State of the Art of Ex-Situ Aluminium Matrix Composite Fabrication through Friction Stir Processing

Gangil, N.; Siddiquee, A. N.; Maheshwari, S.; Al-Ahmari, A. M.; Abidi, M. H.

doi:10.24425/122398

Artykuł - szczegóły

Tytuł artykułu

State of the Art of Ex-Situ Aluminium Matrix Composite Fabrication through Friction Stir Processing

Autorzy

Gangil N. , Siddiquee A. N. , Maheshwari S. , Al-Ahmari A. M. , Abidi M. H.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.24425/122398

Warianty tytułu

Języki publikacji

Abstrakty

Aluminium metal matrix composites (AMMCs) are the fastest developing materials for structural applications. Friction Stir Processing (FSP) has evolved as a promising surface composite fabrication technique mainly because it is an eco-friendly and solid-state process. A spurt in the interest of research community and a resulting huge research output makes it difficult to find relevant information to further the research with objectivity. To facilitate this, the present article addresses the current state of the art and development in surface metal matrix fabrication through FSP with a specific focus on ex-situ routes. The available literature has been carefully read and categorized to present effects of particle size, morphology and elemental composition. The effect of various reinforcements on development of different functional characteristics is also discussed. Effect of main FSP parameters on various responses is presented with objectivity. Based on the studied literature concluding summary is presented in a manner in which the literature becomes useful to the researchers working on this important technology.

Słowa kluczowe

friction stir processing aluminium alloys ex-situ composites

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Czasopismo

Archives of Metallurgy and Materials

Rocznik

2018

Tom

Vol. 63, iss. 2

Strony

719--738

Opis fizyczny

Bibliogr. 116 poz., rys., tab., wzory

Twórcy

autor

Gangil N.

namrata.gangil@gmail.com

Netaji Subhas Institute of Technology, Department of Manufacturing Processes and Automation Engineering, New Delhi 110078, India

autor

Siddiquee A. N.

Jamia Millia Islamia, Department of Mechanical Engineering, New Delhi 110025, India

autor

Maheshwari S.

Netaji Subhas Institute of Technology, Department of Manufacturing Processes and Automation Engineering, New Delhi 110078, India

autor

Al-Ahmari A. M.

King Saud University, Advanced Manufacturing Institute, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (Farcamt Chair), Riyadh, Saudi Arabia

autor

Abidi M. H.

King Saud University, Advanced Manufacturing Institute, Princess Fatima Alnijiris’s Research Chair for Advanced Manufacturing Technology (Farcamt Chair), Riyadh, Saudi Arabia

