Analysis of Selected Properties 100CrMnSi6-4 Surface Layer After Laser Micro-Smelting

• Autorzy: Napadłek W.

Identyfikatory

DOI

10.1515/amm-2017-0113

• Języki publikacji: EN

Abstrakty

EN

The use of laser ablation phenomenon with the “thermal effect” to produce surface textures, mainly lubricant micro-containers in the form of spherical micro-bowls in the surface layer of 100CrMnSi6-4 alloy of bearing steel. This is interesting research topic. The application the local (zonal) laser hardening of the steel surface layer on the surface of the bearing raceway or casts gives technological opportunities to deploy those technologies in the production process. The article presents the selected results of the own laboratory studies of hardness, microstructure and surface stereometry bearing steel 100CrMnSi6-4 in different states after volume hardening and low tempering, as well as those obtained as a result of laser surface texturing and laser pulsed hardening. The study results can be used to modify the surface layer of 100CrMnSi6-4 bearing steel and in the nearest future use ablative laser texturing of the rolling bearings treadmill surface in the production of lubricanting micro-containers, for improving the wear resistance tribological pair of roller – raceway in the friction conditions.

Słowa kluczowe

EN

technological surface layer; 100CrMnSi6-4 bearing steel; ablative laser texturing; laser hardening; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2A
• Strony: 757--762
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Napadłek W.

• Military University of Technology, Faculty of Mechanical, Poland

Bibliografia

• [1] T. Burakowski, W. Napadłek, J. Marczak, Ablative laser micromachining in areology, Inżynieria Materiałowa 5, 882-889 (2006).
• [2] http://www.wama.com.pl/pobierz/lozyskatoczne_calosc.pdf
• [3] B. Antoszewski, The surface layers of texture formation undled selected technologies and tribological properties. Kielce University of Technology, Kielce 2010.
• [4] http://www.skf.com/skf/productcatalogue/jsp/portal/printerFriendly.sp?maincatalogue=1&lang=pl&newlink=5_15_020300&lev.el=5&ptparent= 1_0/
• [5] S. Son, H. Lim, A.S. Kumar, M. Rahman, Influences of pulsed power condition on the machining properties in micro EDM, Journal of Materials Processing Technology 190, 73-76 (2007).
• [6] W. Napadłek, Investigation of the effect of laser hardening on selected properties of steel 40H. Military University of Technology Warsaw 2002.
• [7] S. Schreck, K.-H. Zum Gahr, Laser-assisted structuring of ceramic and steel surfaces for improving tribological properties. Germany Forschungszentrum Karlsruhe GmbH, Institute for Materials Research 2005.
• [8] G. Ryk, Y. Klingerman, I. Etsion, Experimental investigation of laser surface texturing for reciprocating automotive components, Tribology Transactions 45, 444-449 (2002).
• [9] W. Napadłek, An example of technology applications ablative laser micromachining in tribology, Tribologia 6, 81-89 (2009).
• [10] H.J. Hegge, J.Th.M. De Hosson, Microstructure of laser treated Al alloys, Acta metal. Mater. 38 (12), 2471-2477 (1990).
• [11] M.H. Cho, S.J. Kim, R.H. Basch, J.W. Fash, H. Jang, Tribological study of gray cast iron with automotive brake linings: The effect of rotor microstructure, Tribology International 36, 537-545 (2003).
• [12] W. Napadłek, Laser ablation surface layer texturing of selected Fe-C alloy. Journal of Achievements of Materials and Manufacturing Engineering 55 (2), 748-751 (2012).
• [13] M.A. Maleque, S. Dyuti, M.M. Rahmann (member IAENG), Material selection method in design of Automotive brake disc, Proceedings Of The World Congress Of Engineering, London 2010.
• [14] P. Kosbe, C. More, Performance of a disc brake friction material, Frontiers in Automobile and Techanical Engineering (FAM) 25–27, 383-386 (2010).
• [15] Ch. Zhi-kai, L. Shu-Chao, S. Xi-bin, Z. Haifeng, Y. Wan-Shi, Z. Hong, Effects of bionic units on the fatigue wear of ray cast iron surface with different shapes and distributions, Optics&Laser Technology 66, 166-174 (2015).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).