Application of the method of the nonparametric identification of nonlinear dynamic control objects for the crushed vulcanization modification

• Autorzy: Fursa O. , Gyrenko A. , Cheremysinova A. , Sheikus A.
• Języki publikacji: EN

Abstrakty

EN

Solving a problem of building the automatic control system of the industrial rubber article technological process by means of modeling software is one of the essential parts of providing the technological effectiveness. The work concerns the problem of application of the method of the nonparametric identification of a nonlinear dynamic control object for the process of modification of crushed vulcanized rubber. This process is an explicit nonlinear and nonstationary system of control parameters. The application of this method allows to obtain reliable information on an object without difficult computation, and the reliability of the method is corroborated graphically and with the computation. Depending on the degree of complexity of an object this method can be deterministic or probabilistic, can describe only time development, only spatial development or time-spatial development of an object. The influence of the process type on the identification results was analyzed in the work. Therefore, the task of increasing the quickness of information selection about the object is still a topical problem for the non-parametric identification. Conclusions about a possibility of activation of the identification procedure were made. The elaborated algorithm allows to apply it for other technological processes with self-adjusting systems when the condition of quasi-stationarity is fulfilled.

Słowa kluczowe

EN

control object; identification; adaptive control system; crushed vulcanized rubber; modification

• Wydawca: Polish Academy of Sciences, Branch in Lublin
• Czasopismo: ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
• Rocznik: 2015
• Tom: Vol. 4, No 4
• Strony: 17--22
• Opis fizyczny: Bibliogr. 32 poz., rys.

Twórcy

autor

Fursa O.

• Ukrainian State University of Chemical Technology

autor

Gyrenko A.

• Ukrainian State University of Chemical Technology

autor

Cheremysinova A.

• Ukrainian State University of Chemical Technology

autor

Sheikus A.

• Ukrainian State University of Chemical Technology

Bibliografia

• 1. Strogatz, S. H. 2001. Nonlinear dynamics and chaos: with applications to physics, biology and chemistry. Perseus publishing.
• 2. Katok, A., & Hasselblatt, B. 1995. Introduction to the modern theory of dynamical systems. Cambridge, Cambridge.
• 3. Holmes P. 1990. Poincaré, celestial mechanics, dynamical-systems theory and “chaos”. Physics Reports Vol.193, No 3.
• 4. Ovcharov V. 2001. The properties of rubber compounds and rubber: assessment, regulation, stabilization of scientific publications. M.: Santa TM, 400. (in Russian).
• 5. Sokolov Е. 1999. Recycling of used tires: Monograph .Tula, 134. (in Russian).
• 6. Gritsak О. А., Zakharov U. І., Vaschenko U. М. 2008. The influence of operating of crushed vulcanizate on the properties of elastomeric compositions. Problems of chemistry and chemical technology. №6, 46-50. (in Russian).
• 7. Golub L. S., Gritsak О. О., Nikolenko М. V., Homyuk В. І., Vaschenko U. М. 2011. Efficiency of application of crushed vulcanizate in elastomeric compositions considering adsorption of modifying additives on its surface. Problems of chemistry and chemical technology. №1, 93-96. (in Ukraininan).
• 8. Evdokimenko N. М., Burmistr М. V., Vaschenko U. М., Kotov U. L. 2003. Resin mixes and composites. Dnipropetrovsk: USUCT, 92-94. (in Ukraininan).
• 9. Kercha U. U., Onischenko Z. V., kutyanina V. S., Shelkovnikova L. А. 1986. Structural-chemical modification of elastomers. Kiev: Naukova dumka, 232. (in Russian).Anischenko V.S., 1990. Complex oscillations in simple systems. М.: Nauka, (in Russian).
• 10. Kasatkin M. 1998. Problems depreciated recycling of tires and rubber products. - M. .: Nauka. (in Russian).
• 11. 1989.Terminology Guide to rubber- M .: Chemistry, - 400. (in Russian).
• 12. Makarov V., Drozdowski V. 1986., Use of waste tires and rubber products manufacturing. L .: Chemistry, 250. (in Russian).
• 13. Efros A. 1982. Physics and geometry disorder . M.: Nauka, 265. (in Russian).
• 14. Dontsov A., Kanauzova А., Litvinova Т. 1986. Rubber-oligomeric composition in the manufacture of rubber products M .: Chemistry, 216. (in Russian).
• 15. Lifshitz Е. 1954. The theory of molecular forces of attraction between condensed bodies. Academy of Sciences. T.97. № 3.
• 16. Shcherbakov А., Kuprin V., Danilov F. 1990. Features adsorption of aromatic amines in the iron and -Fe2O3. Electrochemistry. T.26. № 1.116-119.
• 17. Fesus E.M. 1991. Eggleton Use of modified rubber mite in mixtures on base an general and special purpose rubbers. Rubber World. V.203, №206. 23-26.
• 18. Anischenko V. S. 1990. Complex oscillations in simple systems. М.: Nauka, (in Russian).
• 19. Rastrygin L. А., Madzharov N. Е. 1977. Introduction into identification of control objects. М.: Energiya, 216. (in Russian).
• 20. Djaconov V. 2006. MathCAD 2001: special manual. Piter, 832. (in Russian).
• 21. Shandrov B.V. 2007. Automation equipment: textbook for students higher educational establishment. Moskow: publishing center «Akademiya», 368. (in Russian).
• 22. Likhtenberg А., Liberman М. 1984. Regular and stochastic dynamics. М.: Mir, (in Russian).
• 23. Shuster G. 1988. Deterministic chaos. М.: Mir (in Russian).
• 24. Novichkiy I.V. 2004. Method of active identification of nonlinear dynamic objects. Dnipropetrovsk: System technologies. Regional collected articles. Issue 4 (33), 110-114. (in Russian).
• 25. Batluk V., Basov M. Klymets I. 2013. Mathematical model for motion of weighted parts in curled flow. ECONTECHMOD An International Quarterly Journal On Economics In Technology, New Technologies And Modelling Processes. Vol. 2, No 3, 17-24.
• 26. Artyukh A., Sidorov M. 2014. Mathematical modeling and numerical analysis of nonstationary plan-parallel flows of viscous incompressible fluid by R-functions and galerkin metod. ECONTECHMOD An International Quarterly Journal On Economics In Technology, New Technologies And Modelling Processes. Vol. 3, No 3, 3-11.
• 27. Rul’yanov А., Berkut А. 2005. Automatic control system of process parameters. Publishing of association of building higher educational establishments, 144. (in Russian).
• 28. Miroshnik I. 2006. Automatic control theory. Nonlinear and optimal systems. Tutorial. Piter, 272. (in Russian).
• 29. Trofimova G. М., Novikov D. D., Kompaniets L. V. 2003. Modification of rubber crumb. High-molecular compounds. Series А., V.46, №6, 912-920. (in Russian).
• 30. Neymark U. I., Landa P. S. 1987. Stochastic and chaotic fluctuations. М.: Nauka, (in Russian).
• 31. Loskutov А. U., Mikhailov А. S. 1990. Introduction into energetics. М.: Nauka, (in Russian).
• 32. Itskovich E. L. 2008. Methods of rational automation of production. Infra-Ingeneriya, 240. (in Russian).