Effect of technological parameters on the surface roughness of aluminium alloys after turning

• Autorzy: Zagórski Ireneusz , Warda Tomasz

Identyfikatory

DOI

10.12913/22998624/87136

• Języki publikacji: EN

Abstrakty

EN

The paper analyses the effect of technological parameters of turning (vc and f) on the 2D surface roughness parameters of aluminium alloys. Turning was carried out with SVJBL 2525 M11 shank tool, with VCGT 110302FN-25P insert, dedicated for machining light alloys. Three aluminium alloy types were examined in the study: 7075, 2024, 6082. The present study is focused on selected 2D surface texture parameters, and concludes that feed exerts considerable impact on the surface quality. Simultaneously, the findings of the study indicate that from the technological perspective the change of cutting speed vc does not impact the quality of the machined surface.

Słowa kluczowe

EN

aluminium alloys; turning; surface roughness

PL

stopy aluminium; obracanie; chropowatość powierzchni

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 2
• Strony: 144--149
• Opis fizyczny: Bibliogr. 20 poz., fig.

Twórcy

autor

Zagórski Ireneusz

• Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

autor

Warda Tomasz

• Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Dursun S.K., Shivakumar R.: Observations of the tool–chip boundary conditions in turning of aluminum alloys. Wear, 262, 2007, 889–904.
• 2. Feldshtein E., Józwik J., Legutko S.: The influence of the conditions of emulsion mist formation on the surface roughness of AISI 1045 steel after finish turning. Advances in Science and Technology Research Journal, 10, 30, 2016, 144–149.
• 3. Grzesik W.: Effect of the machine parts surface topography features on the machine service. Mechanik, 8–9, 2015, 587÷593.
• 4. Gómez-Parra A., Álvarez-Alcón M., Salguero J., Batista M., Marcos M. Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys. Wear, 302, 1–2, 2013, 1209–1218.
• 5. Józwik J.: Modeling of workpieces deflections in turning process. Advances in Science and Technology, 8, 2011, 183-191.
• 6. Kamieńska-Krzowska B., Kłonica M.: The role of surface topography measurement strategy on the evaluation of selected roughness parameters. Mechanik, 8–9, 2014, 138–145.
• 7. Kilic D.S., Raman S.: Observations of the tool– chip boundary conditions in turning of aluminum alloys. Wear, 262, 7–8, 2007, 889–904.
• 8. Kłonica M., Kuczmaszewski J.: Analysis of the process of forming the chip in the process of turning AW7075 aluminum alloy. Mechanik, 10, 2016, 1382-1383.
• 9. Kuczmaszewski J., Pieśko P.: Wear of milling cutters resulting from high silicon aluminium alloy cast AlSi21CuNi machining. Eksploatacja i Niezawodnosc – Maintenance and Reliability. 16, 1, 2014, 37-41.
• 10. Kwaczyński W., Filipowicz K.: Innovations in the use of CNC lathes. Mechanik, 8–9, 2016, 1206–1207.
• 11. Oczoś K.E.: Doskonalenie procesów kształtowania ubytkowego stopów aluminium. Mechanik, 3–4, 2009, 153–163, 249–256.
• 12. Sedlacek M., Podgornik B., Vizitin J.: Influence of surface preparation on roughness parameters, friction and wear. Wear, 266, 2009, 482–487.
• 13. Świć, A., Gola, A., Wołos, D., Opielak M.: Micro-geometry Surface Modelling in the Process of Low-Rigidity Elastic-Deformable Shafts Turning. Iranian Journal of Science And Technology-Transactions of Mechanical Engineering, 2016, 1–9.
• 14. Świderski J., Dobrowolski T.: The principles of good practice for the measurement of surface roughness after a very accurate turning. Mechanik, 8–9, 2016, 1140–1141.
• 15. Torres A., Puertas I., Luis C.J.: Surface Roughness Analysis on the Dry Turning of an Al-Cu Alloy. Procedia Engineering, 132, 2015, 537–544.
• 16. Włodarczyk M. The influence of the coordinate correction procedure of measuring probe dedicated lathe CTX 450 on the dimensional accuracy. Mechanik, 10, 2016, 1348–1349.
• 17. Wojciechowski S., Lisiak P., Twardowski P.: Optimization of cutting parameters for the longitudinal turning of combustion engines’ pistons. Mechanik, 8–9, 2016, 1022–1023.
• 18. Zagórski I., Warda T., Włodarczyk M.: The influence of technological parameters on selected surface roughness parameters during aluminum 7075 alloys turning. Mechanik, 8-9 2016, 1060–1061.
• 19. http://www.sandvik.coromant.com/pl (access: 17.05.2016).
• 20. PN–EN ISO 4287:1999. (ISO 4287:1997. Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters). Struktura geometryczna powierzchni: metoda profilowa.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).