Bibliografia

[1] L. P. Borrego, J. D. Costa, J. S. Jesus, A. R. Loureiro, J. M. Ferreira, Theoretical and Applied Fracture Mechanics 70, 68 (2014).
[2] M. Sharifitabar, A. Sarani, S. Khorshahian, M. S. Afarani, Materials and Design 32, 4164 (2011).
[3] D. Yadav, R. Bauri, Materials Letters 64, 664 (2010).
[4] P. Shanmughasundaram, R. Subramanian, Journal of Mechanical Science and Technology 27 (8), 2445 (2013).
[5] S. Basavarajappa, G. Chandramohan, K. Mukund, M. Ashwin, M. Prabu, Journal of Materials Engineering and Performance 15 (6), 668 (2006).
[6] W. Wang, Q. Y. Shi, H. K. Li, T. Li, Journal of Materials Processing Technology 209, 2099 (2009).
[7] D. Pantelis, A. Tissandier, P. Manolatos, P. Ponthiaux, Materials Science and Technology 11, 299 (1995).
[8] L. R. Katipelli, N. B. Dahotre, Materials Science and Technology 17, 1061 (2001).
[9] C. Hu, T. N. Baker, Journal of Materials Science 30, 891 (1995).
[10] C. Hu, H. Xin, T. N. Baker, Journal of Materials Science 30, 5985 (1995).
[11] C. Hu, H. Xin, T. N. Baker, Journal of Materials Science 32, 5047 (1997).
[12] T. C. Lei, J. H. Ouyang, Y. T. Pei, Y. Zhou, Materials Science and Technology 11, 520 (1995).
[13] S. H. Choo, S. Lee, S. J. Kwon, Metallurgical and Materials Transactions A 30 A, 1211 (1999).
[14] S. H. Choo, S. Lee, S. J. Kwon, Metallurgical and Materials Transactions A 30 A, 3131 (1999).
[15] M. Gui, S. B. Kang, K. Euh, Metallurgical and Materials Transactions A 36A, 2471 (2005).
[16] Y. Wang, X. Zhang, G. Zeng, F. Li, Materials and Design 21, 447 (2000).
[17] Y. Wang, X. Zhang, G. Zeng, F. Li, Composites: part A 32, 281 (2001).
[18] S. R. Bakshi, V. Singh, K. Balani, D. G. Mccartney, Surface & Coatings Technology 202, 5162 (2008).
[19] R. S. Mishra, Z. Y. Ma, I. Charit, Materials Science and Engineering A 341, 307 (2003).
[20] W. M. Thomas, E. D. Nicholas, J. C. Needham, M. G. Murch, P. Templesmith, C. J. Dawes, Friction stir butt welding: GB Patent, 9125978.8, 1991-12-06.
[21] A. Yazdipour, M. A. Shafiei, K. Dehghani, Materials Science and Engineering A 527, 192 (2009).
[22] A. N. Siddiquee, S. Pandey, International Journal of Advanced Manufacturing Technology (2014).
[23] A. N. Siddiquee, S. Pandey, N. Z. Khan, Materials Today: Proceedings 2, 1388 (2015).
[24] N. Z. Khan, A. N. Siddiquee, Z. A. Khan, S. K. Shihab. Journal of Alloys and Compounds 648, 360 (2015).
[25] A. N. Albakri, B. Mansoor, H. Nassar, M. K. Khraisheh. Journal of Materials Processing Technology 213, 279 (2013).
[26] M. K. B. Givi, P. Asadi, Advances in friction stir welding and processing, United Kingdom, Elsevier (2014).
[27] R. S. Mishra, M. W. Mahoney, Friction stir welding and processing, p. 309-350, ASM International (2007).
[28] Z. Y. Ma, Metallurgical, Materials Transactions A 39 A, 642 (2008).
[29] Z. Y. Ma, R. S. Mishra, M. W. Mahoney, Acta Materialia 50, 4419 (2002).
[30] I. Charit, R. S. Mishra, Materials Science and Engineering A 359, 290 (2003).
[31] P. Cavaliere, P. P. D. Macro, Materials Science and Engineering A 462, 206 (2007).
