Quality features of metal matrix composite castings

• Autorzy: Gawdzińska K.

Warianty tytułu

PL

Cechy jakości odlewów z metalowych materiałów kompozytowych

• Języki publikacji: EN

Abstrakty

EN

In this paper it is stated, that a set of quality features of metal matrix composite castings differs from the same set for castings of classic materials, although some features are common for both of these material groups. These features (pertaining to a set of quality characteristics of composite castings) have been named as specific, they have not been determined yet and a description of material quality should be performed (according to the qualitology) on a principle of description of quality characteristics of this product. Therefore, this set of features has been determined. It was proposed to add the following characteristics to the set of specific features of composite castings quality: matrix material, reinforcement material, binding between components and porosity of the composite casting. In this set a sub-set of quality characteristics of composite castings was also determined.

PL

Stwierdzono, że zbiór cech jakości metalowych odlewów kompozytowych różni się od zbioru cech jakości odlewów z materiałów klasycznych, choć niektóre cechy są zbieżne dla obu tych grup materiałowych. Cechy te (należące do zbioru cech jakości odlewów kompozytowych) nazwano specyficznymi, nie były one dotychczas określone, a opis jakości materiałów powinien odbywać się (w myśl kwalitologii) na zasadzie opisu cech jakości tego wyrobu. Określono zatem ten zbiór cech. Zaproponowano, aby do zbioru specyficznych cech jakości odlewów kompozytowych zaliczyć: materiał osnowy, materiał zbrojenia, połączenie pomiędzy komponentami i porowatość odlewu kompozytowego. W zbiorze tym określono również podzbiór cech jakości odlewów kompozytowych.

Słowa kluczowe

EN

quality features; casting; metal matrix composites

PL

cechy jakości; odlewy; metalowe odlewy kompozytowe

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2013
• Tom: Vol. 58, iss. 3
• Strony: 659--662
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Gawdzińska K.

• Maritime University of Szczecin, ul. Wały Chrobrego 1-2, 70-500 Szczecin, Poland

Bibliografia

• [1] J. Sobczak, Metal matrix composites, Institute of Foundry and Institute of Motor Transport, Cracow - Warsaw 2001.
• [2] T. W. Clyne, P. J. Withers, An Introduction of Metal-Matrix Composites, Cambridge University Press, 1993.
• [3] J. Śleziona, Basics of composite technology, Silesian University of Technology Publishing House, Gliwice 1998.
• [4] Z. Konopka, Cast metal composites, Czestochowa University of Technology Publishing House, Czestochowa 2011.
• [5] A. Dudek, Z. Nitkiewicz, Characteristics of microstructure in composite surface layers, Archives of Foundry Engineering 8 (1), 75-78 (2008).
• [6] K. Gawdzińska, Structure Defects Classification of Casts from Saturated Metal Composites, PhD thesis, Technical University of Szczecin, 2003 (in Polish).
• [7] M. Szweycer, Surface phenomena in metal-matrix cast composites technology, Cast Composites, Commission 8.1, CIATF (1998).
• [8] M. Cholewa, Heat flow description during crystallization process of cast dispersive composites, Archives of Foundry Engineering, 1(7) (2007).
• [9] P. Malinowski, J. S. Suchy, Database for foundry engineers - simulation DB - a modern database storing simulation results, Journal of Achievements in Materiale Manufacturing Engineering 43, 349-352 (2012).
• [10] W. K. Krajewski, J. Lelito, J. S. Suchy, P. Schumacher, Computed Tomography-a New Tool in Structural Examinations of Castings, Archives of Metallurgy and Materials 54, 2, (2009).
• [11] PN-EN ISO 9000:2001 Quality Management Systems - Fundamentals and vocabulary.
• [12] PN-EN ISO 9001:2001 Quality Management Systems - Guidelines for performance.
• [13] M. Szweycer, D. Nagolska, Materials technology, Metallurgy and foundries, Poznan University of Technology Publishing House, Poznan 2001.
• [14] J. Szajnar, M. Cholewa, M. Stawarz, T. Wróbel, W. Sebzda, B. Grzesik, M. Stępień, Influence of electromagnetic field on the morphology of graphite in structure of cast iron, Archives of Foundry Engineering, Katowice-Gliwice, 10, 175-180 (2010).
• [15] K. Gawdzińska, Material and technological conditions of quality of metal composite castings, Archives of Foundry Engineering, Katowice-Gliwice 2012.