Modeling and control of multimachines system using fuzzy logic

• Autorzy: Bessaad Taieb , Taleb Rachid , Benyoucef Djilali , Belboula Abdelkader

Identyfikatory

DOI

10.15199/48.2019.05.34

Warianty tytułu

PL

Modelowanie i sterowanie systemem wielomaszgnowym z wykorzystaniem fuzzy logic

• Języki publikacji: EN

Abstrakty

EN

This work is devoted to modeling and vector control by fuzzy logic of a multimachines system connected in series. A six-phase asynchronous machine connected in series with a three-phase asynchronous machine fed by a single inverter and controlled independently. Thanks to the powerful means of calculation, which made possible the control of such a system and this allows its integration in applications where the constraints of space and weight require a particular attention.

PL

W artykule opisano zastosowanie układu fuzzy logic do sterowania wielomaszynowym systemem sześciofazowej maszyny asynchronicznej I trójfazowej maszyny asynchronicznej polączonych szeregowo.Do sterowania każdej z maszyn użyto niezeleżnego przekształtnika.

Słowa kluczowe

EN

multimachines systems; vector control; hexa-phase inverter; fuzzy control

PL

system wielomaszynowy; sterowanie fuzzy logic; falownik sześciofazowy

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2019
• Tom: R. 95, nr 5
• Strony: 141--146
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Bessaad Taieb

• Electrical Engineering Department, Hassiba Benbouali University, Chlef, Algeria, LGEER Laboratory

autor

Taleb Rachid

• Electrical Engineering Department, Hassiba Benbouali University, Chlef, Algeria, LGEER Laboratory

autor

Benyoucef Djilali

• Electrical Engineering Department, Hassiba Benbouali University, Chlef, Algeria, LGEER Laboratory

autor

Belboula Abdelkader

• USTO-MB University, Oran, Algeria

Bibliografia

• [1] Jone M., Vukosavic S.N., Levi E., Independent vector control of a six-phase seriesconnected two-motor drive, 2nd IEE Int. Conf.Power Electronics, Machines and Drives PEMD, Edinburgh, UK, pp. 879-884 (CD-ROM Paper No.157), 2004.
• [2] Iqbal A., Levi E., Vukosavic S.N., Dynamics of a serie connected two-motor five-phase drive system with a singleinverter supply, IEEE Industry. Application Society Annual Meeting IAS, Hong Kong, Oct.2005
• [3] Cui Y., KavasseriR., A Particle Filter for Dynamic State Estimation in Multi-Machine Systems With Detailed Models, IEEE Transactions on Power Systems, vol. PP, no. 99, pp. 1- 9, 2015
• [4] SachinK S., George, Mahesh M., Vladimir C., Comparison of full and reduced scale solar PV plant models in multi-machine power systems, IEEE PES T&D Conference and Exposition, pp. 1-5, Chicago, USA, 14-17 April 2014.
• [5] Hongshan Z., Xiaoming L., Excitation prediction control of multi- machine power systems using balanced reduced model, IEEE Power and Energy Society General Meeting (PES), pp. 1- 5, Vancouver, BC,21-25 July 2013.
• [6] E C., Ugalde-Loo, Acha E., Licéaga-Castro E., Multi-machine power system state-space modelling for small-signal stability assessments, Applied Mathematical Modelling, vol. 37, no. 24, pp. 10141-10161, 15 December 2013.
• [7] Zubia I., Ostolaza J.X., Susperregui A., Ugartemendia J., Multimachine transient modelling of wind farms: An essential approach tothe study of fault conditions in the distribution network, Applied Energy, vol. 89, no. 1, pp. 421-429, January 2012.
• [8] Levi E., Jones M., Vukosavic S.N., Even-phase multi-motor vector controlled drive with single inverter supply and series connection of stator windings, IEEE Proc. Electric Power Applications, vol. 150, no. 5, pp. 580-590, 2003.
• [9] Therattil J. P., PandaP. C., Modeling and control of a multimachine power system with FACTS controller, International Conference on Power and Energy Systems (ICPS), pp. 1-6, Chennai, 22-24 Dec. 2011.
• [10] Mahapatra S., JhaA. N., Modeling and simulation of TCSC based controller in a multi machine power system, Students Conference on Engineering and Systems (SCES), pp. 1-6, Allahabad, 28-30 May 2014.
• [11] Kim S., Lee Y., Song H., Kim J. S., Model based PID control design for bus voltage regulation in multi-machine power systems, 12th International Conference on Control, Automation and Systems (ICCAS), pp. 1796-1799, JeJu Island, 17-21 Oct. 2012.
• [12] Zhao H., Lan X., Xue N., Wang B., Excitation prediction control of multi-machine power systems using balanced reduced model, IET Generation, Transmission & Distribution, pp. 1075- 1081, June 2014.
• [13] Ni Z., Tang Y., He H.,Wen J., Multi-machine power system control based on dual heuristic dynamic programming, IEEE Symposium on Computational Intelligence Applications in Smart Grid (CIASG), pp. 1-7, Orlando, FL , 9-12 Dec. 2014.
• [14] Jacobina C., Melo B. V. F .M., B. M. Rocha, da SilvaN. E.R.C., Six-phase machine conversion system with three-phase and single-phase series converters, IEEE Energy Conversion Congress and Exposition (ECCE), pp. 3896-3903, Denver, CO, 15-19 Sept. 2013. Olesiak K., Application of the fuzzy controller in the speed control system of an induction motor. Przegląd Elektrotechniczny, 89 (2013), No. 12, 336-339
• [15] Jakubiec B., Fuzzy logic speed controller for brushless DC motor drive. Przeglad Elektrotechniczny, 90 (2014), No. 12,
• [16] A. Djahbar, Contribution à la commande multimachines connectés en série, Ph.D. thesis, USTO-MB University, Oran, Algeria, 2008.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).