PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

New empirical correlations for the viscosity of selected organic phase change materials

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Although there are many methods and instruments for measuring viscosity, it is still difficult to determine a reliable value of the dynamic viscosity of complex chemicals such as paraffins and fatty acids. This is due to the complex and heterogeneous structure of these compounds in the case of commercial products. On the other hand, the measuring instrument should be selected very carefully, including its measuring principle and measuring range. This paper presents results of viscosity measurements of three organic PCMs (phase change materials) obtained in four different research institutions. Commercial products: paraffin, myristic acid (97%) and mixture of palmitic acid (55%) and stearic acid (45%) were selected as PCMs. Four different viscometers, namely Fungilab V-Pad, Rheotest LK 2.2, Rheometer Anton Paar MCR 102, and Brookfield DV-II + Pro have been used to determine temperature dependent dynamic viscosity of the tested PCMs. Using a large database of present measurement results, correlations were developed to calculate the dynamic viscosity of fatty acids and paraffins, which predict the experimental data within a band of ±20%.
Słowa kluczowe
Rocznik
Strony
123--139
Opis fizyczny
Bibliogr. 30 poz., rys.
Twórcy
  • Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland
  • Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland
  • Warsaw University of Technology, Nowowiejska 21/25, 00-665 Warsaw, Poland
  • Warsaw University of Technology, Nowowiejska 21/25, 00-665 Warsaw, Poland
  • Hochschule Bremen, JR Mayer-Institut für Energietechnik, Neustadswall 30, 28199 Bremen, Germany
  • Hochschule Bremen, JR Mayer-Institut für Energietechnik, Neustadswall 30, 28199 Bremen, Germany
  • Koszalin University of Technology, Racławicka 15-17, 75-620 Koszalin, Poland
  • Smart Fluid Inc., Rydygiera 8/20A, 01-793 Warsaw, Poland
Bibliografia
  • [1] Kenisarin M., Mahkamov K.: Passive thermal control in residential buildings using phase change materials. Renew. Sust. Energ. Rev. 55(2016), 371–398.
  • [2] Andrzejczyk R., Kowalczyk T., Kozak P., Muszyński T.: Experimental and theoretical study of a vertical tube in shell storage unit with biodegradable PCM for low temperature thermal energy storage applications. Appl. Therm. Eng. 183(2021),116216.
  • [3] Tan F.L., Tso C.P.: Cooling of mobile electronic devices using phase change materials. Appl. Therm. Eng. 24(2004), 159–169.
  • [4] Liu C., Xu D., Weng J., Zhou S., Li W., Wan Y., Jiang S., Zhou D., Wang J., Huang Q.: Phase change materials application in battery thermal management system: A Review. Materials 13(2020), 4622.
  • [5] Selvnes H., Allouche Y., Manescu R., Hafner A.: Review on cold thermal energy storage applied to refrigeration systems using phase change materials. Therm. Sci. Eng. Prog. 22(2021), 100807.
  • [6] Ying B.A., Kwok Y.L., Li Y., Zhu Q.Y., Yeung C.Y.: Assessing the performance of textiles incorporating phase change materials. Polym. Test. 23(2004), 541–549.
  • [7] Nuytten T., Moreno P., Vanhoudt D., Jespers L., Solé A., Cabeza L.F.: Comparative analysis of latent thermal energy storage tanks for micro-CHP systems. Appl. Therm. Eng. 59(2013), 542–549.
  • [8] Noureddini H., Teoh B.C., Clements L.D.: Viscosities of vegetable oils and fatty acids. J. Am. Oil Chem. Soc. 69(1992), 1189–1191.
  • [9] Valeri D., Meirelles A.J.A.: Viscosities of fatty acids, triglycerides, and their binary mixtures. J. Am. Oil Chem. Soc. 74(1997), 1221–1226.
  • [10] González F.O.C., González M.M.P., Gancedo J.C.B., Suárez R.A.: Estudio de la densidad y de la viscosidad de algunos ácidos grasos puros. Grasas y Aceites 50(1999),359–368.
  • [11] Rabelo J., Batista E., Cavaleri F.W., Meirelles A.J.A.: Viscosity prediction for fatty systems. J. Am. Oil Chem. Soc. 12(2000), 1255–1261.
  • [12] Ayranci E., Akgul G.: Apparent molar volumes and viscosities of lauric, palmitic, and stearic acids in 2-butanol at (20, 30, 40, and 60)◦C. J. Chem. Eng. Data 48(2003),56–60.
