PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modelling of the human knee joint supported by active orthosis

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article discusses motion of a healthy knee joint in the sagittal plane and motion of an injured knee joint supported by an active orthosis. A kinematic scheme of a mechanism for the simulation of a knee joint motion is developed and motion of healthy and injured knee joints are modelled in Matlab. Angles between links, which simulate the femur and tibia are controlled by Simulink block of Model predictive control (MPC). The results of simulation have been compared with several samples of real motion of the human knee joint obtained from motion capture systems. On the basis of these analyses and also of the analysis of the forces in human lower limbs created at motion, an active smart orthosis is developed. The orthosis design was optimized to achieve an energy saving system with sufficient anatomy, necessary reliability, easy exploitation and low cost. With the orthosis it is possible to unload the knee joint, and also partially or fully compensate muscle forces required for the bending of the lower limb.
Rocznik
Strony
107--120
Opis fizyczny
Bibliogr. 44 poz., rys., wykr.
Twórcy
autor
  • Department of Mechatronics National Research University of Information Technology, Mechanics and Optics Saint-Petersburg, RUSSIA
autor
  • Department of Mechatronics National Research University of Information Technology, Mechanics and Optics Saint-Petersburg, RUSSIA
autor
  • School of Engineering, Tallinn University of Technology Ehitajate tee 5, 19086 Tallinn, ESTONIA
autor
  • School of Engineering, Tallinn University of Technology Ehitajate tee 5, 19086 Tallinn, ESTONIA
autor
  • School of Engineering, Tallinn University of Technology Ehitajate tee 5, 19086 Tallinn, ESTONIA
autor
  • School of Engineering, Tallinn University of Technology Ehitajate tee 5, 19086 Tallinn, ESTONIA
autor
  • School of Engineering, Tallinn University of Technology Ehitajate tee 5, 19086 Tallinn, ESTONIA
Bibliografia
  • [1] Saranli U., Arslan O., Ankarali M. and Morgul O. (2010): Approximate analytic solutions to nonsymmetric stance trajectories of the passive springloaded inverted pendulum with damping. - Nonlinear Dynamics, vol.62, No.4, pp.729-742.
  • [2] Kuo A. (2007): The six determinants of gait and the inverted pendulum analogy: A dynamic walking perspective. - Human Movement Science, vol.26, pp.617-656.
  • [3] Kajita S., Kanehiro F., Kaneko K., Yok K. and Hirukawa H. (2001): The 3D linear inverted pendulum model: A simple modeling for a biped walking pattern generation. - International Conference on Intelligent Robots and Systems, pp.239-246.
  • [4] Otani T., Hashimoto K., Yahara M., Miyamae S., Isomichi T., Hanawa S., Sakaguchi M., Kawakami Y., Lim H. and Takanishi A. (2015): Utilization of human-like pelvic rotation for running robot. - Frontiers in Robotics and AI, vol.2 (Article 17), pp.1-9.
  • [5] Pamies R. (2012): Application of Multibody Dynamics Techniques to the Analysis of Human Gait. - Ph.D. Dissertation, Polytechnic University of Catalonia.
  • [6] Lim H., Ogura Y. and Takanishi A. (2008): Locomotion pattern generation and mechanisms of a new bipedwalking machine. - Royal Society, Proceeding A, vol.464 (2089), pp.273-288.
  • [7] Chigarev A. and Borisov A. (2010): Simulation of controlled motion of the bipedal anthropomorphic mechanism. - Russian Journal of Biomechanics, PNIPU: 74-88.
  • [8] Zhang L., Brunnett G. and Rusdorf S. (2011): Real-time Human Motion Capture with Simple Marker Sets and Monocular Video. - Journal of Virtual Reality and Broadcasting, vol.8, No.1.
  • [9] Dodd K., Morris M., Matyas T., Wrigley T. and Goldie P. (1988): Lateral pelvic displacement during walking: retest reliability of a new method of measurement. - Gait & Posture, vol.7, No.3, pp.243-250.
  • [10] Galdeano D., Bonnet V., Bennehar M., Fraisse P. and Chemori A. (2012): Partial Human Data in Design of Human-Like Walking Control in Humanoid Robotics. - 10th IFAC Symposium on Robot Control, Syroco, Dubrovnik, Croatia.
  • [11] Ito T. (2009): Walking motion analysis using small acceleration sensors. - International Journal of Simulation: Systems, Science and Technology, vol.10, No.3, pp.65-71.
  • [12] Tanaka S., Motoi K., Nogawa M. and Yamakoshi K. (2004): A new portable device for ambulatory monitoring of human posture and walking velocity using miniature accelerometers and gyroscope.- 26th Annual International Conference of the IEEE, Engineering in Medicine and Biology Society, vol.1, pp.2283-2286.
  • [13] Cross R. (1999): Standing, walking, running, and jumping on a force plate. - American Journal of Physics, vol.67, No.4, pp.304-309.
  • [14] Marasovic T., Cecic M. and Zanchi V. (2009): Analysis and interpretation of ground reaction forces in normal gait. - WSEAS Transactions on Systems, vol.8, No.6, pp.1105-1114.
  • [15] Yorozu A., Moriguchi T. and Takahashi M. (2015): Improved leg tracking considering gait phase and spline-based interpolation during turning motion in walk tests. - Sensors, vol.15, No.9, pp.22451-22472.
