Reliability improvement of power distribution line exposed to extreme icing in Poland

• Autorzy: Ciesielka W. , Gołaś A. , Szopa K. , Bąchorek W. , Benesz M. , Kot A. , Moskwa S. , Zydroń P.

Identyfikatory

DOI

10.24425/bpasts.2020.134656

• Języki publikacji: EN

Abstrakty

EN

Currently, overhead lines dominate in the Polish medium and low voltage distribution networks. Maintaining their high reliability constitutes a very important challenge, especially under the severely changing climate conditions. An overhead power line exposed to high ice and rime loads has been considered. Using the finite element method (FEM), mechanical reliability of the distribution infrastructure was examined under various atmospheric conditions. Loads under the stressful conditions of rime, ice and wind were determined for the weakest section of the 30 kV overhead line, which consisted of concrete poles and ACSR conductors. SAIDI and SAIFI reliability indices and costs were determined for several variants of object reconstruction. The results allowed for determination of a solution relying on relocating the cables of all lateral branches and main line ice protection, through a system based on a weather-coordinated increase of the electrical load. To verify the solution proposed, a field experiment was conducted. The experiment confirmed the effectiveness of the solution proposed that appears to be universal. The paper is a result of synergic cooperation of two academic teams, i.e. a mechanical and electrical power engineering one, and the Distribution System Operator (DSO).

Słowa kluczowe

EN

power distribution network; overhead lines; finite element method; reliability; icing; rime; prevention of line icing

• Wydawca: Polska Akademia Nauk, Wydział IV Nauk Technicznych
• Czasopismo: Bulletin of the Polish Academy of Sciences. Technical Sciences
• Rocznik: 2020
• Tom: Vol. 68, nr 5
• Strony: 1113--1125
• Opis fizyczny: Bibliogr. 47 poz., rys., tab.

Twórcy

autor

Ciesielka W.

• Department of Power Systems and Environmental Protection Facilities, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Gołaś A.

• Department of Power Systems and Environmental Protection Facilities, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Szopa K.

• Department of Power Systems and Environmental Protection Facilities, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Bąchorek W.

• Department of Electrical and Power Engineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Benesz M.

• Department of Electrical and Power Engineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Kot A.

• Department of Electrical and Power Engineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Moskwa S.

• Department of Electrical and Power Engineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

autor

Zydroń P.

• Department of Electrical and Power Engineering, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Krakow, Poland