  • [13] Ferrer G., Barreneche C., Palacios A., Solé A., Fernández A.I., Cabeza L.F.: Empirical equations for viscosity and specific heat capacity determination of fatty acids. J. Energy Storage 10(2017), 20–27.
  • [14] Ferrer G., Gschwander S., Solé A., Barreneche C., Fernández A.I., Schossig P., Cabeza L.F.: Empirical equation to estimate viscosity of paraffin. J. Energy Storage11(2017), 154–161.
  • [15] Barreneche C., Ferrer G., Palacios A., Solé A., Fernández A.I., Cabeza L.F.: Empirical equations for viscosity and specific heat capacity determination of paraffin PCM and fatty acid PCM. IOP Conf. Ser.: Mater. Sci. Eng. 251(2017), 012114.
  • [16] Delgado M., Gschwander S., Lázaro A., Peñalosa C., Zalba B.: Determining the rheological behavior of octadecane as phase change material: First approach. Thermochim. Acta 548(2012), 81–87.
  • [17] Delgado M., Lázaro A., Biedenbach M., Gamisch S., Gschwander S., Höhlein S., König-Haagen A., Brüggemann D.: Intercomparative tests on viscosity measurements of phase change materials. Thermochim. Acta 668(2018), 159–168.
  • [18] Delgado M.: First conclusions of PCM viscosity measurements in the frame of Task 42-Annex 29-IEA. 1st PCM Rheometry Workshop, Freiburg, 7th March 2018.
  • [19] Kango S., Kalia S., Celli A., Njuguna J., Habibi Y., Kumar R.: Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites – A review. Prog. Polymer Sci. 38(2013), 1232–1261.
  • [20] Li T.X., Lee J.H., Wang R.Z., Kang Y.K.: Heat transfer characteristics of phase change nanocomposite materials for thermal energy storage application. Int. J. Heat Mass Transf. 75(2014), 1–11.
  • [21] Giro-Paloma J., Oncins G., Barreneche C., Martínez M., Fernández A.I., Cabeza L.F.: Physico-chemical and mechanical properties of microencapsulated phase change material. Appl. Energy 109(2013), 441–448.
  • [22] Dutkowski K., Fiuk J.J.: Experimental investigation of the effects of mass fraction and temperature on the viscosity of microencapsulated PCM slurry. Int. J. Heat Mass Transf. 126(2018), 390–399.
  • [23] Brown E., Jaeger H.M.: Shear thickening in concentrated suspensions: phenomenology, mechanisms and relations to jamming. Rep Prog Phys. 77(2014), 1–23.
  • [24] Głuszek M., Kubiś M., Zurowski R., Wiśniewski T., Szafran M.: Enhancement of thermo-rheological properties of smart materials based on SiO2 and PPG modificated with expanded graphite. J. Appl. Ceram. Technol. 15(2018), 538–545.
  • [25] Chan T. Y., Lin S. T.: Effects of stearic acid on the injection moulding of alumina. J. Am. Ceram. Soc. 78(1995), 2746–2752.
  • [26] Dakskobler A., Kosmač T.: Rheological properties of re-melted paraffin-wax suspensions used for LPIM. J. Eur. Ceram. 29(2009), 1831–1836.
  • [27] Moorthy M.B.K., Senthilvadivu K.: Effect of variable viscosity on free flow of nonNewtonian power-law fluids along a vertical surface with thermal stratification. Arch. Thermodyn. 33(2012), 4, 109–121.
  • [28] Cieśliński J.T., Krygier K., Smoleń S.: Measurement of temperature-dependent viscosity and thermal conductivity of alumina and titania thermal oil nanofluids. Arch. Thermodyn. 36(2015), 4, 35–47.
  • [29] Saeed F.R., Al-Dulaimi M.A.: Numerical investigation for convective heat transfer of nanofluid laminar flow inside a circular pipe by applying various models. Arch. Thermodyn. 42(2021), 1, 71–95.
  • [30] Zhang X., Liu X., Wang X., Band S.S., Bagherzadehd S.A., Taherifare S., Abdollahi A., Bahramid M., Karimipourd A., Chau K.W., Mosavi A.: Energetic thermophysical analysis of MLP-RBF feed-forward neural network compared with RLS Fuzzy to predict CuO/liquid paraffin mixture properties. Eng. Appl. Comput. Fluid Mech. 16(2022), 764–779.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-35d35824-d8f5-4a7b-858b-e57d27ce11b2
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.