Microstructural Characterization of Ni-Based B₄C Reinforced Composite Coating Produced by Tungsten Inert Gas Method

• Autorzy: Kılıç Musa

Identyfikatory

DOI

10.24425/amm.2021.136398

• Języki publikacji: EN

Abstrakty

EN

In this study, NiCrBSi-B₄C (wt. %5, %10 ve %15 B₄C) powder mixtures are coated on the stainless steel surface of AISI304 by tungsten inert gas (TIG) method. We use optic microscope and scanning electron microscope (SEM) for the coating layer analysis, energy dispersive spectrometry (EDS) for element distribution analysis and X-ray diffractogram (XRD) for the analysis of phase components. The measurements of hardness are determined by the microhardness tester. Based on the results obtained by the examination of microstructure and phases, it has been observed that while B and C elemets are more intense in the middle and upper parts of the coating layer, the parts close to the interface have a higher intensity of Ni and Fe. Moreover, there are phases such as Cr₇C₃, γ – Ni, CrFeB, Ni₃B, CrB ve Fe₂B are formed in the coating layer. The increasing ratio of B₄C results in increasing on the measurement values of microhardness. The maximum hardness value (430,8 HV_0.2) is obtained from the coating layer of S4 sample while the minimum value (366,9 HV_0.2) is observed from the NiCrBSi coated sample

Słowa kluczowe

EN

coating; NiCrBSi-B4C; Cr7C3; microstructure; microhardness

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2021
• Tom: Vol. 66, iss. 3
• Strony: 917--924
• Opis fizyczny: Bibliogr. 29 poz., fot., rys., tab., wykr.

Twórcy

autor

Kılıç Musa

• Batman University, Faculty of Technology, Department of Manufacturing Engineering, Batman, Turkey

• https://orcid.org/0000-0001-5808-6917

Bibliografia

• [1] R. Rachidi, B. El Kihel, F. Delaunois, Mater. Sci. Eng. B-Adv. 241, 13-21 (2019).
• [2] H. Zhao, J. Li, Z. Zheng, A. Wang, D. Zeng, Y. Miao, Surf. Coat. Tech. 286, 303-312 (2016).
• [3] C.K. Sahoo, M. Masanta, J. Mater Process Tech. 240, 126-137 (2017).
• [4] Q. An, L. Huang, s. Jiang, X. Li, Y. Gao, Y. Liu, L. Geng, Vacuum. 145, 312-319 (2017).
• [5] J.-S. Meng, G. Jin, X.-P. Shi, Appl. Surf. Sci. 431, 135-142 (2018).
• [6] S. Buytoz, M. Ulutan, M.M. Yildirim, Appl. Surf. Sci. 252, 1313-1323 (2005).
• [7] J. Yin, D. Wang, L. Meng, L. Ke, Q. Hu, X. Zeng, Surf. Coat. Tech. 325, 120-126 (2017).
• [8] J. Rodriguez, A. Martı́n, R. Fernández, J.E. Fernández, Wear. 255, 950-955 (2003).
• [9] N.L. Parthasarathi, M. Duraiselvam, J. Alloy Compd. 505, 824-831 (2010).
• [10] S. Abdi, S. Lebaili, Phys. Procedia. 2, 1005-1014 (2009).
• [11] M.J. Tobar, C. Álvarez, J.M. Amado, G. Rodríguez, A. Yáñez, Surf. Coat. Tech. 200, 6313-6317 (2006).
• [12] N.Y. Sari, M. Yilmaz, Surf. Coat. Tech. 202, 3136-3141 (2008).
• [13] E. Fernández, M. Cadenas, R. González, C. Navas, R. Fernández, J. de Damborenea, Wear 259, 870-875 (2005).
• [14] S. Buytoz, Gu J. Sci., Part C. 8, 51-63 (2020).
• [15] X.-N. Wang, X.-M. Chen, Q. Sun, H.-S. Di, Mater. Lett. 206, 143-145 (2017).
• [16] K.A. Habib, D.L. Cano, José Antonio Heredia, J.S. Mira, Surf. Coat. Tech. 358, 824-832 (2019).
• [17] L.-Y. Chen, T. Xu, H. Wang, P. Sang, L.-C. Zhang, Surf Coat Tech. 358, 467-480(2019).
• [18] Q.W. Meng, T.L. Geng, B.Y. Zhang, Surf. Coat. Tech. 200, 4923-4928 (2006).
• [19] Y.-X. Zhou, J. Zhang, Z.-G. Xing, H.-D.Wang, Z.-L. Lv, Surf. Coat. Tech. 361, 270-279 (2019).
• [20] M. Kilic, A. Imak, I Kirik, JMEPEG. 30, 1411-1419 (2021).
• [21] K. Kılıçay, S. Buytoz, M. Ulutan, Surf. Coat. Tech. 397, 125974 (2020).
• [22] M.-J.Chao, X. Niu, B. Yuan, E.-J. Liang, D.-S. Wang, Surf. Coat. Tech. 201, 1102-1108 (2006).
• [23] Y. Z., T. Yu, L. Chen, Y. Chen, C. Guan, J. Sun, Ceram. Int. 46, 25136-25148 (2020).
• [24] L. Guo-lu, L. Ya-long, D. Tian-shun, F. Bin-Guo, Wang Hai-dou, Zheng Xiao-dong, Zhou Xiu-kai, Vacuum. 156, 440-448 (2018).
• [25] S. Buytoz, M. Ulutan, M.M. Yıldırım, Eng. & Arch. Fac. Osmangazi University XVIII, 93-107 ( 2005).
• [26] M. Kilic, European Journal of Technique (EJT) 10, 106-118 (2020).
• [27] Guo-lu Li, Ya-long Li, Tian-shun Dong, Hai-dou Wang, Xiao-dong Zheng, Xiu-kai Zhou, Hindawi Advances in Materials Science and Engineering 2018, Article ID 8979678, 1-10 (2018).
• [28] M. Storozhenko, O. Umanskyi, V. Krasovskyy, M. Antonov, O. Terentjev, J. Alloy Compd. 778, 15-22 (2019).
• [29] A. Zabihi, R. Soltani, Surf. Coat. Tech. 349, 707-718 (2018).

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).