PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Optical properties of porous Si/PECVD SiNx:H reflector on single crystalline Si for solar cells

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The improvement of optical confinement on the back crystalline silicon solar cell is one of the factors leading to its better performance. Porous silicon (PS) layer can be used as a back reflector (BR) in solar cells. In this work, single layers of porous silicon were grown by electrodeposition on a single crystalline silicon substrate. The measurement of the total reflectivity (RT) on Si/PS surface showed a significant improvement in optical confinement compared to that measured on Si/standard Al back surface field (BSF). The internal reflectivity (RB) extracted from total reflectivity measurements achieved 86 % for the optimized single PS layer (92 nm thick layer with 60 % porosity) in the wavelength range between 950 and 1200 nm. This improvement was estimated as more than 17 % compared to that measured on the surface of Si/BSF Al contact. To improve the stability and passivation properties of PS layer BR, silicon nitride layer (SiNx) was deposited by PECVD on a PS layer. The maximum measured total reflectivity for PS/SiNx achieved approximately 56 % corresponding to an improved RB of up to 83 %. The PS formation process in combination with the PECVD SiNx, can be applied in the photovoltaic cell technology and offer a promising technique to produce high-efficiency and low-cost c-Si solar cells.
Wydawca
Rocznik
Strony
94--100
Opis fizyczny
Bibliogr. 32 poz., rys., tab.
Twórcy
autor
  • Laboratoire des Materiaux et Structure des Systcmes Electromecaniques et leur Fiabilite, LMSSEF Universite Larbi Ben Mhidi, Algerie
  • Institut des nanotechnologies de Lyon, INL, CNRS-UMR5270, INSA, Villeurbanne F-69621, France
autor
  • Laboratoire des Materiaux et Structure des Systcmes Electromecaniques et leur Fiabilite, LMSSEF Universite Larbi Ben Mhidi, Algerie
autor
  • Institut des nanotechnologies de Lyon, INL, CNRS-UMR5270, INSA, Villeurbanne F-69621, France
autor
  • Laboratoire des Materiaux et Structure des Systcmes Electromecaniques et leur Fiabilite, LMSSEF Universite Larbi Ben Mhidi, Algerie
autor
  • Institut des nanotechnologies de Lyon, INL, CNRS-UMR5270, INSA, Villeurbanne F-69621, France
Bibliografia
  • [1] Tucci M., Serenelli L., Salza E., Pirozzi L., De Cesare G., Caputo D., Ceccarelli M., Mater. Sci. Eng. B-Adv.,159 (2009), 48.
  • [2] Duerinckx F., Kuzma-Filipek I., Nieuwenhuysen K.V., Beaucarne G., Poortmans J., Prog. Photovoltaic, 16 (2008), 399.
  • [3] Bilyalov R., Solanki C.S., Poortmans J., Richard O., Bender H., Kummer M., von Kanel H., Thin Solid Films, 170 (2002), 403.
  • [4] Ghannam M.Y., El-Naggar S., Rafat N., Abouelsaood A.A., IEEE. T. Electron., 46 (1999), 2072.
  • [5] Choulat P., Agostinelli G., Ma F., Duerinckx F., Beaucarne G., 22rdEuropean Photo-voltaic Solar Energy Conference and Exhibition, Milano, 2007.
  • [6] Kusma-Filipek I., Duerinckx F., Nieuwenhuysen K.V., Beaucarne G., Poortmans J., Mertens R., Msp. Status Solidi A, 204 (2007), 1350.
  • [7] Ivanov I.I., Skryshevsky V.A., Nychyporuk T., Lemiti M., Makarov A.V., Klyui N.I., Tretyak O.V., Renew. Energ., 55 (2013), 79.
  • [8] Gatz S., Hannebauer H., Hesse R., Werner F., Schmidt A., Dullweber T., Schmidt J., Bothe K., Brendel R., Msp. Status Solidi A, 4 (2011), 147.
  • [9] Dupuis J., Fourmond E., Nychyporuk O., Gibaja F., Lemiti M., 23rdEuropean Photovoltaic Solar Energy Conference, Valencia, 2008.
  • [10] Panek P., Drabczyk K., Focsa A., Slaoui A., Mater. Sci. Eng B-Adv., 165 (2009), 64.
  • [11] Slaoui A., Pihan E., Ka I., Mbow N.A., Roques S., Koebel J.M., Sol. Energ. Mat. Sol. C., 90 (2006), 2087.
  • [12] Ivanov I. I., Nychyporuk T., Skryshevsky V.A., Lemiti M., Semicond. Msp. Quantum Electron. Opto-electron., 12 (2009), 406.
  • [13] Kuzma-Filipek I., Duerinckx F., Nieuwenhuysen K.V., Beaucarne G., Poortmans J., Mertens R., Msp. Status Solidi A., 5 (2006), 1340.
  • [14] Duerinckx F., Kuzma-Filipek I., Nieuwenhuysen K.V., Beaucarne G., Poortmans J., IEEE Electr. Device, 27 (2006), 10.
  • [15] Grau M., Nguyen N.T., Straboni A., Lemiti M., Energy Procedia, 10 (2011), 8.
  • [16] Setzu S., Ferrand P., Romestain R., Mater. Sci. Eng B-Adv., 69 (2000), 34.
  • [17] Nychyporuk T., Skrydhevsky V., Lemiti M., 24th European Photovoltaic Solar Energy Conference, Hamburg, 2009.
  • [18] Ramizy A., Hassan Z., Omar K., Al-Douri Y., Mahdi M.A., Appl. Surf. Sci., 257 (2011), 6112.
  • [19] Ramizy A., Aziz W.J., Hassan Z., Omar K., Ibrahim K., Optik, 122 (2011), 2075.
  • [20] Remache L., Fourmond E., Dupuis J., Mahdjoub A., Lemiti M., Mater. Sci. Eng B-Adv.,176 (2011), 45.
  • [21] Dupuis J., Leličvre J.F., Fourmond E., Mongthe Yen V., Nychyporuk O., Le Quang N., Lemit M., 24thEuropean Photovoltaic Solar Energy Conference, Hamburg, 2009.
  • [22] Jellison G.E., Modine F.A., Appl. Msp. Lett., 69 (1996), 371.
  • [23] Zhao J., Martin., Green A., IEEE. T. Electron. Dev., 38 (1991), 1925.
  • [24] Rivory J., Thin solid films, 330 (1998), 333.
  • [25] Mahdjoub A., Zighed L., Thin solid films, 478 (2005), 299.
  • [26] Prabakaran R., Raghavan G., Tripura Sundari S., Esavamoorthy R., Mspica E, 15 (2002), 243.
  • [27] Palik D., Handbook of Optical Constants of Solids, Academic Press Handbook Series, Orlando, 1985.
  • [28] Aroutiounian V.M., Martirosyan K.H., Soukiassian P., J. Appl. Msp., 37 (2002), 25.
  • [29] Gupta A., Jain V.K., Jalwania C.R., Singhal G.K., Arora O.P., Puri P.P., Singh R., Pal M., Kumar V., Semicond. Sci. Tech., 10 (1995), 698.
  • [30] Astrova E.V., Tolmachev V.A., Mater. Sci. Eng BAdv., 70 (2000), 142.
  • [31] Nychyporuk T., Ph.D. Thesis, INSA-Lyon, France, 2006.
  • [32] Remache L., Mahdjoub A., Fourmond E., Dupuis J., Lemiti M., Msp. Status Solidi C, (2010), 1.
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-31d5591e-3963-41c0-8db3-efec17705a84
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.