The identification of degenerated systems in the impact energy dissipation process

• Autorzy: Bocian M. , Jamroziak K.
• Języki publikacji: EN

Abstrakty

EN

Purpose: The article presents an analysis of impact energy dissipation process with selected non-classical dynamic models. Design/methodology/approach: Identification of impact energy dissipation phenomena in mechanical systems with a layered structure (eg. composite ballistic shields) is quite a challenge, because on the one hand it is sought to the model, whose parameters are as much as possible responsible for the energy dissipation, on the other hand, the number of parameters should be optimized. Searched model should be reduced to a simple description of the whole phenomenon and completely imitate entire mechanical system. Description of the impact energy dissipation was modeled with selected degenerated systems in this case. Models were subjected to hammer extortion the specified impulse of force. The mathematical description of pulsed extortion was carried out by using the energy and balance equation of power. Verification of mathematical identification equations for selected model parameters was performed by computer simulation technique. Findings: This is original analytical method, which uses the degenerated systems in various configurations. It involves the use of specially derived identification equations, which are described by the decrease of potential energy of the system during the vibrations induced by a single impulse load. Research limitations/implications: Method of identification requires the use of appropriate input function. Input function could be a periodic type or a type of step function. Practical implications: Estimation of the energy consumption objects in terms of method of identifying the parameters of the model. Originality/value: Presented work includes the identification of piercing the ballistic shield, and it is a part of work on the implementation of the degenerated models to describe these phenomena.

Słowa kluczowe

EN

computational mechanics; impact load; degenerated model; equations energy and potency balance

PL

mechanika obliczeniowa; wpływ obciążenia; model zdegenerowany; równania mocy; równania energii

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2013
• Tom: Vol. 57, nr 1
• Strony: 23--30
• Opis fizyczny: Bibliogr. 30 poz., rys., tab.

Twórcy

autor

Bocian M.

• Institute of Materials Science and Applied Mechanics, Wroclaw University of Technology, ul. Smoluchowskiego 25, 50-370 Wrocław, Poland

autor

Jamroziak K.

• The Tadeusz Kosciuszko Military Academy of Land Forces, ul. Czajkowskiego 109, 51-150 Wrocław, Poland

