Numerical investigation of the influence of explosive welding process setup on the Ti/Cu interlayer morphology

• Autorzy: Mojżeszko Mateusz , Setty Mohan
• Języki publikacji: EN

Abstrakty

EN

Explosive welding is a complex process involving various phenomena influenced by a series of parameters in a noticeably short span of time which affect the morphology and eventually the quality of the weld. Therefore, this paper aims to investigate the influence of these parameters on material behavior with a series of numerical simulations based on a meshless approach. The developed model is based on the SPH (Smoothed Particle Hydrodynamics) method and is used to investigate Ti/Cu system behavior as a case study. Examples of the resulting temperatures and pressures as a function of process setup are presented within the paper. The results obtained demonstrate how weld morphology is related to the process conditions.

Słowa kluczowe

EN

explosive welding; meshless model; smoothed particle hydrodynamics

• Wydawca: Wydawnictwa AGH
• Czasopismo: Computer Methods in Materials Science
• Rocznik: 2020
• Tom: Vol. 20, No. 3
• Strony: 113--120
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Mojżeszko Mateusz

• AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0001-7208-0482

autor

Setty Mohan

• Institut for Frontier Materials, Deakin University, 75 Pigdons Road, Waurn Ponds VIC 3216, Australia

• https://orcid.org/0000-0003-1871-0249

Bibliografia

• Akbari Mousavi, S.A.A., & Farhadi Sartangi, P. (2009). Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel, Materials and Design, 30(3), 459–468.
• Bataev, I.A., Tanaka, S., Zhou, Q., Lazurenko, D.V., Junior, A.M.J., Bataev, A.A., Hokamoto, K., Mori, A., & Chen, P. (2019). Towards better understanding of explosive welding by combination of numerical simulation and experimental study, Materials and Design, 169, 107649.
• Fronczek, D.M. (2017). Microstructural and kinetic characterization of the phenomena occurring at the clad’s interfaces manufactured by explosive welding (PhD thesis), IMMS PAS, Krakow.
• Jinsong, C., Wenjun, C., Shouan, C., Guiyu, Z., & Tong, Z. (2020). Shock Hugoniot and Mie–Grüneisen EOS of TiAl alloy: A molecular dynamics approach, Computational Materials Science, 174, 109495.
• Lednev, V.N., Sdvizhenskii, P.A., Ya Stavertiy, A., Ya Grishin, M., Tretyakov, R.S., Asyutin, R.D., Pershin, S.M. (2021). Online and in situ laser-induced breakdown spectroscopy for laser welding monitoring, Spectrochimica Acta Part B: Atomic Spectroscopy, 175, 106032.
• Li, Y., Liu, C., Yu, H., Zhao, F., Wu, Z.L., Cuirong L., Haibo Y., Fei Z. & Zhisheng W. (2017). Numerical simulation of Ti/Al bimetal composite fabricated by explosive welding, Metals, 2017, 7(10), 407.
• Li, Z., Beslin, E., den Bakker, A.J., Scamans, G., Danaie, M., Williams, C.A., & Assadi, H. (2021). Bonding and microstructure evolution in electromagnetic pulse welding of hardenable Al alloys, Journal of Materials Processing Technology, 290, 116965.
• Liu, G.R., & Liu, M.B. (2003). Smoothed particle hydrodynamic: a meshfree particle method, World Scientific Publishing.
• Madej, L., Perzynski, K., & Paul, H. (2015). Numerical modelling of explosive welding on the basis of the coupled Eulerian Lagrangian approach, Key Engineering Materials, 651–653, 1415–1420.
• Nassiri, A., & Kinsey, B. (2016). Numerical studies on high-velocity impact welding: smoothed particle hydrodynamics (SPH) and arbitrary Lagrangian–Eulerian (ALE), Journal of Manufacturing Processes, 24(2), 376–381.
• Nassiri, A., Zhang, S., Lee, T., Abke, T., Vivek, A., Kinsey, B., & Daehn, G. (2017). Numerical investigation of CP-Ti & Cu110 impact welding using smoothed particle hydrodynamics and arbitrary Lagrangian–Eulerian methods, Journal of Manufacturing Processes, 28(3), 558–564.
• Paul, H., Lityńska-Dobrzyńska, L., & Prażmowski, M. (2013). Microstructure and phase constitution near the interface of explosively welded aluminum/copper plates, Metallurgical and Materials Transactions A, 44(8), 3836–3851.
• Skuza, W., Paul, H., Berent, K., Prazmowski, M., & Bobrowski, P. (2016). Microstructure and mechanical properties of Ti/Cu clads manufactured by explosive bonding at different stand-off distances, Key Engineering Materials, 716, 464–471.
• Sun, Z., Shi, Ch., Xu, F., Feng, K., Zhou Ch., & Wu X. (2020). Detonation process analysis and interface morphology distribution of double vertical explosive welding by SPH 2D/3D numerical simulation and experiment, Materials and Design, 191, 108630.
• Wachowski, M., Śnieżek, L., Szachogłuchowicz, I., Kosturek, R., & Płociński, T. (2018). Microstructure and fatigue life of Cp-Ti/316L bimetallic joints obtained by means of explosive welding, Bulletin of the Polish Academy of Sciences, 66(6), 925–933.
• Wang, X., Zheng, Y., Liu, H., Shen, Z., Hu, Y., Li, W., Gao, Y., & Guo, C. (2012). Numerical study of the mechanism of explosive/impact welding using Smoothed Particle Hydrodynamics method, Materials & Design, 35, 210–219.
• Wolf, M., Werner, J., & Drummer, D. (2020). Weld seam morphology and bond strength of infrared and vibration welded SLS parts of polyamide 12 as a function of the layer build-up direction and the welding process, Additive Manufacturing, 36, 101451.
• Zhang, Z.L., & Liu, M.B. (2019). Numerical studies on explosive welding with ANFO by using a density adaptive SPH method, Journal of Manufacturing Processes, 41, 208–220.
• Zhang, Z.L., Feng, D.L., & Liu, M.B. (2018). Investigation of explosive welding through whole process modeling using a density adaptive SPH method, Journal of Manufacturing Processes, 35, 169–189.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).