Influence of Cladding Parameters with FCAW on Bead Geometry with Plackett-Burman Experiment Used

• Autorzy: Bęczkowski R.

Identyfikatory

DOI

10.24425/122394

• Języki publikacji: EN

Abstrakty

EN

The paper analyzes, from the geometrical aspect, the quality of the new flux cored wire intended for cladding process in function of changes in cladding parameters such as welding speed, coefficient of thermal conductivity, power source setting, the length of projecting portion of the electrode. The results of bead geometry analysis allows to illustrate the nature of the impact of the examined input variables on parameters of generated surface. The most important parameters here are the depth of penetration and the height of clad. The experimental data were processed using the Plackett-Burman experiment, which describes the impact of technological parameters on the main parameters used during production of resisting panels. It shows mathematical relations describing correlations between the input parameters and the value of depth of penetration and hight of bead made by Flux Cored Arc Welding (FCAW).

Słowa kluczowe

EN

cladding; hardface plate; geometry; Plackett-Burman design; FCAW

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2018
• Tom: Vol. 63, iss. 2
• Strony: 681--687
• Opis fizyczny: Bibliogr. 21 poz., rys., tab., wzory

Twórcy

autor

Bęczkowski R.

• Czestochowa University of Technology, Institute of Mechanical Technologies, 21 Armii Krajowej Av., 42-201 Częstochowa, Poland

Bibliografia

• [1] T. Chmielewski, K. Kudła, M. Węglowski, Institute of Welding Bulletin 58 (5), 193-197 (2014) (in Polish).
• [2] R. Bęczkowski, M. Gucwa, Archives of Foundry Engineering 16 (4), 23-28 (2016).
• [3] R. Bęczkowski, M. Gucwa, J. Wróbel, A. Kulawik, AIP CONF PROC 1738, 480095 (2016); DOI: 10.1063/1.4952331.
• [4] J. Górka, M. Adamiak, E. Darda, Welding Technology Review 83 (7), 31-35 (2011) (in Polish).
• [5] M. Gucwa, R. Bęczkowski, Welding Technology Review 83 (10), 77-80 (2011) (in Polish).
• [6] P. F. Mendez, N. Barnes, K. Bell, S. D. Borle, S. S. Gajapathi, S. D. Guest, H. Izadi, A. K. Gol, G. Wood, Journal of Manufacturing Processes 16, 4-25 (2014).
• [7] J. Niagaj, Welding Technology Review (10), 67-72 (2011).
• [8] R. Bęczkowski, METABK 56 (1-2), 59-62 (2017).
• [9] L. Kukiełka, Podstawy badań inżynierskich, 2002 PWN, Warszawa (in Polish).
• [10] M. Korzyński, Metodyka eksperymentu, 2013 WNT, Warszawa (in Polish).
• [11] D. Jańczewski, C. Różycki, L. Synoradzki, Projektowanie procesów technologicznych, 2010 Oficyna Wydawnicza PW, Warszawa (in Polish).
• [12] Z. Polański, Planowanie doświadczeń w technice, 1984 PWN, Warszawa (in Polish).
• [13] S. Buytoz, M. M. Yildirim, Archives of Foundry Engineering 10 (1), 279-286 (2010).
• [14] A. Zikin, I. Hussainova, C. Katsich, E. Badisch, C. Tomastik, Surf. Coat. Tech. 206, 4270-4278 (2012).
• [15] M. Bonek, Arch. Metall. Mater. 61 (2), 719-724 (2016).
• [16] M. B. Ashok Kumar, N. Murugan, I. Dinaharan, Trans. Nonferrous Met. Soc. China 24 (2014), DOI: 10.1016/S1003-6326(14)63410-5.
• [17] J. Szajnar, A. Walasek, C. Baron, Arch Metall Mater 58 (3) 931-936 (2013); DOI: 10.2478/amm-2013-0104.
• [18] N. Bajić, D. Bajić, D. Veljić, M. Rakin, Z. Janjušević, METABK 53 (3), 361-364 (2014).
• [19] I. Pernis, J. Kasala, D. Žabecká, METABK 52 (3), 352-354 (2013).
• [20] V. Shevelya, W. Orłowicz, A. Trytek, V. Kirilkov, Archives of Foundry Engineering 10 (1), 273-278 (2010).
• [21] A. W. Orłowicz , M. Mróz, M. Tupaj, J. Betlej, F. Páoszaj, Archives of Foundry Engineering 9 (2), 113-118 (2009).

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).