Fatigue Tests and Metallographic of Explosively Cladded Steel-Titanium Bimetal

• Autorzy: Kurek A. , Wachowski M. , Niesłony A. , Płociński T. , Kurzydłowski K. J.

Identyfikatory

DOI

10.2478/amm-2014-0265

Warianty tytułu

PL

Badania zmęczeniowe i metalograficzne bimetalu stal-tytan zgrzewanego wybuchowo

• Języki publikacji: EN

Abstrakty

EN

The paper contains a description of fatigue life tests of titan-steel bimetal. The study involved specimens made of bimetal which was a combination of S355J2 steel and SB G1 265 titanium, which was imposed in the material by explosive cladding method. The research shows that the fatigue life of specimens made of native material, derived from cladded plate is less than the life of specimens of titanium-steel bimetal

PL

W pracy zawarto wyniki badań zmęczeniowych i metalograficznych bimetalu będącego połączeniem stali S355J2 z tytanem SB265G1 przy pomocy technologii zgrzewania wybuchowego. Analiza wyników badań dowodzi, że proces zgrzewania wybuchowego i obróbki cieplnej mają wpływ na trwałość zmęczeniowa materiału. Ponadto stwierdzono, że w procesie projektowania elementów narażonych na zmiennę obciążenia należy uwzględnić własności wszystkich materiałów wchodzących w skład plateru.

Słowa kluczowe

EN

fatigue life; explosive cladding; explosive welding; clads

PL

odporność na zmęczenie; zgrzewanie wybuchowe; platerowanie; obróbka cieplna

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2014
• Tom: Vol. 59, iss. 4
• Strony: 1565--1570
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Kurek A.

• Opole University of Technology, 76 Prószkowska Str., 45-758 Opole, Poland

autor

Wachowski M.

• Warsaw University of Technology, 141 Wołoska Str., 02-507 Warsaw, Poland

autor

Niesłony A.

• Opole University of Technology, 76 Prószkowska Str., 45-758 Opole, Poland

autor

Płociński T.

• Warsaw University of Technology, 141 Wołoska Str., 02-507 Warsaw, Poland

autor

Kurzydłowski K. J.

• Warsaw University of Technology, 141 Wołoska Str., 02-507 Warsaw, Poland

Bibliografia

• [1] A. Niesłony, A. Kurek, R. Bański, L. Čižek, Static and fatigue tests of explosively cladded materials -titanium-steel, Scientific Papers Opole University of Technology,Series Mechanics 97, 337 (2010) (in polish).
• [2] W. Babul, The Development of Explosive Metalworking inPoland, Archives of Metallurgy and Materials 59, 3, 1111-1113(2014) DOI: 10.2478/amm-2014-0193.
• [3] C. R. Mckenney, J. G. Banker, Explosion-Bonded Metals for Marine Structural Applications, Marine Technology, 285-292, (1971).
• [4] A. Kurek, A. Niesłony, Fatigue Life Tests of Explosively Cladded Steel-Titanium Bimetal, Materials Science Forum 726, 106-109 (2012).
• [5] A. Karolczuk, M. Kowalski, R. Bański, F. Zok, Fatigue phenomena in explosively welded steel-titanium clad components subjected to push-pull loading, International Journal of Fatigue 48:101-108. doi: 10.1016/j.ijfatigue.2012.10.007 (2013).
• [6] J. Lindemann, L. Wagner, Mean stress sensitivity in fatigue of α, (αβ) and β titanium alloys. Materials Science and Engineering A 234-236:1118-1121. doi: 10.1016/S0921-5093(97)00347-X, (1997).
• [7] B. Wronka, Testing of explosive welding and welded joints: joint mechanism and properties of explosive welded joints.J Mater Sci 45:4078-4083. doi: 10.1007/s10853-010-4494-4 (2010).
• [8] B. Wronka, Testing of explosive welding and welded joints. Wavy character of the process and joint quality. International Journal of Impact Engineering 38:309-313. doi: 10.1016/j.ijimpeng.2010.11.003, (2011).
• [9] A. Karolczuk, M. Kowalski, K. Kluger, F. Zok, Identification of Residual Stress Phenomena Based on the Hole Drilling Method in Explosively Welded Steel-Titanium Composite, Archives of Metallurgy and Materials 59, 3, 1119-1123 (2014) DOI: 10.2478/amm-2014-0195.
• [10] A. Niesłony, A.Kurek, Influence of the Selected Fatigue Characteristics of the Material on Calculated Fatigue Life under Variable Amplitude Loading, Applied Mechanics and Materials 104, 197-205 (2011).
• [11] P. Tamilchelvan, K. Raghukandan, K. Hokamoto, H. C. Dey, A. K. Bhaduri, Effect on explosive cladding of titan 12/SS304L plates under multiple conditions (design matrix), Materials Science Forum 465-466, 207 (2004).
• [12] A. Durgutlu, B.Gülenç, F. Findik, Examination of copper/stainless steel joints formed by explosive welding. Materials and Design 26 (2005).
• [13] B B.Gülenç, F. Findik, Investigation of explosive welding parameters and their effects on microhardness and shear strength. Materials and Design 24 (2003).
• [14] N. Kahraman, B.Gülenç ¸ F. Findik, Joining of titanium/ stainless steel by explosive welding and effect on interface. Journal of Materials Processing Technology 169 (2005).
• [15] Y. Morizono, M. Nishida, A. Chiba, T. Yamamuro, Effect of Heat Treatment on Formation of Columnar Ferrite Structure in Explosively Welded Titanium/ Hypoeutectoid Steel Joints, Materials Science Forum 465-466, (2004).
• [16] I.. A. Bataev, A. A. Bataev, V. I.. Mali, V. G. Burov, E. A. Prikhodko, Formation and Structure of Vortex Zones Arising upon Explosion Welding of Carbon Steels, The Physics of Metals and Metallography 113, 3 (2012).
• [17] C. Prothe, S. Pauly, C. Toth, Effects of Heat Treatment Time and Temperature on the Properties of Titanium/Steel and Zirconium/Steel Clad, Corrosion Solutions Conference 2005 -Proceedings.