A successive approximation method for thermo-elasto-plastic analysis of a reinforced functionally graded rotating disc

Kholdi, Mohsen; Saeedi, Soheil; Moradi, Sayed Ali Zargar; Loghman, Abbas; Arefi, Mohammad

doi:10.1007/s43452-021-00321-4

Artykuł - szczegóły

Tytuł artykułu

A successive approximation method for thermo-elasto-plastic analysis of a reinforced functionally graded rotating disc

Autorzy

Kholdi Mohsen , Saeedi Soheil , Moradi Sayed Ali Zargar , Loghman Abbas , Arefi Mohammad

Wybrane pełne teksty z tego czasopisma

http://www.springer.com/journal/43452

Identyfikatory

DOI

10.1007/s43452-021-00321-4

Warianty tytułu

Języki publikacji

Abstrakty

Thermo-elasto-plastic analysis of a rotating disc made of Functionally Graded Materials (FGMs) is studied in this paper using Successive Approximation Method (SAM). The plane stress condition is assumed for formulation of the problem. After computation of effective material properties based on modified mixture rule, the governing equations are derived analytically and then is solved using the Differential Quadratic Method (DQM). After obtaining the displacements and stresses, the yield conditions are calculated by von-Mises failure criteria. The rotating disc is made of an Aluminum–Silicon Carbide functionally graded material. The plastic behavior of Aluminum is considered as strain hardening one. The effects of angular speed, percentage of ceramic particles, particle reinforcement power, and boundary conditions such as temperature gradient on the radial and tangential thermo-elasto-plastic strains, stresses, and equivalent stresses is investigated. The results show that the radial stresses through the disc are significantly less than tangential stresses, therefor the tangential stresses has a significant effect on the equivalent stress and yield conditions.

Słowa kluczowe

thermo-elasto-plastic analysis modified mixture rule successive approximation method plane stress condition von-Mises failure criteria

termosprężystość naprężenie plastyczność

Wydawca

Springer
Wrocław University of Science and Technology

Czasopismo

Archives of Civil and Mechanical Engineering

Rocznik

2022

Tom

Vol. 22, no. 1

Strony

art. no e2, 2022

Opis fizyczny

Bibliogr. 62 poz., wykr.

