelli (Eds), Handbook of Alkali-Activated Cements, Mortars and Concretes 2015, Woodhead Publishing (2015). DOI: https://doi.org/10.1533/9781782422884.1.19
• [18] P. Posi, C. Ridtirud, C. Ekvong, D. Chammanee, K. Janthowong, P. Chindaprasirt, Construct. Build. Mater. 94, 408-413 (2015). DOI: https://doi.org/10.1016/j.conbuildmat.2015.07.080
• [19] L. Kang-Wei, L. Kae-Long, C. Ta-Wui, C. Yu-Min, L. Ju-Ying, Construct. Build. Mater. 143, 455-463 (2017). DOI: https://doi.org/10.1016/j.conbuildmat.2017.03.152
• [20] J.K. Prusty, B. Pradhan, Construct. Build. Mater. 241, 118049 (2020). DOI: https://doi.org/10.1016/j.conbuildmat.2020.118049
• [21] G. Ishwarya, B. Singh, S. Deshwal, S.K. Bhattacharyya, Cem. Concr. Compos. 97, 226-238 (2019). DOI: https://doi.org/10.1016/j.cemconcomp.2018.12.007
• [22] B. Aissa, L. Long-yuan, A.B.A. Mohd Mustafa, B. Quoc-Bao, Construct. Build. Mater. 210, 198-209 (2019). DOI: https://doi.org/10.1016/j.conbuildmat.2019.03.202
• [23] I. Perná, M. Šupová, T. Hanzlíček, A. Špaldoňová, Construct. Build. Mater. 228, 116765 (2019). DOI: https://doi.org/10.1016/j.conbuildmat.2019.116765
• [24] A. Nikolov, H. Nugteren, I. Rostovsky, Construct. Build. Mater. 243, 118257 (2020). DOI: https://doi.org/10.1016/j.conbuildmat.2020.118257

Uwagi

1. The authors wish to gratefully acknowledge the facility support from Faculty of Mechanical Engineering Technology and Faculty of Chemical Engineering Technology, Universiti Malaysia Perlis, Malaysia.

2. Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).