PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Structure and Properties of Modified Flax Yarn with Collagen

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Struktura i wlasciwosci przędz lnianych mofyfikowanych kolagenem
Języki publikacji
EN
Abstrakty
EN
The structure and property changes of collagen modified flax yarn were investigated in order to improve the usability of flax yarn. First flax yarn was treated with sodium hydroxide solution and next with chloroacetic acid to get carboxymethyl flax yarn. Then the carboxymethyl flax yarn was grafted with gelatin protein solution to obtain modified flax yarn. Reactive blue dye was used for the dyeing test of the modified flax yarn. Its structure was characterized and analysed by FT-IR, X-ray diffraction and SEM. Meanwhile breaking strength and elongation at break of the modified flax yarn and the exhaustion rate and fixation rate of reactive blue dye was tested, respectively. The results show that the carboxymethyl flax yarn and gelatin protein are combined with a chemical bond. The different mass concentration of the gelatin solution has some influence on the grafting rate of flax yarn grafted with collagen. After modification of the flax yarn, the breaking strength shows a little loss, the elongation at break increases to a certain degree, and the exhaustion and fixation rate of the reactive dye increase significantly.
PL
Badano strukturę i zmiany właściwości przędz lnianych modyfikowanych kolagenem w celu polepszenia właściwości użytkowych. W pierwszej fazie przędze traktowano roztworem wodorotlenku sodu, a następnie kwasem chlorooctowym w celu otrzymania karboksymetylocelulozy. Otrzymaną przędzę szczepiono roztworem protein. Przędzę barwiono reaktywnym barwnikiem niebieskim. Właściwości strukturalne przędzy zbadano stosując spektroskopię FTIR, dyfrakcję rentgenowską i SEM. Stwierdzono, że zmodyfikowane przędze posiadają nieznacznie mniejszą wytrzymałość na rozciąganie, natomiast większe wydłużenie przy zerwaniu. Stwierdzono również, że zdolności barwienia wzrosły znacznie po modyfikacji.
Rocznik
Strony
30--34
Opis fizyczny
Bibliogr. 26 poz., rys., tab.
Twórcy
autor
  • College of Light Industry and Textile, Qiqihar University, Qiqihar, P. R. China
autor
  • College of Light Industry and Textile, Qiqihar University, Qiqihar, P. R. China
autor
  • College of Light Industry and Textile, Qiqihar University, Qiqihar, P. R. China
autor
  • College of Light Industry and Textile, Qiqihar University, Qiqihar, P. R. China
Bibliografia
  • 1. Cui GX. Textile Auxiliaries 2012; 29: 35- 38.
  • 2. Ahmed NSE, El-Shishtawy RM. Journal of Materials Science 2010; 45: 1143- 1153.
  • 3. Zhao B, Lin H, Chen YY. Advanced Textile Technology 2010; 30: 65- 68.
  • 4. Sójka-Ledakowicz J, Lewartowska J, Gajdzicki B. Fibres & Textiles in Eastern Europe 2000; 8(3): 76-79.
  • 5. Ren X, Buschle-Diller G. Colloids & Surfaces A: Phys. 2007; 299: 15- 21.
  • 6. Cao YJ, Chan F, Chui YH. BioResources 2012; 7: 4109- 4121.
  • 7. Lindqvist J, Malmstrom E. J. Appl. Polym. Sci. 2008; 102: 4155- 4162.
  • 8. Zaman HU, Khan MA, Khan RA. International Journal of Polymeric Materials and Polymeric Biomaterials 2011; 60: 754-765.
  • 9. Liu ZT, Sun CA, Liu ZW. J. Appl. Polym. Sci. 2008; 109: 2888- 2894.
  • 10. Kaith BS, Kalia S. International Journal of Polymer Analysis and Characterization 2007; 12: 401- 412.
  • 11. Zhao B, Zhang F, Lin H. Textile Auxiliaries 2011; 28: 12-14.
  • 12. Sreekala MS, Kumaran MG, Joseph S. Applied Composite Materials 2000; 7: 295-329.
  • 13. Ray D, Sarkar BK, Rana AK. Bulletin of Material Science 2001; 24: 129-135.
  • 14. Zhang ZF. Chemical Industry and Engineering Progress 2010; 29: 1493-1499.
  • 15. Wang D, Song ZQ, Shang SB. Journal of Nanjing Forestry University: Natural Sciences Edition 2007; 31: 27-31.
  • 16. Qin YM. Journal of Textile Research 2006; 27: 97-99.
  • 17. Jiang LY, Li YB, Zhang L. Polymer Materials Science and Engineering 2007; 23: 232-235.
  • 18. Tang RC, Mei J. Journal of Applied Polymer Science 2008; 110: 1195-1200.
  • 19. Ishii K, Oka S. Sen-i Gakkaishi 1983; 39: 479-484.
  • 20. Dong QZ, Gu LX. European Polymer Journal 2002; 38: 511-519.
  • 21. Zhang Y, Lin H, Chen YY. Journal of Tianjin Polytechnic University 2008; 27: 80-82.
  • 22. Zhang Y, Lin H, Chen YY. Silk 2008; 45: 27-29.
  • 23. Chen YG, Liu Y, Mao L. Textile Auxiliaries 2011; 28: 28-30.
  • 24. Liu J. Journal of Textile Dyeing and Finishing 2010; 32: 32-34.
  • 25. Yang MG, Lin H, Chen YY. Silk 2007; 44: 24-25.
  • 26. Yao LR, Lin H, Chen YY. Journal of Suzhou Science and Technology University: Engineering and Technology Edition 2007; 20: 70-74.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-320aaf99-9a13-4289-8af6-d4a8e174fc35
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.