Twórcy

autor

Kholdi Mohsen

Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, 87317-51167 Kashan, Iran

autor

Saeedi Soheil

Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, 87317-51167 Kashan, Iran

autor

Moradi Sayed Ali Zargar

Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, 87317-51167 Kashan, Iran

autor

Loghman Abbas

Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, 87317-51167 Kashan, Iran

autor

Arefi Mohammad

arefi63@gmail.com

Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, 87317-51167 Kashan, Iran

Bibliografia

1. Temesgen A, Singh SB, Thakur P Classical and nonclassical treatment of problems in elastic-plastic and creep deformation for rotating discs. In: Materials Physics and Chemistry, pp. 1–70. Apple Academic Press, 2020.
2. EkhteraeiToussi, Hamid, Farimani MR (2012) Elasto-plastic deformation analysis of rotating disc beyond its limit speed. In: International Journal of Pressure Vessels and Piping 89: 170–177. https://doi.org/10.1016/j.ijpvp.2011.11.001.
3. Altan G, Topçu M. Thermo-elastic stress of a metal-matrix composite disc under linearly-increasing temperature loading by analytical and FEM analysis. Adv Eng Softw. 2010;41(4):604–10. https://doi.org/10.1016/j.advengsoft.2009.11.007.
4. You LH, Zhang JJ. Elastic-plastic stresses in a rotating solid disk. Int J Mech Sci. 1999;41(3):269–82. https:// doi. org/ 10. 1016/S0020-7403(98)00049-6.
5. Lu Z, Zhao L, Ding H, Chen L. A dual-functional metamaterial for integrated vibration isolation and energy harvesting. J Sound Vib. 2021;509:116251. https://doi.org/10.1016/j.jsv.2021.116251.
6. Cheng Z, Liu Y, Jun Zhao Hu, Feng, and Yizhang Wu. Numerical simulation of crack propagation and branching in functionally graded materials using peridynamic modeling. Eng Fract Mech. 2018;191:13–32. https://doi.org/10.1016/j.engfracmech.2018.01.016.
7. Nikbakht S, Kamarian S, Shakeri M. A review on optimization of composite structures Part II: functionally graded materials. Compos Struct. 2019;214:83–102. https:// doi. org/ 10. 1016/j. Comps truct.2019.01.105.
8. Bayat M, Sahari BB, Saleem M, Hamouda AMS, Reddy J. N Thermo elastic analysis of functionally graded rotating disks with temperature-dependent material properties: uniform and variable thickness. Int J Mech Materials Design. 2009;5(3):263–79. https://doi.org/10.1007/s10999-009-9100-z.
9. Nejad MZ, Rastgoo A, Hadi A. Exact elasto-plastic analysis of rotating disks made of functionally graded materials. Int J Eng Sci. 2014;85:47–57. https://doi.org/10.1016/j.ijengsci.2014.07.009.
10. Khorsand M, Tang Y. Design functionally graded rotating disks under thermoelastic loads: weight optimization. Int J Press Vessels Pip. 2018;161:33–40. https://doi.org/10.1016/j.ijpvp.2018.02.002.
11. Jahed H, Dubey RN. An axisymmetric method of elastic-plastic analysis capable of predicting residual stress field. J Pressure Vessel Technol. 1997;119(3):264–73. https://doi.org/10.1115/1.2842303.
12. Jahed H, Sethuraman R, Dubey RN. A variable material property approach for solving elastic-plastic problems. Int J Press Vessels Pip. 1997;71(3):285–91. https://doi.org/10.1016/S0308-0161(96)00079-8.
13. Mahdavi E, Akbari Alashti R, Cheloee Darabi A, Alizadeh M (2013) Linear thermoplastic analysis of FGM rotating discs with variable thickness. Iranian J Mech Eng Trans ISME 14(2: 73–87.
14. Xu X, Karami B, Shahsavari D (2021) Time-dependent behavior of porous curved nanobeam. Int J Eng Sci 160. https://doi.org/101016/j.ijengsci.2021.103455.
15. Mousavi AA, Zhang C, Masri SF, Gholipour G (2021) Structural damage detection method based on the complete ensemble empirical mode decomposition with adaptive noise: a model steel truss bridge case study. Struct Health Monitoring 84049609. doi: https://doi.org/10.1177/14759217211013535.
16. Zhao X, Zhu WD, Li YH. Analytical solutions of nonlocal coupled thermoelastic forced vibrations of micro-/nano-beams by means of Green’s functions. J Sound Vib. 2020;481: 115407. https://doi.org/10.1016/j.jsv.2020.115407.
17. Zhang B, Chen Y, Wang Z, Li J, Ji H. Influence of mach numer of main flow on film cooling characteristics under supersonic condition. Symmetry (Basel). 2021;13(127):127. https://doi.org/10.3390/sym13010127.
18. Liu C, Gao X, Chi D, He Y, Liang M, Wang H. On-line chatter detection in milling using fast kurtogram and frequency band power. Euro J Mech A Solids. 2021;90: 104341. https://doi.org/10.1016/j.euromechsol.2021.104341.
19. Zheng Y, Bahaloo H, Mousanezhad D, Mahdi E, Vaziri A, Nayeb-Hashemi H. Stress analysis in functionally graded rotating disks with non-uniform thickness and variable angular velocity. Int J Mech Sci. 2016;119:283–93. https://doi.org/10.1016/j.ijmecsci.2016.10.018.
