Workshop programming as a part of technological preparation of production

• Autorzy: Dodok T. , Čuboňová N. , Kuric I.

Identyfikatory

DOI

10.12913/22998624/66504

• Języki publikacji: EN

Abstrakty

EN

The article deals with the application of workshop programing system - Sinumerik Operate 840D SL in technological preparation of production. Application of the system in real situation pointed out on several problems and disadvantages of the system. The article contains a comparison of the effectiveness between workshop programming, ISO programming, and CAM system programming. Sinumerik Operate was used as a control system at a milling machine EMCO Concept Mill 105.

Słowa kluczowe

EN

Sinumerik Operate 840D SL; workshop programing; EMCO machine tool

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2017
• Tom: Vol. 11, no 1
• Strony: 111--116
• Opis fizyczny: Bibliogr. 11 poz., fig., tab.

Twórcy

autor

Dodok T.

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovak Republic

autor

Čuboňová N.

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovak Republic

autor

Kuric I.

• Faculty of Mechanical Engineering, Department of Automation and Production Systems, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovak Republic

Bibliografia

• 1. Císar, M.: Diagnosis of equipments. In: Mechanization and automation equipment for processing. Cluj-Napoca: Publishing House Alma Mater, 2015, 209–240.
• 2. Náprstková, N: Students connecting to production problems resolutions in CAD/CAM area. In: 9th International Scientific Konference – Engineering for rural development 2010, Jelgava, 27– 28.5.2010, 310.
• 3. Čuboňová, N.: Computer aided programming of CNC machines. (Počítačová podpora programovania CNC strojov – in Slovak). EDIS ŽU Žilina, 2012, 115.
• 4. Litvaj, I.; Stančeková, D.: Knowledge management embedment in company, knowledge repositories, knowledge management significance and usage in company. In decision – making. Procedia Economics and Finance, 2015.
• 5. Legutko, S.: Materials for Cutting Tools. In. Development of Mechanical Engineering as a Tool for the Enterprise Logistics progress, published by Poznan University of Technology, Poznan 2006, 33–49.
• 6. Rudawska, A.: Selected aspects of the construction adhesive connections homogeneous and hybrid. (Wybrane zagadnenia konstruowania polaczen nadhezyjnych jednorodnych i hybrydowych – in Polish), Politechnika Lubelska, 2013, 26–6, 181.
• 7. Stuchlý, V.; Poprocký, R.: Údržba strojov a zariadení, 1. vyd. Žilina: Žilinská univerzita, 2013. 359.
• 8. Čuboňová, N.; Náprstková, N. NC Verification, Machine Simulation and NC Optimization in CAM Systems. In: 1st edition Advanced Methods and Trends in Production Engineering. Scientific Bulletin, Serie C, Volume XVIII, 5th edition The International Meeting of the Carpathian Region specialists in the field of Gears, Baia Mare, Romania, May 21-22, 2004, 57–62.
• 9. Kapustová, M.; Görögová, I.: Application of computer simulation for optimization of technological parameters of precision forging. Tehnički Vjesnik - Technical Gazette 2016, 23, 2, 357–361.
• 10. Rengevič, A.; Kumičakova, D.: New possibilities of robot arm motion simulation. Communications: scientific letters of the University of Žilina. 2016, 18, 1A, 81–86.
• 11. Kumicakova, D.; Jakubcik, M.: Specialised robotic hand designing and object grasping simulation. Applied Mechanics and Materials, vol. 282/2013, 90–98.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)