Bibliografia

• [1] K. Arczewski, J. Pietrucha, J.T. Szuster, Vibration of physical systems, Publishing Office of Warsaw University of Technology, Warsaw, 2008 (in Polish).
• [2] A. Buchacz, Modeling, synthesis, modification, sensitivity and analysis of mechanic and mechatronic systems, Journal of Achievements in Materials and Manufacturing Engineering 24/1 (2007) 198-207.
• [3] A Buchacz, Calculation of flexibility of vibrating beam as the subsystem of mechatronic system by means the exact and approximate methods, Proceedings in Applied Mathematics and Mechanics 9/1 (2009) 373 - 374.
• [4] K. Jamroziak, The dry friction influence on dissipation of impact energy, Selected Engineering Problems 2 (2011) 139-144.
• [5] A. Wróbel, Kelvin Voigt’s model of single piezoelectric plate, Journal of Vibroengineering 14/2 (2012) 534-537.
• [6] K. Białas, Application of mechanical and electrical elements in reduction of vibration, Journal of Achievements in Materials and Manufacturing Engineering 52/1 (2012) 31-38.
• [7] A. Buchacz, Formulating of reverse task of chosen class of mechatronic systems, Journal of Achievements in Materials and Manufacturing Engineering 54/1 (2012) 75-82.
• [8] S. Zolkiewski, Dynamic flexibility of the supported-clamped beam in transportation, Journal of Vibroengineering 13/4 (2011) 810-816.
• [9] A. Baier, M. Majzner, Analysis of composite structural elements, Journal of Achievements in Materials and Manufacturing Engineering 43/2 (2010) 557-585.
• [10] A. Baier, M. Majzner, Modelling and testing of composite fiber, Design and Construction Engineering 9/39 (2010) 22-28.
• [11] M. Rojek, Methodology of diagnostic testing of polymeric matrix laminate composite materials, Open Access Library, 2, 2011, 1-148 (in Polish).
• [12] L.A. Dobrzański, A. Pusz, A.J. Nowak, Aramid-silicon laminatem materials with special properties - new perspective of its usage, Journal of Achievements in Materials and Manufacturing Engineering 28/1 (2008) 7-14.
• [13] P. Fedeliński, Computer modelling and analysis of microstructures with fibres and cracks, Journal of Achievements in Materials and Manufacturing Engineering 54/2 (2012) 242-249.
• [14] M. Grujicic, P.S. Glomski, T.He, G. Arakere, W.C. Bell, B.A. Cheeseman, Material modeling and ballistic-resistance analysis of armor-grade composites reinforced with high-performance fibers, Journal of Materials Engineering and Performance 18/9 (2009) 1169-1182.
• [15] C.C. Liang, C.Y. Jen, M.F. Yang, P.W. Wu, Resistant performance of performation in protective structures using a semi-empircal method with marine applications, Ocean Engineering 30 (2003) 1137-1162.
• [16] G. Wróbel, S. Pawlak, G. Muzia, Thermal diffusivity measurements of selected fiber reinforced polymer composites using heat pulse method, Archives of Materials Science and Engineering 48/1 (2011) 25-32.
• [17] K. Jamroziak, Analysis of a degenerated standard model in the piercing process, Journal of Achievements in Materials and Manufacturing Engineering 22/1 (2007) 49-52.
• [18] K. Jamroziak, Process description of piercing when using a degenerated model, Journal of Achievements in Materials and Manufacturing Engineering 26/1 (2008) 57-64.
• [19] K. Jamroziak, M. Bocian, Identification of composite materials at high speed deformation with the use of degenerated model, Journal of Achievements in Materials and Manufacturing Engineering 28/2 (2008) 171-174.
• [20] M. Kulisiewicz, M. Bocian, K. Jamroziak, Criteria of material selection for ballistic shields in the context of chosen degenerated models, Journal of Achievements in Materials and Manufacturing Engineering 31/2 (2008) 505-509.
• [21] P. Bourke, Ballistic impact on composite armour, Cranfield University, 2007.
• [22] D.E. Carlucci, S.S. Jacobson, Ballistic - theory and design of guns and ammunition, CRC Press, 2008.
• [23] M. Kulisiewicz, S. Piesiak, The methodology of modeling and identification of mechanical dynamical systems, University of Technology, Wrocław, 1994 (in Polish).
• [24] M. Kulisiewicz, Modelling and identification of nonlinear mechanical systems under dynamic complex loads, University of Technology, Wrocław, 2005 (in Polish).
• [25] K. Jamroziak, Identification of the selected parameters of the model in the process of ballistic impact, Journal of Achievements in Materials and Manufacturing Engineering 49/2 (2011) 305-312.
• [26] K. Jamroziak, B. Bocian, M. Kulisiewicz, Evaluation of a composite systems piercing with the use of degenerated models, High-Speed Tracked Vehicles 2 (2012) 41-50 (in Polish).
• [27] K. Jamroziak, Description of loss of the impact energy on the example of the selected degenerate systems, International Journal of Proceedings Machine Buildings and Systems 3 (2012) 140-143.
• [28] S. Piesiak, Identification of mechanical systems in domain nonlinear and degenerated dynamical models, University of Technology, Wrocław, 2003 (in Polish).
• [29] M. Bocian, M. Kulisiewicz, S. Piesiak, Computer studies of a degenerate system in terms of applications of energy balance and power for complex harmonic excitations, SYSTEMS - Journal of Transdisciplinary Systems Science, 9 (2004) 120-127.
• [30] M. Bocian, K. Jamroziak, M. Kulisiewicz, Determination of the chain-like non-linear multi-degree-of-freedom systems constant parameters under dynamical complex loads, Proceedings in Applied Mathematics and Mechanics 9/1 (2009) 397-398.