Behaviour of steel with the metastable austenite during segmental grinding

• Autorzy: Dąbrowski L. , Jeleńkowski J. , Marciniak M. , Szczęśniak D.

Identyfikatory

DOI

10.17814/atim.y2014.iss1(1).art10

• Języki publikacji: EN

Abstrakty

EN

The methods of the grinding process efficiency evaluation have been presented in this paper basing upon the temperature in the workpiece tool contact area. The technique of determining this temperature has also been given as a combination of analytical and experimental process. These are especially useful by properties and phase transformation investigations in the metastable austenite steels.

Słowa kluczowe

EN

segmental grinding; temperature registration; metastable austenite; deformation martensite; phase transformation

• Wydawca: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
• Czasopismo: Advanced Technologies in Mechanics
• Rocznik: 2014
• Tom: Vol. 1, no. 1 (1)
• Strony: 32--40
• Opis fizyczny: Bibliogr. 4 poz., rys., tab.

Twórcy

autor

Dąbrowski L.

• Warsaw University of Technology, Poland

autor

Jeleńkowski J.

• Warsaw University of Technology, Poland

autor

Marciniak M.

• Warsaw University of Technology, Poland

autor

Szczęśniak D.

• Warsaw University of Technology, Poland

Bibliografia

• [1] Brinkmeier E., Brockhoff T., Utilization of Grinding Heat as a New Treatment Process, Annals of the CIRP, 45/1, 1996.
• [2] Jeleńkowski J., Wpływ szybkości i temperatury odkształcania na temperaturę M_d, morfologie martenzytu i właściwości mechaniczne stali M26J2T3Nb, Archiwum Nauki o Materiałach, t. 16, No. 4, Warszawa, 1995.
• [3] Marciniak M., Dąbrowski L., Topography Generation by Nontraditional Surface Grinding, The Archive of Mechanical Engineering, ABM, Quarterly, vol. XLII (1995), No 3-4, Warsaw.
• [4] Yoshiro K., Mamoru I., Deformation work in abrasive cutting. Inst. J. Mach. Tool Des. and Res. vol.16, No 3, 1976.