Development and performance analysis of a novel multiphase doubly-fed induction generator

• Autorzy: Ryndzionek Roland , Blecharz Krzysztof , Kutt Filip , Michna Michał , Kostro Grzegorz

Identyfikatory

DOI

10.24425/aee.2022.142121

• Języki publikacji: EN

Abstrakty

EN

This paper presents the research into the design and performance analysis of a novel five-phase doubly-fed induction generator (DFIG). The designed DFIG is developed based on standard induction motor components and equipped with a five-phase rotor winding supplied from the five-phase inverter. This approach allows the machine to be both efficient and reliable due to the ability of the five-phase rotor winding to operate during single or dual-phase failure. The paper presents the newly designed DFIG validation and verification based on the finite element analysis (FEA) and laboratory tests.

Słowa kluczowe

EN

doubly-fed induction generator; induction generator; multiphase machine; wind power generation

• Wydawca: Polish Academy of Sciences, Committee on Electrical Engineering
• Czasopismo: Archives of Electrical Engineering
• Rocznik: 2022
• Tom: Vol. 71, nr 4
• Strony: 1003--1015
• Opis fizyczny: Bibliogr. 14 poz., rys. tab.

Twórcy

autor

Ryndzionek Roland

• Gdansk University of Technology, Faculty of Electrical and Control Engineering, Gabriela Narutowicza str. 11/12, 80-233 Gdansk, Poland

• https://orcid.org/0000-0002-6937-2318

autor

Blecharz Krzysztof

• Gdansk University of Technology, Faculty of Electrical and Control Engineering, Gabriela Narutowicza str. 11/12, 80-233 Gdansk, Poland

• https://orcid.org/0000-0002-5996-9110

autor

Kutt Filip

• Gdansk University of Technology, Faculty of Electrical and Control Engineering, Gabriela Narutowicza str. 11/12, 80-233 Gdansk, Poland

• https://orcid.org/0000-0001-7087-254X

autor

Michna Michał

• Gdansk University of Technology, Faculty of Electrical and Control Engineering, Gabriela Narutowicza str. 11/12, 80-233 Gdansk, Poland

• https://orcid.org/0000-0002-9683-7459

autor

Kostro Grzegorz

• Gdansk University of Technology, Faculty of Electrical and Control Engineering, Gabriela Narutowicza str. 11/12, 80-233 Gdansk, Poland

• https://orcid.org/0000-0002-8808-6552

Bibliografia

• [1] Patil N.S., Bhosle Y.N., A review on wind turbine generator topologies, International Conference on Power, Energy and Control (ICPEC), Dindigul, India, pp. 625–629 (2013), DOI: 10.1109/ICPEC.2013.6527733.
• [2] Zhang Y., Ula S., Comparison and evaluation of three main types of wind turbines, 2008 IEEE/PES Transmission and Distribution Conference and Exposition, Chicago, IL, USA, pp. 1–6 (2008), DOI: 10.1109/TDC.2008.4517282.
• [3] Beainy A., Maatouk C., Moubayed N., Kaddah F., Comparison of different types of generator for wind energy conversion system topologies, 3rd International Conference on Renewable Energies for Developing Countries (REDEC), Zouk Mosbeh, Lebanon, pp. 1–6 (2016), DOI: 10.1109/RE-DEC.2016.7577535.
• [4] Gupta R.A., Singh B., Jain B.B., Wind energy conversion system using PMSG, 2015 International Conference on Recent Developments in Control, Automation and Power Engineering (RDCAPE), Noida, India, pp. 199–203 (2015), DOI: 10.1109/RDCAPE.2015.7281395.
• [5] Su M., Dong H., Liu K., Zou W., Subsynchronous oscillation and its mitigation of VSC-MTDC with doubly-fed induction generator-based wind farm integration, Archives of Electrical Engineering, vol. 70, no. 1, pp. 53–72 (2021), DOI: 10.24425/aee.2021.136052.
• [6] McKenna R., Ostman P., Leye V.D., Fichtner W., Key challenges and prospects for large wind turbines, Renew. Sustain. Energy Rev., vol. 53, pp. 1212–1221 (2016), DOI: 10.1016/j.rser.2015.09.080.
• [7] Gertmar L., Liljestrand L., Lendenmann H., Wind Energy Powers-That-Be Successor Generation in Globalization, IEEE Trans. Energy Convers., vol. 22, no. 1, pp. 13–28 (2007), DOI: 10.1109/TEC.2006.889601.
• [8] Song Y., Wang X., Blaabjerg F., Doubly Fed Induction Generator System Resonance Active Damping Through Stator Virtual Impedance, IEEE Trans. Ind. Electron., vol. 64, no. 1, pp. 125–137 (2017), DOI: 10.1109/TIE.2016.2599141.
• [9] Morawiec M., Blecharz K., Lewicki A., Sensorless Rotor Position Estimation of Doubly Fed Induction Generator Based on Backstepping Technique, IEEE Trans. Ind. Electron., vol. 67, no. 7, pp. 5889–5899 (2020), DOI: 10.1109/TIE.2019.2955403.
• [10] Szypulski M., Iwański G., Synchronization of state-feedback-controlled doubly fed induction generator with the grid, Bull. Pol. Acad. Sci. Tech. Sci., vol. 66, no. 5 (2018), DOI: 10.24425/125334.
• [11] Maciejewski P., Iwański G., Six-phase doubly fed induction machine-based standalone DC voltage generator, Bull. Pol. Acad. Sci. Tech. Sci., vol. vol. 69, no. 1, p. 135839 (2021), DOI: 10.24425/BPASTS.2021.135839.
• [12] Gorginpour H., Oraee H., McMahon R.A., A Novel Modeling Approach for Design Studies of Brushless Doubly Fed Induction Generator Based on Magnetic Equivalent Circuit, IEEE Trans. Energy Convers., vol. 28, no. 4, pp. 902–912 (2013), DOI: 10.1109/TEC.2013.2278486.
• [13] Torkaman H., Keyhani A., A review of design consideration for Doubly Fed Induction Generator based wind energy system, Electr. Power Syst. Res., vol. 160, pp. 128–141 (2018), DOI: 10.1016/j.epsr.2018.02.012.
• [14] https://www.ansys.com/products/electronics/ansys-maxwell, accessed February 2022.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).