Researches of ceramic protective layers CAWA-1

• Autorzy: Wiśniewski A.
• Języki publikacji: EN

Abstrakty

EN

In the article results of firing different one-layered ceramic layers (plates, balls) with small-calibre armour-piercing bullets AP with calibre 7.62 mm, 12.7 mm, 14.5 mm were presented. These layers were put on the stiff steel RHA foundation. Influence of ceramics and foundation thickness on protective ability of ceramics was shown.

PL

W artykule przedstawiono wyniki ostrzału różnych jednowarstwowych warstw ceramicznych (płytki, kulki) małokalibrowymi pociskami przeciwpancernymi AP kalibru 7.62 mm, 12.7 mm, 14.5 mm. Warstwy te były umieszczane na sztywnym podłożu stalowym RHA. Pokazano wpływ grubości ceramiki i podłoża na zdolność ochronną ceramiki.

Słowa kluczowe

EN

antitank missile; firing; protective ability of ceramics

PL

pocisk przeciwpancerny; ostrzał; zdolność ochronna ceramiki

• Wydawca: Wojskowy Instytut Techniczny Uzbrojenia
• Czasopismo: Problemy Techniki Uzbrojenia
• Rocznik: 2001
• Tom: R. 30, z. 80
• Strony: 7--16
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr.

Twórcy

autor

Wiśniewski A.

• Military Institute of Armament Technology

Bibliografia

• [1] Wiśniewski A.: One-layer and multilayer ceramic armour. PAN Works of Ceramic Sciences Committee Ceramics, Ceramics 41, PTC Polish Ceramic Bulletin – No 3, 1992, (in Polish).
• [2] Wiśniewski A.: Ceramic armour - one-layer and multilayer CAWA. Work 0980. WITU. 1994 (in Polish), (not published).
• [3] Lis J., Pampuch R., Stobierski L., Wiśniewski A., Powroźnik A.: Self-propagating high-temperature synthesis (SHS) an economic combustion technology for ceramic armour materials. Materials from III International Scientific and Technical Symposium MILITARY ARMS. Gdynia, 20-21.09.1995, (in Polish).
• [4] Wiśniewski A., Lis J., Uciński M., Sikorski P.: Passive armour. Pending in Patent Office 1996, (in Polish).
• [5] Grula A., Wiśniewski A., Koteraz T., Zubik T.: Elaboration of the idea of new type of stratified armour for heavy and light vehicles of domestic production andfor modernization of the existing ones. Part of work in frames of PBZ -012-06 titled Research and development of new constructional materials and the basics of technology of production of principle products of military equipment. WITU. 1998, (in Polish), (not published).
• [6] Wiśniewski A., Lis J., Pampuch R., Stobierski L.: Passive protection layer with ceramic units. Pending in Patent Office 1997, (in Polish).
• [7] Lis J., Pampuch R., Stobierski L., Wiśniewski A.: Titanic and silicon carbide new material for usage in ceramic armours. Research project of KBN, Contract No PB 0418/50/94/06, 1994, (in Polish), (not published).
• [8] Lis J., Pampuch R., Stobierski L., Wiśniewski A., Kata D.: Ceramic armour prepared by the self-propagating high-temperature synthesis. Proc. Od CIMTEC, 9th International Conference on Modern and Technologies, Florence Italy 14-19 June 1998 (in print).
• [9] Stobierski L.: Silicon carbide. Structure, properties and receiving. PAN Department in Cracow, Works of Ceramic Sciences Committee, Polish Ceramic Society, Polish Ceramic Bulletin No 10, Ceramics 48, 1996, (in Polish).
• [10] Orsini H., Cottenot C. E.: Specifictest to evaluate intrinsic ballistic properties of ceramic materials against an AP 12.7 mm projectile. Application to improve ceramic materials. 15th International Symposium on Ballistics, Jerusalem, Israel, 21-24 May, 1995, pp. 183-190.
• [11] Ogorkiewicz R. M.: Advances in armour materials. International Defence Review, 4, 1991.
• [12] Wiśniewski A.: Armours – Construction, Designing and Testing. Scientific and Technical Publishing House, Warsaw, 2001, (in Polish).
• [13] Wiśniewski A., Żurowski W.: Ammunition and Armours. Radom Politechnic, Radom, 2001, (in Polish).