Dynamic splitting tensile performance of new and old concrete after high temperature treatment

• Autorzy: Cao Hai

Identyfikatory

DOI

10.24425/ace.2021.138487

• Języki publikacji: EN

Abstrakty

EN

In order to study the dynamic splitting tensile properties of new and old concrete after high temperature treatment, the effects of different impact velocities and temperatures on failure modes, dynamic splitting strength and energy absorption of new and old concrete were analyzed by impact dynamic splitting tensile test use of variable cross-section Φ 74 mm split Hopkinson pressure bar apparatus. The results show that: Impact velocity and temperature not only affect the dynamic splitting strength of new and old concrete bonding specimens, but also affect the failure modes and degree of breakage. The dynamic splitting strength of new and old concrete increases with the increase of impact velocity, but the increase rate decreased with the increase of temperature. The dynamic splitting strength first increases slowly and then decreases dramatically with the increase of temperature. In the dynamic splitting test of new and old concrete, the energy absorption increases with the increase of impact velocity and decreases with the increase of temperature.

Słowa kluczowe

EN

new concrete; old concrete; split Hopkinson pressure bar; SHPB; dynamic splitting tensile performance; impact velocity; temperature

PL

beton nowy; beton stary; SHPB; dzielony pręt Hopkinsona; prędkość uderzenia; temperatura

• Wydawca: Komitet Inżynierii Lądowej i Wodnej PAN ; Politechnika Warszawska, Wydział Inżynierii Lądowej
• Czasopismo: Archives of Civil Engineering
• Rocznik: 2021
• Tom: Vol. 67, nr 4
• Strony: 79--89
• Opis fizyczny: Bibliogr. 20 poz., il., tab.

Twórcy

autor

Cao Hai

• Huangshan University, School of Civil Engineering and Architecture, HuangShan, China

• https://orcid.org/0000-0002-5323-2660

Bibliografia

• [1] Z.Y. Bu, W.Y. Wu, “Inter shear transfer of unbounded prestressing precast segmental bridge column dry joints”, Engineering Structures, vol. 154, no. 1, pp. 52-65, 2018, DOI: 10.1016/j.engstruct.2017.10.048.
• [2] Zhi-fang Zhao et al., “Experimental study on adhesive tensile performance of young on old concrete”, Journal of Building Stucture, vol. 22, no.2, pp. 51-56, 2001.
• [3] Zhi-fang Zhao, Guo-fan Zhao, and Cheng-kui Huang, “Research on adhesive bending behavior of young on old concrete”, China Civil Engineering Journal, vol. 33, no. 2, pp. 67-72, 2000.
• [4] Li-na Jin et al., “Experimental study of shear performance of new-to-old concrete interface”, Journal of Experimental Menchanics, vol. 29, no. 5, pp. 611-619, 2014.
• [5] B.Wang et al., “Evaluation of tensile bonding strength between UHTCC repair materials and concrete substrate”, Construction and Building Materials, vol. 112, pp. 595-606, 2016, DOI: 10.1016/j.conbuildmat.2016.02.149.
• [6] A.M. Diab, A.E.M.A. Elmoaty, and M.R.T. Eldin, “Slant shear bond strength between self compacting concrete and old concrete”, Construction and Building Materials, vol. 130, pp. 73-82, 2016, DOI: 10.1016/j.conbuildmat.2016.11.023.
• [7] H.H. Hussein, “Interfacial properties of ultrahigh-performance concrete and high-strength concrete bridge connections”, Journal of Materials in Civil Engineering, vol. 28, no.5, pp. 1943-5533, 2016, DOI: 10.1061/(ASCE)MT.1943-5533.0001456.
• [8] A.T. Bassam et al., “Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay”, Construction and Building Materials, vol. 36, pp. 538-548, November 2012, DOI: 10.1016/j.conbuildmat.2012.06.013.
• [9] M.A. Carbonell Munoz, “Bond performance between ultrahigh-performance concrete and normal-strength concrete”, Journal of Materials in Civil Engineering, vol. 26, no. 8, pp. 1943-5533, 2014, DOI: 10.1061/(ASCE)MT.1943-5533.0000890.
• [10] Ju-hui Zhang and Yue Li, “Research summary on factors about influencing strength of interfacebetween new and old concrete”, Concrete, vol. 10, pp. 156-162, 2017.
• [11] Ma Qin-Yong, et al, “Experiment and analysis on adhesive bending performance of post pouring concrete on precast concrete”, Journal of Materials Science and Engineering, vol. 36, no. 1, pp. 47-50, 2018.
• [12] Jin-yu Xu et al, “Impact mechanical properties of concrete at and after exposure to high temperature”, Journal of Building Materials, vol. 16, no. 1, pp. 1-5, 2013.
• [13] Bao-jun Pang et al., “Experimental study on impact properties of reactive powder concrete using SHPB after exposure in high temperature”, Journal of Building Materials, vol. 15, no. 3, pp. 317-321, 2012, DOI: 10.3969/j.issn.1007-9629.2012.03.005.
• [14] Li-wen Wang et al, “Dynamic behavior for steel-fiber reinforced reactive powder concrete after exposure in high temperature”, Journal of Building Materials, vol. 13, no. 5, pp. 620-625, 2010.
• [15] Yu-tao Wang et al., “Static and dynamic mechanical properties of concrete after high temperature treatment”, Journal of vibration and shock, vol. 33, no. 20, pp. 16-19, 2014.
• [16] Yuan-ming He et al, “Impact tests on dynamic behavior of concrete at elevated temperatures”, Engineering mechanics, vol. 29, no. 9, pp. 200-208, 2012.
• [17] Zhi-fang Zhao, Yue-hai Yu, and Guo-fan Zhao, “Measurement method of the interfacial roughness of young on old concrete”, Building Structure, vol. 30, no. 1, pp. 26-29, 2000.
• [18] M. Pankow, C. Attard, and A.M. Waas, “Specimen size and shape effect in split hopkinson pressure bar testing”, The Journal of Strain Analysis for Engineering Design, vol. 44, no. 8, pp. 689-698, 2009.
• [19] Hai Cao, Qin-yong Ma, “Dynamic splitting tensile performance of post pouring concrete adhered on precast concrete”, Journal of Building Materials, vol. 21, no. 1, pp. 150-152, 2018.
• [20] Li-li Wang, “Foundation of stress waves”, 2nd ed, Beijing, National Defense Industry Press, pp. 5-64, 2010.