Development of treatment protocol with selective laser melted fixed partial dentures

• Autorzy: Dzhendov D. , Katreva I. , Dikova T.

Identyfikatory

DOI

10.5604/01.3001.0012.0664

• Języki publikacji: EN

Abstrakty

EN

Purpose: of the present paper is to offer treatment protocol with fixed partial dentures, produced by selective laser melting, including clinical and laboratory parts. Design/methodology/approach: The treatment protocols with selective laser melted fixed partial dentures was developed on the basis of literature survey and our previous research about accuracy and mechanical properties of dental bridges, manufactured by additive technologies. Findings: The treatment protocol with fixed partial dentures, produced by selective laser melting, consisting of clinical and laboratory parts, was developed. The treatment procedures with FPD made by SLM were classified as semi-digital when working with extraoral scanner and fully-digital - with intraoral scanner. Research limitations/implications: The introduction of the proposed treatment protocol into the clinical and laboratory practice would lead to a systematic approach and working optimization for prosthodontists and dental technicians when using selective laser melting. Practical implications: Due to the elimination of multiple manual manipulations and technological operations, treatment protocols with FPD, produced by SLM, ensure higher accuracy and quality of the constructions and shorter time for their manufacturing compared to the conventional procedure. Originality/value: The developed clinical and laboratory protocols for the treatment and manufacturing of FPD through SLM clearly show the benefits of the new technology in dentistry and dental technician field.

Słowa kluczowe

EN

materials; biomaterials; selective laser melting; fixed partial dentures; treatment protocol

PL

materiały; biomateriały; selektywne topienie laserowe

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2018
• Tom: Vol. 90, nr 2
• Strony: 68--73
• Opis fizyczny: Bibliogr. 13 poz.

Twórcy

autor

Dzhendov D.

• Faculty of Dental Medicine, Medical University of Varna, 55 Marin Drinov Str, 9002 Varna, Bulgaria

autor

Katreva I.

• Faculty of Dental Medicine, Medical University of Varna, 55 Marin Drinov Str, 9002 Varna, Bulgaria

autor

Dikova T.

• Faculty of Dental Medicine, Medical University of Varna, 55 Marin Drinov Str, 9002 Varna, Bulgaria

Bibliografia

• [1] K. Torabi, E. Farjood, Sh. Hamedani, Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature, Journal of Dentistry. Shiraz University of Medical Sciences 16/1 (2015) 1-9.
• [2] R. van Noort, The future of dental devices is digital, Dental Materials 28 (2012) 3-12, doi: https://doi.org/ 10.1016/j.dental.2011.10.014.
• [3] T. Dikova, D. Dzhendov, M. Simov, I. Katreva- Bozukova, S. Angelova, D. Pavlova, M. Abadzhiev, T. Tonchev, Modem Trends in the Development of the Technologies for Production of Dental Constructions, Journal of IMAB 21/4 (2015) 974-981, doi: http://dx.doi.org/10.5272/jimab.2015214.974.
• [4] P. Malara, L.B. Dobrzanski, Designing and manufacturing of implant prosthetic fixed suprastructures in edentulous patients on the basis of digital impressions, Archives of Materials Science and Engineering 76/2 (2015) 163-171.
• [5] D. Thomas, The Development of Design Rules for Selective Laser Melting, PhD thesis, University of Wales Institute, Cardiff, 2009, 318.
• [6] D. Dzhendov, T. Dikova, Application of selective laser melting in manufacturing of fixed dental prostheses, Journal of IMAB 22/4 (2016) 1414-1417, doi: 10.5272/jimab.2016224.1414.
• [7] B. Vandenbroucke, J.-P. Kruth, Selective laser melting of biocpmpatabile metals for rapid manufacturing of medical parts, Rapid Prototyping Journal 13/4 (2007) 196-203.
• [8] WO 2006079188 Al, Procedure for design and production of implant-based frameworks for complex dental prostheses, PCT number PCT/BE2006/000005, Publication date Oct 31, 2007, Inventors: J.-P. Kruth, I. Naert, B. Vandenbroucke.
• [9] T. Dikova, D. Dzhendov, M. Simov, Microstructure and Hardness of Fixed Dental Prostheses Manufactured by Additive Technologies, Journal of Achievements in Materials and Manufacturing Engineering 71/2 (2015) 60-69.
• [10] T. Dikova, T. Vasilev, D. Dzhendov, E. Ivanova, Investigation the fitting accuracy of cast and SLM Co-Cr dental bridges using CAD software, Journal of IMAB 23/3 (2017) 1688-1696, doi: 10.5272/jimab. 2017233.1688.
• [11] D. Dzhendov, D. Pavlova, M. Simov, et al., Geometrical accuracy of fixed dental prostheses manufactured by additive technologies, Proceedings of the 8th Interna¬tional Scientific Conference for young researchers “Technical Science and Industrial Management”, Varna, Bulgaria, 2014, STUME 1 (2014) 13-17 (in Bulgarian).
• [12] T. Peev, A. Filchev, Klinika na protetichnata dentalna medicina, Eko Print, Sofia, 2008, 272 (in Bulgarian).
• [13] Selective Laser Melting Machine SLM®125, SLM Solution Group AG, Lubeck, Duetschland, Available from: https://slm-solutions.com/products/machines/ selective-laser-melting-machine-slmr125, Acces in: 02.06.2016.