A study on spinning limits and yarn properties with progressive change in yarn count in friction spinning

• Autorzy: Chattopadhyay R. , Sinha S. K.
• Języki publikacji: EN

Abstrakty

EN

The spinning limit for three different fibres (cotton, viscose rayon and polyester) on a Dref-3 friction spinning machine has been investigated. The change in yarn properties with progressive change in count has also been reported. The count range has been seen to be dependent on fibre type. As one progresses from very coarse to fine counts, the yarn tensile property remain fairly unaltered for cotton, but changes for polyester and viscose yarns.

Słowa kluczowe

EN

spinning limit; DREF; friction spinning; yarn property; twist

PL

limity przędzenia; DREF; właściwości przędzy; skręcanie

• Wydawca: Lodz University of Technology, Faculty of Material Technologies and Textile Design
• Czasopismo: Autex Research Journal
• Rocznik: 2007
• Tom: Vol. 7, no. 1
• Strony: 1--8
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Chattopadhyay R.

• Department of Textile Technology, Indian Institute of Technology, Delhi, India

autor

Sinha S. K.

• Department of Textile Technology, National Institute of Technology, Jalandhar, India

Bibliografia

• 1. Aydogmus Y and Behry H M, Spinning limits of friction spinning system (DREF-III), Textile Res. J, 69(12), 925-930 (1999).
• 2. Burley. S.T. Jr, A method of determining the effects of various ginning treatments on the spinnability of cotton, Textile Res. J, 29,696-699 (1959).
• 3. Graham J S and Taylor R A, Development of a method to measure cotton spinnability, Textile Res. J, 48(5), 286-292 (1978).
• 4. Krifa M and Ethridge M.D., A quantitative approach to estimating cotton spinnability limits, Textile Res. J, 74(7), 611-616, (2004).
• 5. Lawrence C.A., Fundamentals of spun yarn technology, CRC Press, 1st edition, 2003.
• 6. Pyncklels F, Kiekens P, Sette S, Van Langenhove L and Impe K, Use of Neural Nets for determining the spinnability of fibres, J. Text. Inst, 86(3), 425-437 (1995).
• 7. Ruby E.S. and Parsons L.E., Repeatability and tolerances of laboratory spinning techniques, Textile Res. J, 19 (5), 283-287, (1949).
• 8. Salhotra K.R. and Chattopadhyay R., Loss in fibre tenacity during separation in rotor spinning, Textile Res. J, 54,194-197, (1984).
• 9. Salhotra K.R. and Chattopadhyay R., Surface damage to fibres during opening in a rotor frame, Ind. J Text. Res, vol 10, 193-194 (1985).
• 10. Taylor R.A. and Graham J.S., The influence of front roll coverings on the spinning strength of cotton, Textile Res. J, 49(12), 717-723 (1979).
• 11. The Dref-2 friction spinning system: Brochure for Dref-2 Friction spinning machine, Textilmaschinenfabrik, Dr. Ernst Fehrer A G.
• 12. The Dref-3 friction spinning system: Brochure for Dref-3 Friction spinning machine, Textilmaschinenfabrik, Dr. Ernst Fehrer A G.
• 13. Zhu R and Ethridge M.D., A method for estimating the spinning potential yarn number for cotton spun on the rotor spinning system, J. Text. Inst, 89(2), 274-280 (1998).