Bibliografia

• [1] W. Bogusz and T. Godlewski, “Philosophy of geotechnical design in civil engineering – possibilities and risks”, Bull. Pol. Ac.: Tech. 67(2), 289‒306 (2019).
• [2] M. Gad-El-Hak, “The art and science of large-scale disasters”, Bull. Pol. Ac.: Tech. 57(1), 3‒34 (2009).
• [3] K. Sroka and D. Złotecka, “The risk of large blackout failures in power systems”, Arch. Electr. Eng. 68(2), 411–426 (2019).
• [4] P. Szmitkowski, A. Gil-Świderska and S. Zakrzewska, “Electrical energy infrastructure in Poland and its sensitivity to failures as part of the energy security system”, Polityka Energetyczna – Energy Policy Journal, 22(1), 59‒80 (2019).
• [5] W. Dołęga, “Operation safety of the national distribution grid”, Polityka Energetyczna – Energy Policy Journal, 21(3), 123‒136 (2018).
• [6] W. Ciesielka, K. Szopa, and A. Gołaś, “The analysis of load of overhead power line due to weather condition and design of smart system of its recognition”, Pol. J. Environ. Stud. 25(5A), 27‒36 (2016).
• [7] M. Farzaneh, Atmosferic Icing of Power Networks, Springer Science+Business Media B.V., 2008.
• [8] L. Makkonen, “Models for the growth of rime, glaze, icicles and wet snow on structures”, Phil. Trans. R. Soc. A., 358, 2913‒2939 (2000).
• [9] L. Makkonen, “A model of hoarfrost formation on a cable”, Cold Reg. Sci. Tech. 85, 256‒260 (2013).
• [10] L. Makkonen, “Atmospheric icing on sea structures”, US Army Cold Regions Research and Engineering Laboratory, monograph 84‒2, 102, p. 27 (1984).
• [11] C. Klinger, M. Mehdianpour, D. Klingbeil, D. Bettge, R. Hacker, and W. Baer, “Failure analysis on collapsed towers of overhead electrical lines in the region Munsterland (Germany) 2005”, Eng. Fail. Anal. 18, 1873‒1883 (2011).
• [12] M. Kerry, G. Kelk, D. Etkin, I. Burton, and D. Kalhok, “Glazed Over: Canada Copes with the Ice Storm of 1998”, Environ. Sci. Policy Sustain. Dev. 41(1), 6‒11 (1999).
• [13] J. Lu J, M. Zeng, X. Zeng, Z. Fang, and J. Yuan, “Analysis of Ice-Covering Characteristics of China Hunan Power Grid”, IEEE Trans. Ind. Appl. 51(3), 1997‒2002 (2015).
• [14] M. Matko, M. Golobič, and B. Kontić, “Reducing risks to electric power infrastructure due to extreme weather events by means of spatial planning: Case studies from Slovenia”, Util. Policy, 44, 12‒24 (2017).
• [15] P. Admirat and Y. Sakamoto, “Calibration of a wet snow model on real cases in Japan and France”, in 4th International Workshop on Atmospheric Icing of Structures (IWAIS), Paris, France, 7‒13 (1988).
• [16] Y. Sakamoto, “Snow accretion on overhead wires”, Philos. Trans. R. Soc. A-Math. Phys. Eng. Sci. 358, 2941‒2970 (2000).
• [17] S. Fikke et al. “COST-727, Atmospheric Icing on Structures: 2006, Measurements and data collection on icing: State of the Art”, Publication of MeteoSwiss 75, 2007.
• [18] M. Orlicz and J. Orliczowa, “Appearance of rime in the Tatras”, Przegląd meteorologiczny i hydrologiczny, 3‒4, 107‒140, (1954) [in Polish].
• [19] S. Baranowski and J. Liebersbach, “The intensity of different kinds of rime on the upper tree line in the Sudety Mountains”, J. Glaciol. 19(81), 489‒497, (1977).
• [20] B. Ruszczak and M. Tomaszewski, “Extreme Value Analysis of Wet Snow Loads on Power Lines”, IEEE Trans. Power Syst. 30(1), 457‒462 (2015).
• [21] K.H. Hesse, “The management of devasting ice storms”, in Proc. 3rd International Workshops of Atmospheric Icing of Structure, Paris, France, 330‒334 (1988).
• [22] J.L. Laforte, M.A. Allaire, and J.L. Laf lamme, “State-of-the-Art on Power Line De-Icing”, Atmos. Res. 46(1‒2), 143‒158 (1998).
• [23] J.C. Polhman and P. Landers, “Present state-of-the-art of transmission line icing”, IEEE Trans. Power Appar. Syst. 101(8), 2443‒2450 (1982).
• [24] C. Volat, M. Farzaneh, and A. Leblond, “De-icing/Anti-icing Techniques for Power Lines: Current Methods and Future Direction”, in Proc. 11th International Workshop on Atmospheric Icing of Structures (IWAIS), Montreal, Canada, 1‒11 (2005).
• [25] R.D. Mulherin and R.B. Haehnel, “Progress in Evaluating Surface Coatings for Icing Control at Corps Hydraulic Structures”, Ice Eng. Tech. Note 03–4 (2003).
