Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Ocena koncepcji mikrosamolotu ze śmigłem w szczelinie płata
Języki publikacji
Abstrakty
Two configurations of micro-airplanes are compared in this paper. The first, very innovative one, has a propeller working in a slot in the middle of the wing. The second airplane has more classical configuration with a pusher propeller. Advantages and disadvantages of both configurations are evaluated, which makes it possible to assess what are the best possible mission types for each micro-airplane.
W artykule porównano dwie konfiguracje mikrosamolotów. Pierwsza z nich, innowacyjna, ma śmigło w szczelinie płata. Druga, bardziej konwencjonalna zakłada wykorzystanie śmigła pchającego. Oceniono wady i zalety obydwu konfiguracji, dzięki czemu można wskazać najbardziej odpowiednie rodzaje misji dla każdego z mikrosamolotów.
Wydawca
Czasopismo
Rocznik
Tom
Strony
269--282
Opis fizyczny
Bibliogr. 13 poz., fot., rys., tab.
Twórcy
autor
- Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology; 24 Nowowiejska Street, 00-665 Warsaw
autor
- Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology; 24 Nowowiejska Street, 00-665 Warsaw
Bibliografia
- [1] Morris S. J.: Design and Flight Test Results for Micronized Fixed-Wing and VTOL Aircraft, Proceedings of the First International Conference on Emerging Technologies for Micro Air Vehicles, Georgia Institute of Technology, Atlanta, GA, February 1997.
- [2] Bovais C., Mackrell J., Foch R., Carruthers S.: Dragon Eye UAV: Concept to Production, Proceedings of UAVs XVIII International Conference, Bristol, UK, 31 March – 2 April 2003, pp. 3.1-3.12.
- [3] Grasmeyer J. M., Keennon M. T.: Development of the Black Widow Micro Air Vehicle, AIAA Paper 2001-0127, January 2001.
- [4] Watkins S., Melbourne M.: Atmospheric Winds and Their Implications for Microair Vehicles, AIAA Journal, Vol. 44, No 11, November-December 2006, pp. 2591-2600.
- [5] Galiński C., Eyles M., Żbikowski R.: Experimental Aerodynamics of Delta Wing MAVs and their Scaling, Proceedings of the XVIII International UAV Conference, 31 March – 2 April 2003, Bristol, UK.
- [6] Polhamus E. C.: A Concept of the Vortex Lift of Sharp-Edge Delta Wings Based on a Leading-Edge-Suction Analogy, NASA Technical Note TN D-3767, December 1966.
- [7] Lamar J. E.: The use and characteristics of vortical flows near a generating aerodynamic surface: a perspective, Prog. Aerospace Sci. Vol. 34, No.3/4, 1998, pp. 167-217.
- [8] Galiński C., Lawson N., Żbikowski R.: Delta wing with leading edge extension and propeller propulsion for fixed wing MAV, Proceedings of ICAS Congress, ICAS, Yokohama, Japan, 29 August – 3 September 2004, ICAS Paper 2004-1.10.5.
- [9] Galiński C.: Gust resistant Fixed Wing Micro Air Vehicle, Journal of Aircraft, AIAA, Vol. 43, No. 5, September-October 2006, pp. 1586-1588.
- [10] Shyy W., Klevenbring F., Milsson M., Sloan J., Carrol B., Fuentes C.: Rigid and Flexible Low Reynolds Number Airfoils, Journal of Aircraft, Vol. 36, No. 3, May-June 1999, pp. 523-529.
- [11] Galiński C., Mieloszyk J., Piechna J.: Progress in the gust resistant MAV programme, 577 paper (6.10.3) in proceedings of the ICAS’2010 conference, Nice, 19-24 September 2010.
- [12] Mieloszyk J.: Handling Optimization Problems on an Example of Micro UAV, pp. 1428-1438 in proceedings of the CEAS’2011 conference, Venice, 24-28 October 2011.
- [13] Galiński C., Mieloszyk J.: Results of the gust resistant MAV programme, paper 186 in proceedings of the ICAS’2012 conference, Brisbane, 23-28 September 2012.
Uwagi
EN
This work was supported by: Polish Ministry of Science and Higher Education through the grant O N509 025836, National Science Centre (NCN) through the grant UMO-2011/01/N/ST8/07347, Rector of Warsaw University of Technology through the grant 503R11320264004. Special thanks for Jarosław Hajduk, who was a test pilot and to Marcin Szender, who helped to manufacture moulds.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-31d055e3-9dc8-4d0a-9d6c-0ce7d047fc74