PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Control strategy for ventilation system of sewage sludge solar dryer

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Control of low-temperature drying facilities using unprocessed air causes multiple difficulties due to major variability of ventilation air properties, both daily and seasonal. This paper presents an analysis of operating parameters of a sludge solar drying plant based on an approach that uses the concept of ventilation air drying potential. Formulas for the drying rate as a function of temperature and humidity of the ventilation air are given. Analysis results are used to propose recommendations for control strategy for such facilities aimed at improving efficiency and lowering power consumption. The analytical work was based on experimental data collected during operation of a test solar sludge drying facility located at a waste water treatment plant in Skarżysko-Kamienna (Central Poland).
Rocznik
Strony
145--148
Opis fizyczny
Bibliogr. 14 poz., wykr.
Twórcy
autor
  • Division of Power Machines and Devices, Institute of Heat Engineering, Warsaw University of Technology ul. Nowowiejska 25, 00-665 Warszawa, Poland
Bibliografia
  • [1] K. Brodowicz, Teoria wymienników ciepła i masy (The theory of heat and mass exchangers), Pa´nstwowe Wydaw. Naukowe, 1982.
  • [2] P. Bradshaw, T. Cebeci, Physical and computational aspects of convective heat transfer (1984).
  • [3] P. K, D. R, Moisture sorption characteristics of – stell macadamia nuts, Journal of Food Engineering 18 (1992) 63–76.
  • [4] J. Vaxelaire, Moisture sorption characteristics of waste activated sludge, Journal of Chemical Technology and Biotechnology 76 (4) (2001) 377–382.
  • [5] M. Korczak-Niedzielska, M. Gromiec, Suszenie osadów ściekowych (drying of sewage sludge), in: Materiały Konferencji Naukowo- Technicznej nt.„Osady ściekowe w praktyce”. Częstochowa-Ustroń Conference materials Problems of sludge in wastewater treatment plants, 1998.
  • [6] P. Krawczyk, Research of the heat–flow processes in sewage sludge solar dryer, Ph.D. thesis, Ph. D. thesis, Division of Power Machines and Devices, Institute of Heat Engineering, Warsaw University of Technology (2008).
  • [7] P. Krawczyk, Cumulative ventilation air drying potential as an indication of dry mass content in wastewater sludge in a thin-layer solar drying facility, Archives of Thermodynamics 34 (4) (2013) 23–34.
  • [8] F. Kneule, L. Kołodziejczyk, Suszenie (Drying), Arkady, 1970.
  • [9] C. Strumiłło, Podstawy teorii i techniki suszenia (Drying. Theory and practice), Wydawnictwa Naukowo-Techniczne, 1983.
  • [10] P. Krawczyk, K. Badyda, Modelling of heat and flow processes in thin layer solar sludge dryer. impact of using mixing baffles on the basic parameters of the dryer, Polish J. Env. Stud 20 (2011) 185–189.
  • [11] K. Badyda, P. Krawczyk, Research of heat and flow processes in a solar waste–water sludge dryer, Polish Journal of Environmental Studies 17 (3A) (2008) 28–32.
  • [12] W. Szwarc, J. Szczygieł, P. Krawczyk, Technologia słonecznego suszenia osadów ściekowych (the technology of solar drying of sewage sludge), Czysta Energia 11 (2005) 26–28.
  • [13] P. Krawczyk, Badania doświadczalne suszarni słonecznej osadów ściekowych–szybkość suszenia w funkcji parametrów wentylacji (experimental studies of sewage sludge solar drying - drying rate as a function of ventilation parameters), Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika (2015) 37–44.
  • [14] J. Milewski, W. Bujalski, M. Wołowicz, K. Futyma, J. Kucowski, R. Bernat, Experimental investigation of co 2 separation from lignite flue gases by 100 cm 2 single molten carbonate fuel cell, International Journal of Hydrogen Energy 39 (3) (2014) 1558–1563.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-3077b029-14d7-4865-83cd-f1cbf9baa69e
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.