• [26] A. Reich, “Interface influences upon ice adhesion to airfoil materials”, in 32nd Aerospace Sciences Meeting and Exhibit, Reno, USA, paper 1994–714 (1994).
• [27] Y. Motlis, ”Melting Ice on Overhead-Line Conductors by Electrical Current”, CIGRE SC22/WG12 document, draft no. 4, revised for the WG12 Meeting, Paris (2002).
• [28] P. Sarbajit and Ch. Junghwan, “Design of novel electromagnetic energy harvester to power a deicing robot and monitoring sensors for transmission lines”, Energy Conv. Manag. 197(10), 1‒11 (2019).
• [29] Q. Yi, H. Zhuang, C. Lu, H. Gao, and W. Wang, “Optimal Control Algorithm of Working Speed of Deicing Robot Based on Fuzzy PID”, in 4th Information Technology, Networking, Electronic and Automation Control Conference (ITNEC), Chongqing, China, 2118‒2122 (2020).
• [30] S. Paul, S. Bashir, and J. Chang, “Design of a novel electromagnetic energy harvester with dual core for deicing device of transmission lines”, IEEE Trans. Magn. 55(2), 1‒4 (2019).
• [31] H. Roger, “Means and Method for Removing Extraneous Matter Like Ice/Snow an Overhead Line”, U.S. Patent no. 2004065458.
• [32] M.A. Allaire and J.L. Laforte, “Method and apparatus for breaking ice accretions on an aerial wire”, U.S Patent no. 6518497 (2003).
• [33] Y. Zhu, Y. Tan, Q. Huang, F. Huang, S. Zhu, and X. Mao, “Research on Melting and De-icing Methods of Lines in Distribution Network,” in 3rd Conference on Energy Internet and Energy System Integration (EI2), Changsha, China, 2370‒2373 (2019).
• [34] J. Luo, G. Zhang, L. He, X. Zhou, W. Xie, and B. Zhang, “Research on Laser Deicing Technology for Overhead Line”, in IEEE 3rd Conference on Energy Internet and Energy System Integration (EI2), Changsha, China, 2424‒2428 (2019).
• [35] W. Ciesielka et al., “Smart Grid in energetic facilities: modelling, monitoring and diagnostics”. Monography of the Department of Power Systems and Environmental Protection. Faculty of Mechanical Engineering and Robotics AGH, Krakow 2017.
• [36] A. Gołaś, W. Ciesielka, and Ł. Chmielowski, “Conception of the dispersed monitoring system of icing and rime accretion of power lines”, Pol. J. Environ. Stud. 21(5A), 78‒84 (2012).
• [37] A. Gołaś et al., “Analysis of the possibilities to improve the reliability of a 15 kV overhead line exposed to catastrophic icing in Poland”, Eksploat. Niezawodn. – Maintenance and Reliability, 21(2), 282‒288 (2019).
• [38] F. Rubel and M. Kottek, “Comments on: ‘The thermal zones of the Earth’ by Wladimir Köppen (1884)”, Meteorol. Z. 20(3), 361‒365 (2011).
• [39] IMGW (Institute of Meteorology and Water Management), “Monthly climate monitoring bulletin”. January 2010. (http://klimat.pogodynka.pl/en/biuletyn-monitoring/#2010/0) (accessed 10 February 2019).
• [40] PKN (Polish Committee for Standardization), 2016. Overhead electrical lines exceeding AC 1 kV – Part 2‒22: National Normative Aspects (NNA) for Poland (based on EN 50341‒1:2012). PN-EN 50341-2-22:2016-04, Warszawa.
• [41] J. Kubiak, A. Łodo, and J. Michałek, “Double branch, pre-tensioned prestressed concrete electrical poles”, Przegląd Budowlany, 82(6), 50‒54 (2011) [in Polish].
• [42] R.N. Allan and R. Billinton, Reliability Evaluation of Power Systems, Plenum Press, New York 1996.
• [43] D. Zhu, R.P. Broadwater, K. Tam, R. Seguin, and H. Asgeirsson, “Impact of DG placement on reliability and efficiency with time-varying loads”, IEEE Trans. Power Syst. 21(1), 419‒427 (2006).
• [44] Y. Damchi and J. Sadeh, “Effect of combined transmission line (overhead line/cable) on power system reliability indices”, in Proc. 4th International Power Engineering and Optimization Conference (PEOCO), Shah Alam, Malaysia 59–63 (2010).
• [45] M. Sadowski, “Ice accretion on electric wires in Poland”. Prace Państwowego Instytutu Hydrologiczno-Meteorologicznego 87, 65‒79 (1965) [in Polish].
• [46] CIGRE, Thermal Behavior of Overhead Conductors, Working Group 22.12, August 2002.
• [47] IEEE, Standard for Calculating the Current-Temperature of Bare Overhead Conductors, IEEE Std 738‒2006.