Mechatronic approach to the development of an intelligent fixturing device test-bed

• Autorzy: Bukowski A. , Kwasny W. , Jedrzejewski J.
• Języki publikacji: EN

Abstrakty

EN

In order to improve the process of designing mechatronic devices, an approach, based on a mechatronic model, is proposed. The structure of such model is presented, consisting of partial models of single elements in a system. Methods of creating these models and integrating them into one mechatronic model are discussed. In order to illustrate the approach, a case study is shown, consisting of a mechatronic alignment and fixing device for high-precision machine tools. A test bed of such device is under construction, which will allow experimental verifying partial models of components, as well as the entire system's mechatronic model. An extended set of monitoring sensors will provide accurate system behaviour data useful for such process.

Słowa kluczowe

EN

mechatronic approach; active fixturing system; intelligent controller

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2008
• Tom: Vol. 8, No. 3
• Strony: 66--76
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Bukowski A.

• Wrocław University of Technology, Institute of Production Engineering and Automation, ul. Łukasiewicza 5,50-371, Wrocław, Poland

autor

Kwasny W.

• Wrocław University of Technology, Institute of Production Engineering and Automation, ul. Łukasiewicza 5,50-371, Wrocław, Poland

autor

Jedrzejewski J.

• Wrocław University of Technology, Institute of Production Engineering and Automation, ul. Łukasiewicza 5,50-371, Wrocław, Poland

Bibliografia

• [1] GAWRYSIAK, M., Mechatronika i Projektowanie Mechatroniczne. Politechnika Białostocka, Białystok (Poland), 1997.
• [2] GROCHOWSKI, M., JĘDRZEJEWSKI, J., Comparison of Two FEA-based Approaches in Prediction of Workpiece-Fixture Static Behaviour, Journal of Machine Engineering, Vol. 8, No. 3, 2008.
• [3] BAKKER, O. J., POPOV, A., RATCHEV, S., Control of a Workpiece Holder with Piezoelectric Mechanical Actuation, Journal of Machine Engineering, Vol. 8, No. 3, 2008.
• [4] LEOPOLD, J., CLAUSS, D., KLAERNER, M., POPPLITZ, A., Investigations to New Fixturing Principles for Aerospace Structures, International Conference on Applied Production Technology, Bremen, September 17-19, 2007.
• [5] BUKOWSKI, A., GROCHOWSKI, M., JEDRZEJEWSKI, J., Hybrid Modelling of Machine Tool Body with Cooling Component, Journal of Machine Engineering, Vol. 8, No. 1, 2008.
• [6] BALMES, E., BIANCHI, J-P., LECLERE, J-M., Structural Dynamics Toolbox - FEMLink, User's Guide Version 6.1, August, 2008.
• [7] LENNON, T., Model-Based Design for Mechatronics, Retrieved 18.10.2008 from Mechatronics Zone: http://www.mechatronicszone.com/fundamentals/all_articles.php?art_id=736.