  • [16] de Araújo V., Alsina P., Soares L. and de Medeiros A. (2012): Generation of Anthropomorphic movements for an active orthosis for lower limbs. - ABCM Symposium Series in Mechatronics, vol.5 (Section VII - Robotics), pp.1052-1057.
  • [17] Zhigailov S., Musalimov V. and Aryassov G. (2014): Design of experimental stand for human gait imitation. - Proceedings of the International Conference of DAAAM Baltic „Industrial Engineering“, pp.300-304.
  • [18] Zhigailov S., Kuznetcov A., Musalimov V. and Aryassov G. (2015): Measurement and analysis of human lower limbs movement parameters during walking. - Solid State Phenomena, vol.220-221, pp.538-543.
  • [19] Gayvoronskiy I.V. (2011): Anatomy and physiology: textbook for students. Institutions of prof. education. - Publishing Center "Academy", Moscow.
  • [20] Krokhaleva N. (2015): Modeling of the working surfaces geometry of the knee joint elements. - Closing Conference of the Project "Doctoral School of Energy and Geotechnology II", Tallinn University of Technology, pp.203-204.
  • [21] http://bodybuilding.k21vek.com/anatomy, May 2017.
  • [22] Farhat N., Mata V., Rosa D., Fayos J. and Peirau X. (2009): Musculo-skeletic Model for Knee Joint Forces Estimation in Sport Activities. - 7th Euromech Solid Mechanics Conference J. Ambrósio et al. (eds.) Lisbon, Portugal.
  • [23] Dewen J., Ruihong Z., Ho D., Rencheng W. and Jichuan Z. (2003): Kinematic and dynamic performance of prosthetic knee joint using six-bar mechanism. - Journal of Rehabilitation Research and Development, vol.40, No.1, pp.39-48.
  • [24] Blankevoort L., Kuiper J., Huiskes R. and Grootenboer H. (1991): Articular contact in a 3-dimensional model of the knee. - Journal of Biomechanics, vol.24, No.11, pp.1019-1031.
  • [25] Halloran J., Petrella A. and Rullkoetter P. (2004): Explicit finite element modeling of total knee replacement mechanics. - Journal of Biomechanics, vol.38, No.2, pp.323-331.
  • [26] Catana M. and Tarnita D. (2013): Modeling, simulation and optimization of a human knee orthotic device. - Applied Mechanics and Materials, vol.371, pp.549-553.
  • [27] Cyberdyne. http://www.cyberdyne.jp, May 2016.
  • [28] ReWalk. http://rewalk.com, May 2016.
  • [29] EksoBionics. http://intl.eksobionics.com, May 2016.
  • [30] Exoatlet. http://www.exoatlet.ru, May 2016.
  • [31] Sharkov O., Zolotov I. (2011): Influence of the geometric properties of an external housing on its stress-strain state. - Russian engineering research, vol.31, No.4, pp. 335 - 337.
  • [32] Weinberg B., Nikitczuk J., Patel S., Patritti B., Mavroidis C., Bonato P. and Canavan P. (2007): Design, control and human testing of an active knee rehabilitation orthotic device. - IEEE International Conference on Robotics and Automation, pp.4126-4133.
  • [33] Pratt P. and Krupp B. (2004): The robokne: an eksoskeleton for enhancing strength and endurance during walking. - IEEE International Conference on Robotics and Automation, pp.2430-2435.
  • [34] Unluhisarcikli O. and Mavroidis C. (2013): Lower Extremity Exoskeleton For Gait Retraining. - United States Patent Application Publication.
  • [35] Human height. https://en.wikipedia.org/wiki/Human_height, May 2016.
  • [36] Determine humans’ height by length of the long bones of the skeleton. http://www.forensmed.ru/tools/antr/height.php, May 2016.
  • [37] Ovchinnikov I. (2016): Human Gait Modeling Using MPC Controller. - MSc. Dissertation, Tallinn University of Technology, Tallinn, Estonia.
  • [38] Turchinovich N. (2016): Design of Knee Joint Support System. - MSc. Dissertation, Tallinn University of Technology, Tallinn, Estonia.
  • [39] Penkov I. and Aleksandrov D. (2011): Axial displacements in ball screw mechanisms with two and four contactpoint. - International Review of Mechanical Engineering, vol.5, No.7, pp.1213-1218.
  • [40] Krokhaleva N. (2016): Orthosis Supported Human Lower Limb Motion Model. - MSc. Dissertation, Tallinn University of Technology, Tallinn, Estonia.
  • [41] Vogel J., Castellini C. and van der Smagt P. (2011): EMG-Based Teleoperation and Manipulation with the DLR LWR-III. - IEEE/RSJ International Conference on Intelligent Robots and Systems. September 25-30, San Francisco, CA, USA.
  • [42] Wang J., Tang L. and Bronlund J. Surface EMG Signal Amplification and Filtering. - IEEE/RSJ International Journal of Computer Applications, 0975 - 8887.
  • [43] Stepp C., Dellon B. and Matsuoka Y. (2010): Contextual effects on robotic experiments of sensory feedback for object manipulation. - IEEE RAS & EMBS International conference on Biomedical Robotics and Biomechatronics, Tokyo, pp.58-63.
  • [44] Cavallaro E., Rosen J., Perry J., Burns S. and Hannaford B. (2005): Hillbased model as a myoprocessor for a neural controlled powered exoskeleton arm - parameters optimization. - IEEE International Conference on Robotics and Automation, Barcelona, Spain.
Uwagi
PL
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-35de2db4-6c1c-459d-90aa-ce8e86fabe1a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.