Specific Bending and Compressive Strenght of Poly(Vinyl Alcohol)-CNT Composites

• Autorzy: Zygoń P. , Nitkiewicz Z.

Identyfikatory

DOI

10.1515/amm-2016-0169

• Języki publikacji: EN

Abstrakty

EN

Carbon nanotubes are one of the strongest materials of unique mechanical, optical, electrical and electronic properties. Because of that they are mainly used as semiconductor materials constituting the reinforcing phase in composite materials. The paper presents properties of polymer composites reinforced with carbon nanotubes (CNT) containing various mixtures of dispersion. Produced composites featured various content carbon nanotubes: 20%, 30%, 40% i 50%. Macroscopic observations were carried out on ready to check composites, if pores exist in the structure and whether the reinforcement has been distributed in the entire volume. Bending and compressive strengths tests were performed and densities of individual composites were measured to determine the specific strength. Composite materials strengthened with carbon nanotubes feature a very low density and a very good mechanical strength, which makes them a good structural material.

Słowa kluczowe

EN

carbon nanotube; composites; mechanical strength; density

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 2B
• Strony: 993--996
• Opis fizyczny: Bibliogr. 11 poz., rys., wykr.

Twórcy

autor

Zygoń P.

• Czestochowa University of Technology, Institute of Materials Engineering, 19 Armii Krajowej Av., 42-200 Czestochowa, Poland

autor

Nitkiewicz Z.

• Czestochowa University of Technology, Institute of Materials Engineering, 19 Armii Krajowej Av., 42-200 Czestochowa, Poland

Bibliografia

• [1] D. R. Paul, L. M. Robeson, Polymer nanotechnology: Nanocomposites, Polymer 49, 3187-3204 (2008).
• [2] P. M. Ajayan, O. Stephan, C. Colliex, D. Trauth, Aligned carbon nanotube arrays formed by cutting a polymer resin-nanotube composite. Science 265,1212-4 (1994).
• [3] P. Zygoń, M. Gwoździk, J. Peszke, Z. Nitkiewicz, C. Kolan, Properties of polymer composites reinforced with carbon nanotubes. Hutnik - Wiadomości Hutnicze 5, 366-368 (2013).
• [4] S. Iijima, Carbon nanotubes: past, present, and future. Physica B 323, 3, 1-5 (2002).
• [5] P. Zygoń, M. Gwoździk, J. Peszke, Z. Nitkiewicz, Surface Topography of Carbon Nanotubes Forming Reinforcing Phase in Composite Materials. Composites Theory and Practice 12, 4, 262-265 (2012).
• [6] Z. Spitalsky, D. Tasis, K. Papagelis, C. Galiotis, Carbon nanotube- polymer composites: Chemistry, processing, mechanical and electrical properties. Progress in Polymer Science 35, 357-401 (2010).
• [7] W. Królikowski, Z. Rosłaniec, Nanokompozyty polimerowe. Composites Theory and Practice 4, 9, 3-16 (2004).
• [8] Zygoń P., Gwoździk M., Peszke J., Nitkiewicz Z., Comparison of properties of polymer composite materials reinforced with carbon nanoubes. Archives of Metallurgy and Materials 60, 1, 193-198 (2015).
• [9] P. Zygoń, M. Gwoździk, J. Peszke, Z. Nitkiewicz, A. Jakubas, Zmiana rezystywności powierzchniowej kompozytów polimerowych wzmacnianych nanorurkami węglowymi. Przegląd Elektrotechniczny 80, 12, 296-298 (2014).
• [10] N. G. Sahoo, S. Rana, J. W. Cho, L. Li, S. H. Chan, Polymer nanocomposites based on functionalized carbon nanotubes. Progress in Polymer Science 35, 837-867 (2010).
• [11] P. Zygoń, M. Gwoździk, C. Kolan, Z. Nitkiewicz, P. Gębara, Copper-based composites strengthened with carbon nanotubes, Composites Theory and Practice 13, 3, 198-202 (2013).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę