PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The silting-up prevention in the geothermal absorbent openings of Geothermal Energy Plant Pyrzyce

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents precipitation results from cold thermal water deposits that are the main cause of clogging in absorbent geothermal wells and borehole areas. As a result of physical and chemical analysis, laboratory tests and observation of the operation of a geothermal installation, a new method was developed to prevent the precipitation of sludge from cooled thermal water. The method being a modification of soft acidising was tentatively named as a super soft acidising method.
Rocznik
Strony
205--216
Opis fizyczny
Bibliogr. 21 poz., rys., tab.
Twórcy
autor
  • Przedsiębiorstwo Geologiczne POLGEOL S.A., Berezyńska 39 Street, 03-908 Warszawa, Poland
  • University of Technology and Humanities K. Pułaski in Radom, Institute of Applied Mechanics and Energy, Krasickiego 54 Street, 26-600 Radom, Poland
  • Przedsiębiorstwo MARCOR, Lęborska 9 Street, 80-386 Gdańsk, Poland
autor
  • Przedsiębiorstwo Geologiczne POLGEOL S.A., Berezyńska 39 Street, 03-908 Warszawa, Poland
autor
  • GEOTERMIA PYRZYCE Sp. z o.o., Ciepłownicza 27 Street, 74-200 Pyrzyce, Poland
  • GEOTERMIA PYRZYCE Sp. z o.o., Ciepłownicza 27 Street, 74-200 Pyrzyce, Poland
  • Przedsiębiorstwo MARCOR, Lęborska 9 Street, 80-386 Gdańsk, Poland
Bibliografia
  • 1. Akar A.A., Ignatiadis I., 2005. Modeling of deposition phenomena in low enthalpy geothermal wells. Proceedings of the World Geothermal Congress 2005. 24 - 29 April 2005, Antalya, Turkey.
  • 2. Andritsos N., Karabelas A.J., 1991. Sulfide scale formation and control: The case of lead sulfide. Geothermics, 20, 343–353. DOI: 10.1016/0375-6505(91)90025-Q.
  • 3. Arnorsson S. (Ed.), 2000. Isotopic and chemical techniques in geothermal exploration, development and use. Sampling methods, data handling, interpretations. International Atomic Energy Agency, Vienna.
  • 4. Banaś J., Mazurkiewicz B., Solarski W., 2007. Korozja metali w wodach geotermalnych. Technika Poszukiwań Geologicznych. Geotermia, Zrównoważony Rozwój, 2, 5 - 12.
  • 5. Barkman J.H., Davidson D.H., 1972. Measuring water quality and predicting well important. J. Petroleum Technology, (253) July, 865 - 873.
  • 6. Biernat H., Kulik S., Noga B., 2009. Renewable energy potential and problems related with exploitation of geothermal heat plants run on water from porous collectors. Przegląd Geologiczny, 57, 655 – 656 (in Polish).
  • 7. Biernat H., Kulik S., Noga B., 2010a. Problems associated with exploitation geothermal plants to use thermal water with rock pore. Geological Exploration Technology Geothermics, Sustainable Development, 1-2, 17 – 28 (in Polish).
  • 8. Biernat H., Kulik S., Noga B., Kosma Z., 2010b. Problemy korozji przy zatłaczaniu wykorzystanych wód termalnych. Modelowanie Inżynierskie, 8, 13 - 18.
  • 9. Biernat H., Kulik S., Noga B., Kosma Z. 2010c. Problemy inkrustacji przy zatłaczaniu wykorzystanych wód termalnych. Modelowanie Inżynierskie, 8, 7 - 12.
  • 10. Biernat H., Kulik S., Noga B., Kosma Z., 2011. Próba zapobiegania kolmatacji geotermalnych otworów zatłaczających w wyniku zastosowania miękkiego kwasowania. Modelowanie Inżynierskie, 11, 67 - 74.
  • 11. Browne P.R.L., 1984. Lectures on geothermal geology and petrology. UNU Geothermal Training Programe. Report 2. Reykjavik, Iceland.
  • 12. Bujakowska K., Biernat H., Bentkowski A., Kapuściński J., 1995. Dokumentacja hydrogeologiczna zasobów eksploatacyjnych ujęcia wód termalnych w utworach jury dolnej dla potrzeb m. Pyrzyce województwo Szczecińskie. Arch. PG POLGEOL, Warszawa.
  • 13. Fytikas M., Ungemach P., 2010. Geothermal resource management, In: Popovski K., Andritsos N., Fytikas M., Vasilevska-Popovska S., Sanner B., Ungemach P., Koutsoukos P., Valdimarsson P. (Eds.), Geothermal energy. PLM/GEOCOM/ISS Publication, available at: www.maga.con.mk.
  • 14. Malate R.C.M., 2003. Well intervention techniques. Proceedings of the International Geothermal Course. Reykjavik, Iceland, September 2003.
  • 15. Marjanowski J., Biernat H., Kulik S., Nalikowski A., Noga B., Zieliński B., 3013. Problemy kolmatacji w otworach chłonnych w Geotermii Pyrzyce oraz możliwości ich zapobiegania w wyniku zastosowania metody super miękkiego kwasowania. INSTAL, 9/2013, 34 - 38.
  • 16. Parecki A., Biernat H., 2007. Próba rozwiązania problemów towarzyszących eksploatacji ciepłowni geotermalnych wykorzystujących wody termalne z kolektorów porowych. Technika Poszukiwań Geologicznych. Geotermia, Zrównoważony Rozwój, 2, 107 - 110.
  • 17. Schröder H., Teschner M., Köhler M., Seibt P., Krüger M., Friedrich H.J., Wolfgramm M., 2007. Long term reliability of geothermal plants – examples from Germany. Proceedings of the European Geothermal Congress 2007. Unterhaching, Germany. Paper no. 137.
  • 18. Seibt P., Kabus F., Hoth P., 2005. The Neustad-Glewe Geothermal Plant – practical experience in the reinjection of cooled thermal waters into sandstone aquifers. Proceedings of the World Geothermal Congress 2005, Turkey. Paper no. 1209.
  • 19. Seibt P., Wolfgramm M., 2008. Practical experience in the reinjection of thermal waters into sandstone. Proceedings of the Workshop for decision makers on direct heating use of geothermal resources in Asia. Tianjin, China, 11-18 May, 2008. Paper no. 21.
  • 20. Ventre A.V., Ungemach P., 1998. Soft acidizing of damaged geothermal injection wells. Discussion of results achieved in the Paris Basin. Proceedings of the Twenty-Third Workshop on Geothermal Reservoir Engineering. Stanford University 1998.
  • 21. Wirght C.C., Chilingarian G.V., 1989. Water quality for subsurface injection, In: Chilingarian G.V., Robertson J.O., Kummar S., Surface operations for petroleum production, II. Developments in Petroleum Science. Elsevier.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-32962407-9a41-400d-a2b6-329f0da0d9c5
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.