Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The paper presents analyses of the municipal waste stability, stored in a landfill with the specific parameters of the waste massif, such as height, width and slope inclination. The massif of waste is lined by a simple drainage/sealing layer, consisting of a sand layer, non-woven geotextile, HDPE double-textured geomembrane and two different sealing mineral layers. The structure stability analysis was performed using a numerical program, relating to the methods: Fellenius/Petterson, Bishop, Spencer, Janbu and Morgenstern-Price. The considerations were carried out according to approach 3 (DA3) for the ultimate limit state GEO of Eurocode 7. The values of the utilization factor and the factor of safety were compared. Municipal waste is generally stable if the slope of the waste is ≤25°. With a slope inclination of 30°, the structures of waste massifs are stable up to a height of 10 m. Using the Fellenius/Petterson method can lead to an underestimation of the factor of safety and an overstatement of the degree of utilization; other methods give comparable results. Changing the material of the mineral sealing layer leads to a change in the course of the circular slip line.
Czasopismo
Rocznik
Tom
Strony
125--133
Opis fizyczny
Bibliogr. 26 poz.
Twórcy
- Prof. DSc PhD Eng.; Faculty of Civil Engineering and Environmental Sciences, Bialystok University of Technology, Wiejska 45A, 14-351 Bialystok, Poland
autor
- MSc Eng.; Doctoral School of Bialystok University of Technology, Wiejska 45A, 14-351 Bialystok, Poland
Bibliografia
- [1] Bond, A., Harris, A.: Decoding Eurocode 7. London and New York: Taylor & Francis.
- [2] Daniel, D. E.: Geotechnical practice for waste disposal. London, Chapman & Hall, London. 1997.
- [3] Dixon, N., Russell, D., Jones, V. (2005). Engineering properties of municipal solid waste. Geotextiles and Geomembranes, 23, 205–233.
- [4] EN 1997-1:2004 (2004). Eurocode 7: Geotechnical design - Part 1.
- [5] European Technical Committee No. 8 (ETC 8), (1993). Geotechnics of Landfill Design and Remedial Works – Technical Recommendation GLR. Berlin: Ernst & Sohn,
- [6] Gomes, C. C., Lopes, M. de L. C. (2012). Characterisation of municipal solid waste physical properties and their evolution with age. Geotechnical Engineering, 165(1), 12–34.
- [7] Huang, Y., Fan, G. (2016). Engineering geological analysis of municipal solid waste landfill stability. Natural Hazards, 84, 93–107.
- [8] Koda, E. (2009). Składowiska odpadów. Stateczność zboczy wysypisk odpadów komunalnych (Landfills. Stability of municipal landfill slopes). In: XXIV Ogólnopolskie Warsztaty Pracy Projektanta Konstrukcji, Wisła, 13–49.
- [9] Koda, E., Grzyb, M., Osiński, P., Vaverkova M. D. (2019). Analysis of failure in landfill construction elements. MATEC Web of Conferences, 284, no. 03002.
- [10] Koda, E., Kiersnowska, A., Kawalec, J., Osiński, P. (2020). Landfill slope stability improvement incorporating reinforcements in reclamation process applying observational method. Applied Sciences, 10, no. 1572.
- [11] Łuczak-Wilamowska, B. (2013). Uwarunkowania geologiczne składowania odpadów komunalnych (Geological conditions of storage of municipal waste). Biuletyn Państwowego Instytutu Geologicznego, 455, 1–142.
- [12] Mitchell, J.K., Seed, R.B., Seed, H.B. (1990). Kettleman Hills waste landfill slope failure. I: liner-system properties. Journal of Geotechnical Engineering, 116, 647–668.
- [13] Qian X., Koerner R. M. (2017). Critical interfaces and waste placement in landfill design. Environmental Geotechnics, 4(3), 160–170.
- [14] Rowe, R.K., Quigley, R.M., Brachman, R.W.I., Booker, J.R. (2004). Barrier systems for waste disposal facilities. London: Taylor & Francis Books Ltd. (E & FN Spon).
- [15] Rozporządzenie Ministra Środowiska z dnia 30 kwietnia 2013 r. w sprawie składowisk odpadów (Regulation of the Minister of the Environment of 30 April 2013 on landfills) (Dz. U. 2013 poz. 523 z póź. zm.).
- [16] Seed, R.B., Mitchell, J.K., Seed, H.B. (1990). Kettleman Hills waste landfill slope failure. II: stability analyses. Journal of Geotechnical Engineering, 116, 669–690.
- [17] Stark, T. D., Poeppel, A. R. (1994). Landfill liner interface strengths from torsional–ring–shear tests. Journal of Geotechnical Engineering, 120(3), 597–615.
- [18] Sulewska, J. (2019). Stateczność konstrukcji składowisk odpadów (Stability of the waste landfill structure). (MSc thesis, Bialystok University of Technology, Poland, Bialystok.
- [19] Ustawa z dnia 14 grudnia 2012 r. o odpadach (Act of 14 December 2012 on waste) (Dz.U. 2022 poz. 699).
- [20] Wasil, M. (2020). Effect of bentonite addition on the properties of fly ash as a material for landfill sealing layers. Applied Sciences, 10(4), no. 1488.
- [21] Zabielska-Adamska, K. (2019). Grunty antropogeniczne. Zagęszczalność i właściwości gruntów zagęszczanych (Anthropogenic soils. Compactability and properties of compacted soils). Studia z zakresu inżynierii No. 106, Warsaw: KILiW PAN.
- [22] Zabielska-Adamska, K. (2019). Water content-density criteria for determining geomembrane-fly ash interface shear strength. MATEC Web of Conferences, 262, no. 04005.
- [23] Zabielska-Adamska, K. (2020). Hydraulic conductivity of fly ash as a barrier material: some problems in determination. Environmental Earth Sciences, 79, no. 321.
- [24] Zabielska-Adamska, K., Sulewska J. (2019). Analiza stateczności składowanych odpadów komunalnych (Analysis of stability of stored municipal waste). Inżynieria Morska i Geotechnika, 6, 302–307.
- [25] Zadroga, B., Olańczuk-Neyman, K. (2001). Ochrona i rekultywacja podłoża gruntowego. Aspekty geotechniczno-budowlane (Protection and reclamation of the subsoil. Geotechnical and construction aspects). Gdańsk: Oficyna Wydawnicza Politechniki Gdańskiej.
- [26] Zydroń, T., Cholewa, M., Demczuk, P. (2015). Wytrzymałość na ścinanie odpadów komunalnych a stateczność skarp konstrukcji (Shear strength of municipal waste and stability of structure slopes). Acta Scientiarum Polonorum Formatio Circumiectus 14(4), 141–155.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-32793f43-e1ac-4234-8ea2-dc9150b3ead5