Verification of Staff Proficiency in the Calibration Laboratory on Voltage, Frequency, Resistance and Capacity Measurements

• Autorzy: Warzec A. , Marszalec M. , Lusawa M.
• Języki publikacji: EN

Abstrakty

EN

The Laboratory of Electrical, Electronic and Optoelectronic Metrology is accredited by the Polish Center of Accreditation for nearly two decades. Over time, the requirements of proficiency verification are growing continuously. In order to satisfy higher and higher of reliability demands the most promising staff proficiency verification estimators were examined for voltage, frequency, resistance and capacity measurements. The article presents measurement systems used for verification, analysis of results or simulations, and shows conclusion for selecting the best solution.

Słowa kluczowe

EN

Calibration and Measurement Capability; staff proficiency verification

• Wydawca: Instytut Łączności - Państwowy Instytut Badawczy
• Czasopismo: Journal of Telecommunications and Information Technology
• Rocznik: 2016
• Tom: nr 4
• Strony: 94--101
• Opis fizyczny: Bibliogr. 6 poz., rys., tab.

Twórcy

autor

Warzec A.

• Central Chamber for Telecommunications Measurements, National Institute of Telecommunications, Szachowa st 1, 04-894 Warsaw, Poland

autor

Marszalec M.

• Central Chamber for Telecommunications Measurements, National Institute of Telecommunications, Szachowa st 1, 04-894 Warsaw, Poland

autor

Lusawa M.

• Central Chamber for Telecommunications Measurements, National Institute of Telecommunications, Szachowa st 1, 04-894 Warsaw, Poland

Bibliografia

• [1] P. Konieczka and J. Namieśnik, Eds., Ocena i Kontrola Jakości Wyników Porównań Analitycznych. Warsaw, Poland: Wydawnictwa Naukowo Techniczne, 2007 (in Polish).
• [2] ISO 13528:2015(E) “Statistical methods for use in proficiency testing by interlaboratory comparison”, 2nd ed. ISO 2015, Switzerland 2015.
• [3] R. Zieliński, Tablice Statystyczne. Warsaw, Poland: Państwowe Wydawnictwa Naukowe, 1972 (in Polish).
• [4] A. D. Aczel, Complete Bussiness Statistics, 2nd ed. Irwin, Burr Ridge, Illinois; Boston Massachusetts; Sydney, Australia; 1989 and 1993.
• [5] JCGM 100:2008, “Evaluation of measurement data – Guide to the expression of uncertainty in measurement”, Bureau International des Poids et Mesures, Joint Committee for Guides in Metrology, Sept. 2008 [Online]. Available: www.bipm.org/utils/common/documents/ jcgm/JCGM 100 2008 E.pdf
• [6] ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories, 2nd ed. Switzerland 2005.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).