Shaping optimal zinc coating on the surface of high-quality ductile iron casting. Part I – Moulding technologies vs. zinc coating

• Autorzy: Szczęsny A. , Kopyciński D. , Guzik E.

Identyfikatory

DOI

10.1515/amm-2017-0060

• Języki publikacji: EN

Abstrakty

EN

Studies have demonstrated that in the process of hot dip galvanizing the decisive influence on the mechanism of zinc coating formation and properties has the quality of the mechanically untreated (raw) surface layer of the galvanized product. The terms “casting surface layer” denote various parameters of the microstructure, including the type of metal matrix, the number of grains and the size of graphite nodules, possible presence of hard spots (the precipitates of eutectic cementite) and parameters of the surface condition. The completed research has allowed linking the manufacturing technology of ductile iron castings with the process of hot dip galvanizing.

Słowa kluczowe

EN

hot-dip galvanizing; ductile iron; surface roughness; diffusion coefficient

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 1
• Strony: 385--390
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Szczęsny A.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 30-059 Kraków, Al. Mickiewicza 30, Poland

autor

Kopyciński D.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 30-059 Kraków, Al. Mickiewicza 30, Poland

autor

Guzik E.

• AGH University of Science and Technology, Faculty of Foundry Engineering, 30-059 Kraków, Al. Mickiewicza 30, Poland

Bibliografia

• [1] A. R. Marder, Prog. Mater. Sci. 45, 191-271 (2000).
• [2] A. Tatarek, P. Liberski, H. Kania, P. Podolski, Mater. Eng. 6, 788-791 (2008).
• [3] H. Kania, P. Liberski, Inżynieria Materiałowa 3, 375-380 (2008).
• [4] P. Liberski, H. Kania, P. Podolski, A. Tatarek, L. Kwiatkowski, Physico Chemical Mechanics of Materials 7, 301-307 (2008).
• [5] P. Liberski, A. Tatarek, P. Podolski, H. Kania. Ochrona przed korozją 4, 173-178 (2007).
• [6] W. Wołczyński, Z. Pogoda, G. Garzeł, B. Kucharska, A. Sypień, T. Okane, Arch. Metall. Mater. 59, 1223-1233 (2014)
• [7] D. Kopyciński, A. Szczęsny, The Model of Peritectic Phases Crystallization in Zinc Coating, Frontiers in Solidification, TMS 2016 145th Annual Meeting, 101-105 (2016).
• [8] D. Kopyciński, E. Guzik, Sol. St. Phen. 197, 77-82 (2013).
• [9] V. Kuklik, J. Kudlacek, Hot-Dip Galvanizing of Steel Structures 1st Edition, 2016 Butterworth-Heinemann
• [10] W. J. Smith, F.E. Goodwin, Materials Science and Materials Engineering 4, 2556-2576 (2010).
• [11] F. Ozturk, Z. Evis, S. Kilic, Materials Science and Materials Engineering 3, 178-190 (2017).
• [12] D. Kopyciński, A. Szczęsny, Archives of Foundry Engineering 12, 101-104 (2012).
• [13] D. Kopyciński, E. Guzik, A. Szczęsny, D. Siekaniec, Archives of Foundry Engineering 15, 47-50 (2015).

Uwagi

EN

The work was funded by the NCN based on the decision number DEC-2012/05/B/ST8/00100.

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).