Influence of application of special casting compound on dynamic characteristics of the guideway system

• Autorzy: Powałka B. , Okulik T.
• Języki publikacji: EN

Abstrakty

EN

The work presents a new technology for the assembly of ball guideway systems which involves the use of a thin layer of special casting compound (EPY resin) used mainly for stable seating of machinery, especially on steel or concrete foundations. The paper presents results of simulation investigations. Simulation model was built using results of static tests. The results of simulation dynamic tests in the form of frequency response functions are shown. Experimentally supported simulation research presented in the work indicates that the use of EPY resin between the guide rail and the bed of the machine tool positively influences the dynamics of the system. The comparison of the new solution with the one used so far was performed on the basis of a guideway combination consisting of a body and a milling table. The dynamics was compared with the use of a frequency response function obtained using an impulse test. The proposed solutions are characterized by higher dynamic stiffness, which may directly influence the precision of the machined surfaces.

Słowa kluczowe

EN

EPY resin; dynamics; ball rail system; guideways

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2010
• Tom: Vol. 10, No. 2
• Strony: 71--81
• Opis fizyczny: Bibliogr. 10 poz., rys., wykr.

Twórcy

autor

Powałka B.

• West Pomerania Universitet of Technology, Szczecin, Poland

autor

Okulik T.

• West Pomerania Universitet of Technology, Szczecin, Poland

Bibliografia

• [1] BELL R., BURDEKIN M., 1969-70, A study of stick-slip motion of machine tool feed driver. Proc. Inst. Mech. Eng 184/30/543-560.
• [2] CHANG S. H., KIM P. J., LEE D. G., CHOI J. K., 2001, Steel-composite hybrid headstock for high-precision grinding machine. Composite Structures, 53/1-8.
• [3] GRUDZIŃSKI K., JAROSZEWICZ W., 2005, Founding machines and devices on fundamental washers cast from EPY resin. Szczecin, Zapol,.
• [4] KATO S., MATSUMOTO J., 2000, Recent developments in high precise NSK linear guides. Motion and Control, 9/27-32.
• [5] KIM D. I., JUNG S. C., LEE S. H., CHANG S. H., 2006, Parametric study on design of composite foam resin concrete sandwich structures of precision machine tool structures. Composite Structures, 75/408-414.
• [6] KIM H. S., JEONG K. S., LEE D. G., 1997, Design and manufacture of a three-axis ultra-precision CNC grinding machine. Journal of Materials Processing Technology 71/258-266.
• [7] MARUI E., ENDO H., HASHIMOTO M., KATO S., 1996, Some considerations of slideway friction characteristics by observing stick-slip vibration. Tribology International, 29/3/251-262.
• [8] MATSUMOTO J., 2004, Numerical analysis technology NSK linear guide for machine tools. Motion and Control, 16/29-37.
• [9] OKULIK T., POWAŁKA B., MARCHELEK K., 2009, The stiffness and damping parameters of the guideway rail mounted on the epoxy resin epy, Engineering modelling, Gliwice.
• [10] RAHMAN M., MANSUR M. A., LEE L. K., LUM J. K., 2001, Development of polymer impregnated concrete damping carriage for linear guideways for machine tools. International Journal of Machine Tools and Manufacturing, 41/431-441.