Digital Factory supported by simulation and metamodelling

• Autorzy: Gregor M. , Hromada J , Matuszek J.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of research done at the University of Žilina and SLCP Consulting on the area of Digital Factory. The paper focuses on research of support tools e.g. computer simulation and metamodeling in the framework of Digital Factory. The chosen results of research are presented in the paper. The theoretical assumptions and developments were validated on the chosen production systems.

Słowa kluczowe

EN

Digital Factory; simulation; metamodelling

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2008
• Tom: Vol. 4, no 2
• Strony: 63--74
• Opis fizyczny: Bibliogr. 14 poz., fig., tab.

Twórcy

autor

Gregor M.

• Department of Industrial Engineering, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovak Republic

autor

Hromada J

• SLCP Consulting, Univerzitná 6, 010 08 Žilina, Slovak Republic

autor

Matuszek J.

• Bielsko-Biała University, Faculty of Mechanical Engineering and Computer Sciences, Willowa 2, 43-309 Bielsko-Biała, Poland

Bibliografia

• [1]FURMANN R., GREGOR M.: Virtual design – how to be closer to the world class? Informatyka, Organizacja i Zarzadzanie, ATH Bielsko Biala, 2005, pp. 35-40, ISSN 1644-0315.
• [2] GREGOR M. et al.: Virtual reality technology as a support for competitiveness and productivity improvement (in Slovak), University of Zilina. Research project, No.: APVT-20-026304.
• [3] GREGOR M. et al.: Research of possible utilization of Digital Factory in the Slovak Industry. University of Zilina, Research project, No.: AV 4/0021/05.
• [4] GREGOR M., KOSTURIAK J., HRDLICZKA V., ACEL P.: Simulation based comparison of various production control strategies suitable for lean production. In: Modeling and Simulation. Proceedings of the International Conference. SULOV´93, 1993, pp. 176-183 (in Slovak).
• [5] GREGOR M., KOŠTURIAK J.: Just-in-Time. Production Philosophy for a Good Management, ELITA, Bratislava, 1994.
• [6] GREGOR M., MEDVECKY S., MICIETA B., MATUSZEK J., HRCEKOVA A.: Digital Factory, SLCP Zilina, 148 pp., KRUPA print 2007, ISBN 80-969391-5-7.
• [7] GSTETTNER S., KUHN H.: Analysis od Production Control Systems Kanban and CONWIP. International Journal of Production Research, 1996, Vol.34, No.11, pp.3253-3273.
• [8] HUANG P. Y., REES L. P., TAYLOR III B. W.: A simulation analysis of Japanese just - in time technique (with Kanbans) for a multiline, multistage production system. Decision Sciences, 1983, 14(3), 326-344.
• [9] KOŠTURIAK J., GREGOR M.: Simulation von Produktionssystemen. Springer Verlag, Wien, 1995.
• [10] LEE L. C.: Parametric appraisal of JIT system. International Journal of Production Research, 1987, 25(10), 1415-1429.
• [11] MICIETA B. et al: Virtual Reality in sophisticated assembly processes (in Slovak), University of Zilina, Research project, No.: AV 1014/2003.
• [12] PHILIPOOM P. R., REES L. P., TAYLOR III B. W., HUANG P. Y.: An investigation of the factors influencing the number of Kanbans required in the implementation of the JIT technique with Kanbans. International Journal of Production Research, 1987, 25(3), 457-472.
• [13] SPERMAN M. L., WOODRUFF D. L., HOPP W.J.: CONWIP: Pull alternative to Kanban. International Journal of Production Research, 1990, 28, 879-894.
• [14] STEFANIK A., GREGOR M.: Rapid development of the new production system with the support of computer simulation, Rapid technologies, Wroclaw, CAMT, October 2004, pp.234-242.