20. Yildirim V (2019) Thermomechanical characteristics of a functionally graded mounted uniform disc with/without rigid casing. J Aerospace Technol Manag 11. https://doi.org/10.5028/jatm.v11.1008.
21. Sharma S, Yadav S. Numerical solution of thermal elastic-plastic functionally graded thin rotating disk with exponentially variable thickness and variable density. Therm Sci. 2019;23(1):125–36. https://doi.org/10.2298/TSCI131001136S.
22. Nayak P, Bhowmick S, Saha KN. Elasto-plastic analysis of thermo-mechanically loaded functionally graded disks by an iterative variational method. Eng Sci Technol Int J. 2020;23(1):42–64. https://doi.org/10.1016/j.jestch.2019.04.007.
23. Xu J, Wu Z, Chen H, Shao L, Zhou X, Wang S (2021) Triaxial shear behavior of basalt fiber-reinforced loess based on digital image technology. KSCE J Civ Eng, 13 pages. https://doi.org/10.1007/s12205-021-2034-1.
24. Deng H, Chen Y, Jia Y, Pang Y, Zhang T, Wang S, Yin L. Microstructure and mechanical properties of dissimilar NiTi/Ti6Al4V joints via back-heating assisted friction stir welding. J Manuf Process. 2021;64:379–91. https://doi.org/10.1016/j.jmapro.2021.01.024.
25. Xie J, Chen Y, Yin L, Zhang T, Wang S, Wang L. Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating. J Manuf Process. 2021;64:473–80. https://doi.org/10.1016/j.jmapro.2021.02.009.
26. Nejad MZ, Alamzadeh N, Hadi A. Thermoelastoplastic analysis of FGM rotating thick cylindrical pressure vessels in linear elastic-fully plastic condition. Compos B. 2018;154:410–22. https://doi.org/10.1016/j.compositesb.2018.09.022.
27. Fan P, Deng R, Qiu J, Zhao Z, Wu S. Well logging curve reconstruction based on kernel ridge regression. Arab J Geosci. 2021;14:1559. https://doi.org/10.1007/s12517-021-07792-y.
28. Li T, Dai Z, Yu M, Zhang W. Numerical investigation on the aerodynamic resistances of double-unit trains with different gaplengths. Eng Appl Comput Fluid Mech. 2021;15(1):549–60. https://doi.org/10.1080/19942060.2021.1895321.
29. Fan Z, Ji P, Zhang J, Segets D, Chen D, Chen S. Wavelet neural network modeling for the retention efficiency of sub-15 nm nano-particles in ultrafiltration under small particle to pore diameter ratio. J Membr Sci. 2021;635: 119503. https://doi.org/10.1016/j.memsci.2021.119503.
30. Li X, Yang H, Zhang J, Qian G, Yu H, Cai J. Time-Domain Analysis of Tamper Displacement during Dynamic Compaction Based on Automatic Control. Coatings, 2021;11(9). https://doi.org/10.3390/coatings11091092.
31. Wang D, Ju Y, Shen H, Xu L. Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber. Constr Build Mater. 2019;197:464–73. https://doi.org/10.1016/j.conbuildmat.2018.11.181.
32. Yang Z, Tam M, Zhang Y, Kitipornchai S, Lv J, Yang J. Nonlinear dynamic response of FG graphene platelets reinforced composite beam with edge cracks in thermal environment. Int J Struct Stab Dyn. 2020;20(14):2043005. https://doi.org/10.1142/S0219455420430051.
33. Yang Z, Feng C, Jie Yang Yu, Wang JL, Liu A, Jiyang Fu. Geometrically nonlinear buckling of graphene platelets reinforced dielectric composite (GPLRDC) arches with rotational end restraints. Aerosp Sci Technol. 2020;107: 106326. https://doi.org/10.1016/j.ast.2020.106326.
34. Shiping Zhang, Ronald YS, Pak Junhui Zhang. Three-dimensional frequency-domain Green's functions of a finite fluid-saturated soil layer underlain by rigid bedrock to interior loadings. Int J Geomech. 2021. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002235.
35. Yang Z, Di Wu, Yang J, Lai S-K, Lv J, Liu A, Jiyang Fu. Dynamic buckling of rotationally restrained FG porous arches reinforced with graphene nanoplatelets under a uniform step load. Thin-Walled Structures. 2021;166: 108103. https://doi.org/10.1016/j.tws.2021.108103.
36. Huang X, Yang J, Yang Z. Thermo-elastic analysis of functionally graded graphene nanoplatelets (GPLs) reinforced closed cylindrical shells. Appl Math Model. 2021;97:754–70. https://doi.org/10.1016/j.apm.2021.04.027.
37. Arefi M. Elastic solution of a curved beam made of functionally graded materials with different cross sections. Steel Compos Struct. 2015;18(3):659–72.
38. Yang Z, Zhao S, Yang J, Lv J, Liu A, Fu J (2020) In-plane and out-of-plane free vibrations of functionally graded composite arches with graphene reinforcements. Mech Adv Materials Struct: 1–11. https://doi.org/10.1080/15376494.2020.1716420.
39. Yang Z, Liu A, Yang J, Lai S-K, Lv J, Jiyang Fu. Analytical prediction for nonlinear buckling of elastically supported FG-GPLRC arches under a central point load. Materials. 2021;14(8):2026. https://doi.org/10.3390/ma14082026.
40. Mendelson A. Plasticity: theory and application. New York: Macmillan; 1968.
41. Luo Z, Li X, Shang J, Zhu H, Fang D. Modified rule of mixtures and Halpin-Tsai model for prediction of tensile strength of micron-sized reinforced composites and Young’s modulus of multiscale reinforced composites for direct extrusion fabrication. Adv Mech Eng. 2018;10(7):1687814018785286.