[32] F. Nascimento, T. Santos, P. Vilaca, R. M. Miranda, L. Quintino, Materials Science and Engineering A 506, 16 (2009).
[33] M. M. E. Rayes, E. A. E. Danaf, M. S. Soliman, Materials and Design 32, 1916 (2011).
[34] S. Pradeep, V. Pancholi, Material Science and Engineering A 561, 78 (2013).
[35] C. G. Rhodes, M. W. Mahoney, W. H. Bingel, M. Calabrese, Scripta Materialia 48, 1451 (2003).
[36] T. L. Giles, K. O. Ishi, A. P. Zhilyaev, S. Swaminathan, M. W. Mahoney, T. R. Mcnelley, Metallurgical and Materials Transactions A 40A, 104 (2009).
[37] W. Y. Gan, Z. Zhou, H. Zhang, T. Peng, Transactions of Nonferrous Metals Society of China 24, 975 (2014).
[38] P. B. Berbon, W. H. Bingel, R. S. Mishra, T. C. Bampton, M. W. Mahoney, Scripta Materialia 44, 61 (2001).
[39] Y. H. Sohn, T. Patterson, C. Hofmeister, C. Kammerrer, W. Mohr, M. V. D. Bergh, M. Shaeffre, J. Seaman, K. Cho, Journal of Minerals Metals and Material Society 64, 234 (2012).
[40] Z. Y. Liu, B. L. Xiao, W. G. Wang, Z. Y. Ma, Carbon 50, 1843 (2012).
[41] Z. Y. Ma, S. R. Sharma, R. S. Mishra, Materials science and Engineering A 433, 269 (2006).
[42] A. G. Rao, B. R. K. Rao, V. P. Deshmukh, A. K. Shah, B. P. Kashyap, Materials Letters, 63, 2628 (2009).
[43] L. Karthikeyan, V. S. Senthilkumar, K. A. Padmanabhan, Materials and Design 31, 761 (2010).
[44] T. S. Mahmoud, Surface & Coatings Technology 228, 209 (2013).
[45] J. D. M. Costa, J. S. Jesus, A. Loureiro, J. A. M. Ferreira, L. P. Borrego, International Journal of Fatigue 61, 244 (2014).
[46] J. D. Silva, J. M. Costa, A. Loureiro, J. M. Ferreira, Materials and Design 51, 315 (2013).
[47] S. U. Nisa, Z. A. Khan, A. N. Siddiquee, S. Pandey, Recent Advances in Mechanical Engineering 978-93-85909-51-1 (2016).
[48] Y. Hangai, K. Takahashi, T. Utsunomiya, S. Kitahara, O. Kuwazuru, N. Yoshikawam, Materials Science and Engineering A 534, 716 (2012).
[49] R. Bauri, D. Yadav, G. Suhas, Materials Science and Engineering A 528, 4732 (2011).
[50] C. J. Hsu, P. W. Kao, N. J. Ho, Scripta Materialia 53, 341 (2005).
[51] G. L. You, N. J. Ho, P. W. Kao, Material Letters 90, 26 (2013).
[52] G. L. You, N. J. Ho, P. W. Kao, Material Letters 100, 219 (2013).
[53] G. L. You, N. J. Ho, P. W. Kao, Materials Characterization 80, 1 (2013).
[54] I. S. Lee, P. W. Kao, N. J. Ho, Intermetallics 16, 1104 (2008).
[55] S. R. Anvari, F. Karimzadeh, M. H. Enayati, Wear 304, 144 (2013).
[56] A. Heydarian, K. N. Dehghani, T. Slamkish, Metallurgical and Materials Transactions B 45B, 821 (2014).
[57] N. Z. Khan, A. N. Siddiquee, Z. A. Khan, A. K. Mukhopadhyay, Journal of Alloys and Compounds (2016), 10.1016/j.jallcom.2016.11.389 (in press).
[58] G. Mathers, The welding of aluminium and its alloys, 1st Edition, Woodhead Publishing Limited, England (2002).
[59] N. R. Mandal, Aluminium welding, Woodhead Publishing Limited and Alpha Science International Limited, England (2002).
[60] M. Dixit, J. W. Newkirt, R. S. Mishra, Scripta Materialia 56, 541 (2007).
[61] S. M. Arab, S. Karimi, S. A. J. Jahromi, S. Javadpour, S. M. Zebarjad, Materials Science & Engineering A 632, 50 (2015).
[62] A. Kurt, I. Uygur, E. Cete, Journal of Materials Procressing Technology 211, 313 (2011).
