A preliminary study on enrichment of Anini iron ore for use by Algerian metallurgical industry

• Autorzy: Chaabia R. , Bounouala M. , Boukelloul M. L.

Identyfikatory

DOI

10.5277/msc152217

• Języki publikacji: EN

Abstrakty

EN

The Anini iron ore contains mainly ferriferous hematite rocks with inclusions of quartz and clay. The chemical analysis showed that the average content of iron is 55% while SiO2 and Al2O3 is 26.20% and 12%, respectively. The XRD mineralogical analysis confirmed that the prevailing mineral phase are hematite, quartz, clay and some inclusions of calcite in this matrix. According to the tests, preliminary desliming by washing provides iron 62% is the concentrate while SiO2 decreases from 26.20% to 2.30% and Al2O3from 12% to 3%. The calculated partial basicity index Ip= (CaO/SiO2) was 1.07, meaning that the washed-out ore achieves standards to be used in metallurgy. The by-products remaining after washing (quartz, clay and a small content of iron) can be used in cement production.

Słowa kluczowe

EN

enrichment; iron ore; desliming; basicity index; metallurgy

• Wydawca: Wydział Geoinżynierii, Górnictwa i Geologii, Instytut Górnictwa Politechniki Wrocławskiej
• Czasopismo: Mining Science
• Rocznik: 2015
• Tom: Vol. 22
• Strony: 201--213
• Opis fizyczny: Bibliogr. 12 poz., rys., tab.

Twórcy

autor

Chaabia R.

• Department of Mining, Faculty Earth Sciences, Badji Mokhtar-Annaba University, Annaba, Algeria

autor

Bounouala M.

• Department of Mining, Faculty Earth Sciences, Badji Mokhtar-Annaba University, Annaba, Algeria

autor

Boukelloul M. L.

• Department of Mining, Faculty Earth Sciences, Badji Mokhtar-Annaba University, Annaba, Algeria

Bibliografia

• 1. DAS B., MOHAPATRA B. K., REDDY P. S. R., DAS, S., 1995. Characterization and beneficiation of iron ore slimes for further processing, Powder Handling and Process, 7(1), 41–44.
• 2. GHAMOUD, K., 2009. Audit environnemental de la carrière de djebel Anini "FERPHOS", Bureau d’Etudes Géologiques & Minières, Rapport inédit, 51.
• 3. GUJRAJ B., SHARMA J. P., BALDAWA A., ARORA S. C. D., PRASAD N., BISWAS A. K., 1983. Dispersion-flocculation studies on hematite-clay systems, International Journal of Mineral Processing, vol, 11, 285–302.
• 4. DRZYMALA J.,FUERSTENAU D. W., 2014. Selective flocculation of hematite in quartz–hematite–ferricion–polyacrylic acid system, Part 2, Effect of grinding and a hydrofluoric treatment on selectivity of flocculation, International Journal of Mineral Processing, vol. 129, –5.
• 5. JENA S. K., SAHOO H., RATH S. S., RAO D. S., DAS S. K., DAS B., 2015. Characterization and Processing of Iron Ore Slimes for Recovery of Iron Values, Mineral Processing and Extractive Metallurgy Review, 36:3, 174–182.
• 6. MAHIUDDIN S., BANDOPADHYAY S., BARUAH J. N., 1989. A study on the beneficiation of Indian iron ore fines and slime using chemical additives, International Journal of Mineral Processing, vol, 11, 285–302.
• 7. MARYAM S., CLAUDE B., MARILÈNE R., 2014. Effect of wash water on the mineral size recovery curves in a spiral concentrator used for iron ore processing, International Journal of Mineral Processing, 129, 22–26.
• 8. MOHANTY S. and DAS B., 2010. Optimization studies of hydrocyclone for beneficiation of iron ore slimes, Mineral Processing & Extractive Metall. Rev., 31:2, 86–96.
• 9. MOUNA C., 2011. Synthèse de gels phosphocalciques issus de déchets industriels carbonatés Caractérisation physico-chimique, thermique et rhéologique, Thèse de doctorat, université de Toulouse, 170.
• 10. OLIVIER D., 2012. Minerai de fer, l’émergence d’une nouvelle commodité sur les marchés financiers, Haute École de Gestion de Genève (HEG-GE), 57.
• 11. SUBRATA R., 2009. Recovery improvement of fine iron ore particles by multi gravity separation, The Open Mineral Processing Journal, 2, 17–30.
• 12. UPADHYAY R.K. and VENKATESH A.S., 2006. Current strategies and future challenges on exploration, beneficiation and value addition of iron ore resources with special emphasis on iron ores from eastern India, Applied Earth Science IMM Transactions Section B, vol, 115, 187–195.