42. Hine P, Parveen B, Brands D, Caton-Rose F. Validation of the modified rule of mixtures using a combination of fibre orientation and fibre length measurements. Compos A Appl Sci Manuf. 2014;64:70–8. https://doi.org/10.1016/j.compositesa.2014.04.017.
43. Suresh S, Mortensen A. Functionally graded metals and metal-ceramic composites: part 2 Thermomechanical behaviour. Int Mater Rev. 1997;42(3):85–116. https://doi.org/10.1179/imr.1997.42.3.85.
44. Bhattacharyya M, Kapuria S, Kumar AN. On the stress to strain transfer ratio and elastic deflection behavior for Al/SiC functionally graded material. Mech Adv Mater Struct. 2007;14(4):295–302. https://doi.org/10.1080/1537649060081791.
45. Madan R, Bhowmick S, Saha K. A study based on stress-strain transfer ratio calculation using Halpin-Tsai and MROM material model for limit elastic analysis of metal matrix FG rotating disk. FME Transactions. 2020;48(1):204–10.
46. Vaghefi R. Thermo-elastoplastic analysis of functionally graded sandwich plates using a three-dimensional meshless model. Compos Struct. 2020;242: 112144. https://doi.org/10.1016/j.comps truct.2020.112144.
47. Saeedi S, Kholdi M, Loghman A, Ashrafi H, Arefi M. Thermo-elasto-plastic analysis of thick-walled cylinder made of function-ally graded materials using successive approximation method. Int J Press Vessels Pip. 2021;194: 104481. https://doi.org/10.1016/j.ijpvp.2021.104481.
48. Cho JR, Tinsley Oden J (2000) Functionally graded material: a parametric study on thermal-stress characteristics using the Crank–Nicolson–Galerkin scheme. Comput Methods Appl Mech Eng 188(1–3): 17–38. https://doi.org/10.1016/S0045-7825(99)00289-3.
49. Chakrabarty J Theory of plasticity. Elsevier, 2012.
50. Zhong W, Gao F, Ren Y Generalized differential quadrature method for free vibration analysis of a rotating composite thin-walled shaft. Math Prob Eng 2019 (2019). https://doi.org/10.1155/2019/1538329.
51. Zhong W, Gao F, Ren Y Generalized differential quadrature method for free vibration analysis of a rotating composite thin-walled shaft. Math Prob Eng 2019 (2019).
52. Arshid E, Amir S, Loghman A. Thermal buckling analysis of FG graphene nanoplatelets reinforced porous nanocomposite MCST-based annular/circular microplates. Aerosp Sci Technol. 2021;111: 106561. https://doi.org/10.1016/j.ast.2021.106561.
53. Singhal P, Bindal G. Generalised differential quadrature method in the study of free vibration analysis of monoclinic rectangular plates. Am J Comput Appl Math. 2012;2(4):166–73. https://doi.org/10.5923/j.ajcam.20120204.05.
54. Malik M, Civan F. A comparative study of differential quadrature and cubature methods vis-à-vis some conventional techniques in context of convection-diffusion-reaction problems. Chem Eng Sci. 1995;50(3):531–47. https://doi.org/10.1016/0009-2509(94)00223-E.
55. Golchi, Majid, Mostafa Talebitooti, and Roohollah Talebitooti. "Thermal buckling and free vibration of FG truncated conical shells with stringer and ring stiffeners using differential quadrature method." Mechanics Based Design of Structures and Machines (2019). https://doi.org/10.1080/15397734.2018.1545588.
56. Arshid E, Khorshidvand AR. Free vibration analysis of saturated porous FG circular plates integrated with piezoelectric actuators via differential quadrature method. Thin-Walled Struct. 2018;125:220–33.
57. Kalali AT, Hassani B, Hadidi-Moud S. Elastic-plastic analysis of pressure vessels and rotating disks made of functionally graded materials using the isogeometric approach. J Theor Appl Mech. 2016;54(1):113–25.
58. Kalali AT, Hadidi-Moud S. A semi-analytical approach to elastic-plastic stress analysis of FGM pressure vessels. J Solid Mech. 2013;5(1):63–73.
59. Ye R, Liu P, Shi K, Yan B. State damping control: a novel simple method of rotor UAV with high performance. IEEE access. 2020;8:214346–57. https://doi.org/10.1109/ACCESS.2020.3040779.
60. Du Y, Pan N, Xu Z, Deng F, Shen Y, Kang H. Pavement distress detection and classification based on YOLO network. The international journal of pavement engineering, 2021;1–14 https://doi.org/10.1080/10298436.2020.1714047.
61. Zhong Q, Yang J, Shi K, Zhong S, Zhixiong L, Angel SM. Event-Triggered H Load Frequency Control for Multi-Area Nonlinear Power Systems Based on Non-Fragile Proportional Integral Control Strategy. IEEE Trans Intel Transp Syst. 2021. https://doi.org/10.1109/TITS.2021.3110759.
62. Mou B, Bai Y. Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone. Engineering Structures. 2018;168:487–504. https://doi.org/10.1016/j.engstruct.2018.04.029.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023)

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-327fe460-2139-47ec-aa53-9b9432c5588b