[63] E. R. I. Mahmoud, K. Ikeuchi, M. Takahashi, Science and Technology of Welding and Joining 13 (7), 607 (2008).
[64] E. R. I. Mahmoud, K. Ikeuchi, T. Shibayanagi, M. Takahashi, Science and Technology of Welding and Joining 14 (5), 413 (2009).
[65] M. S. Khorrami, M. Kazeminezhad, A. H. Kokabi, Materials Science and Engineering A 602, 110 (2014).
[66] M. S. Khorrami, M. Kazeminezhad, A. H. Kokabi, Metallurgical and Materials Transactions A 46 A, 2021 (2015).
[67] M. S. Khorrami, M. Kazeminezhad, A. H. Kokabi, Materials and Design 80, 41 (2015).
[68] A. Thangarasu, N. Murugan, I. Dinaharan, S. J. Vijay, Sadhana 37, 579 (2012).
[69] Q. Liu, L. Ke, F. Liu, C. Huang, L. Xing, Materials and Design 45, 343 (2013).
[70] W. Xu, L. Ke, L. Xing, X. Zhao, Mat.-wiss. u.Werkstofftech 42 (5), 375 (2011).
[71] B. Zahmetkesh, M. H. Enayati, Materials Science and Engineering A 527, 6734 (2010).
[72] V. Sharma, U. Prakash, B. V. M. Kumar, Materials Today: Proceeding 2, 2666 (2015).
[73] J. Gandra, R. Miranda, P. Vilica, A. Velhinho, J. P. Teixeira, Journal of Materials Procressing Technology 211, 1659 (2011).
[74] R. M. Miranda, T. G. Santos, J. Gandra, N. Lopes, R. J. Silva, Journal of Materials Processing Technology 213, 1609 (2013).
[75] T. G. Santos, N. Lopes, M. Machado, P. Vilaca, R. M. Miranda, Journal of Materials Processing Technology 216, 375 (2015).
[76] Y. Morisada, H. Fujii, T. Nagaoka, K. Nogi, M. Fukusumi, Composites: Part A 38, 2097 (2007).
[77] M. Zohoor, M. K. B. Givi, P. Salami, Materials and Design 39, 358 (2012).
[78] S. Shahraki, S. Khorasani, R. A. Behnagh, Y. Fotouhi, H. Bisadi, Metallurgical and Materials Transactions B 44, 1546 (2013).
[79] A. Dolatkhah, P. Golbabaei, M. K. B. Givi, F. Molaiekiya, Materials and Design 37, 458 (2012).
[80] C. H. Jeon, Y. H. Jeong, J. J. Seo, H. N. Tien, S. T. Hong, Y. J. Yum, S. H. Hur, K. J. Lee, International Journal of Precision Engineering and Manufacturing 15 (6), 1235 (2014).
[81] H. Izadi, A. P. Gerlich, Carbon 50, 4744 (2012).
[82] S. Sahraeinejad, H. Izadi, M. Haghshenas, A. P. Gerlich, Materials Science and Engineering A 626, 505 (2015).
[83] M. A. Moghaddas, S. F. K. Bozorg, Materials Science and Engineering A 559, 187 (2013).
[84] A. S. Zarghani, S. F. K. Bozorg, A. Z. Hanzaki, Materials Science and Engineering A 500, 84 (2009).
[85] A. S. Zarghani, S. F. K. Bozorg, A. Z. Hanzaki, Wear 270, 403 (2011).
[86] A. Thangarasu, N. Murugan, I. Dinaharan, S. J. Vijay, Archives of Civil and Mechanical Engineering 15 (2), 324 (2015).
[87] J. Qu, H. Xu, Z. Feng, D. A. Frederick, L. An, H. Heinrich, Wear, 271, 1940 (2011).
[88] M. Salehi, M. Saadatmand, J. A. Mohandesi, Transactions of Nonferrous Metals Society of China 22, 1055 (2012).
[89] D. H. Choi, Y. I. Kim, D. U. Kim, S. B. Jung, Transactions of Nonferrous Metals Society of China 22, s616 (2012).
[90] M. Saadatmand, J. A. Mohandesi, Journal of Materials Engineering and Performance 23 (3), 736 (2014).
[91] M. Salehi, H. Farnoush, J. A. Mohandesi, Materials and Design 63, 419 (2014).
[92] K. J. Hodder, H. Izadi, A. G. Mcdonald, A. P. Gerlich, Materials Science and Engineering A 556, 114 (2012).
[93] J. F. Guo, J. Liu, C. N. Sun, S. Maleksaeedi, G. Bi, M. J. Tan, J. Wei, Materials Science and Engineering A 602, 143 (2014).
[94] Y. Zhao, X. Huang, Q. Li, J. Huang, K. Yan, International Journal of Advanced Manufacturing Technology 78, 1437 (2015).
[95] D. R. Ni, J. J. Wanga, Z. N. Zhou, Z. Y. Ma, Journal of Alloys and Compounds 586, 368 (2014).
[96] D. K. Lim, T. Shibayanagi, A. P. Gerlich, Materials Science and Engineering A 507, 194 (2009).
[97] M. Bahrami, K. Dehghani, M. K. V. Givi, Materials and Design 53, 217 (2014).
[98] R. Hashemi, G. Hussain, Wear 324-325, 45 (2015).
[99] I. Sudhakar, G. M. Reddy, K. S. Rao, Defence Technology 12 (1), 25 (2016).
[100] E. R. I. Mahmoud, M. Takahashi, T. Shibayanaki, K. Ikeuchi, Wear 268, 1111 (2010).
[101] S. Soleymani, A. A. Zadeh, S. A. Alidokht, Wear 278-279, 41 (2012).
[102] A. A. Mostafapour, S. T. Khandani, Materials Science and Engineering A 559, 549 (2013).
[103] S. A. Hosseini, K. Ranibar, R. Dehmolaei, A. R. Amirani, Journal of Alloys and Compounds 622, 725 (2015).
[104] C. M. Rejil, I. Dinaharan, S. J. Vijay, N. Murugan, Materials Science and Engineering A 552, 336 (2012).
[105] A. Devaraju, A. Kumar, B. Kotiveerachari, Transactions of Nonferrous Metals Society of China 23, 1275 (2013).
[106] A. Devaraju, A. Kumar, A. Kumaraswamy, B. Kotiveerachari, Journal of Materials Research and Technology 2 (4), 362 (2013).
[107] A. Devaraju, A. Kumar, A. Kumaraswamy, B. Kotiveerachari, Materials and Design 51, 331 (2013).
[108] A. Devaraju, A. Kumar, B. Kotiveerachari, Materials and Design 45, 576 (2013).
[109] T. Prakash, S. Sivasankaran, P. Sasikumar, Arabian Journal for Science and Engineering 40, 559 (2015).
[110] M. Narimani, B. Lotfi, Z. Sadeghian, Surface and Coatings Technology 285, 1 (2016).
[111] I. Sudhakar, V. Madhu, G. M. Reddy, K. S. Rao, Defence Technology, 11, 10 (2015).
[112] M. Raaft, T. S. Mahmoud, H. M. Zakaria, T. A. Khalifa, Materials Science and Engineering A 528, 5741 (2011).
[113] Y. Mazaheri, F. Karimzadeh, M. H. Enayati, Journal of Materials Processing Technology 211, 1616 (2011).
[114] Y. Mazaheri, F. Karimzadeh, M. H. Enayati, Metallurgical and Materials Transactions A 45A, 2250 (2014).
[115] D. H. Choi, Y. H. Kim, B. W. Ahn, Y. I. Kim, S. B. Jung, Transactions of Nonferrous Metals Society of China 23, 335 (2013).
[116] S. A. Alidokht, A. A. Zadeh, S. Soleymani, S. Assadi, Materials and Design 32, 2727 (2011).

Uwagi

1. The authors wish to thank the University Grants Commission (UGC) for its financial assistance (vide sanction order No. F.3-40/2012(SAP-II)) under its SAP (DRS-I) sanctioned to Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi for the project entitled “Friction Stir Welding, Ultrasonically Assisted Machining”. The authors are also grateful to the Deanship of Scientific Research, King Saud University for support through Vice Deanship of Scientific Research Chairs.

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-31599428-1c17-4ee0-959e-3a58e257755c