The Analysis of the Accuracy of Wax Casting Models for Medical Applications

• Autorzy: Markowska O. , Budzik G. , Grzelka M. , Dziubek T. , Cader M. , Turek P.
• Języki publikacji: EN

Abstrakty

EN

The article presents an analysis of the dimensional accuracy of wax models, made by Vacuum Casting Method (VC), used in the manufacturing process of bone defects implants of the skull vault. Silicone molds were made on the basis of Rapid Prototypes (RP) models. The RP prototypes were created from 3D-CAD (CATIA V5) developed during studies of the shape of the cranial vault bone defects. The technology used in the RP process was stereolithography (SLA). During the researches also were used an additional tested models. These models were designed on the basis of the dome with cutouts of different shapes. The measurement process was conducted by optical coordinate measuring system. The research was carried out using an Atos Triple Scan scanner. The analysis presents that there is a possibility of using the technology of Vacuum Casting wax models in silicon molds, as the indirect method in the process of implementation of the implant-bone of the skull cap.

Słowa kluczowe

EN

innovative foundry materials; innovative Foundry Technologies; reverse engineering; rapid prototyping; vacuum casting; measuring systems

PL

innowacyjne materiały odlewnicze; innowacyjne technologie odlewnicze; odlewanie próżniowe; systemy pomiarowe

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2014
• Tom: Vol. 14, iss. 1 spec.
• Strony: 77--82
• Opis fizyczny: Bibliogr.16 poz., fot., rys., tab.

Twórcy

autor

Markowska O.

• Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Budzik G.

• Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Grzelka M.

• Institute of Mechanical Technology, Poznan University of Technology, ul. Piotrowo 3, 60-965 Poznań, Poland

autor

Dziubek T.

• Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

autor

Cader M.

• Industrial Research Institute for Automation and Measurements, Al. Jerozolimskie 202, 02-486 Warszawa, Poland

autor

Turek P.

• Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

Bibliografia

• [1] Abdel-Sayed P., von Segesser L. K. (2011). Rapid Prototyping for Training Purposes in Cardiovascular Surgery. Advanced Applications Of Rapid Prototyping Technology In Modern Engineering (pp. 61-74). Edited by Muhammad Enamul Hoque, Published by InTech.
• [2] Anchieta M, V. M., Quaresma M. M., Assis de Salles F. (2011). Rapid Prototyping Applied to Maxillofacial Surgery. Advanced Applications Of Rapid Prototyping Technology In Modern Engineering (pp. 153-172). Edited by Muhammad Enamul Hoque, Published by InTech.
• [3] Bagaria V., Rasalkar D., Bagaria S. J., Ilyas J. (2011). Medical Applications of Rapid Prototyping - A New Horizon. Advanced Applications Of Rapid Prototyping Technology In Modern Engineering (pp. 1-20). Edited by Muhammad Enamul Hoque, Published by InTech.
• [4] Biglino G., Schievano S., Taylor A. M. (2011). The Use of Rapid Prototyping in Clinical Applications. Advanced Applications Of Rapid Prototyping Technology In Modern Engineering (pp. 21-40). Edited by Muhammad Enamul Hoque, Published by InTech.
• [5] Fitzpatric D. P., Isaac G. H. (2000). The Application of CAD In The Design of the Orthopaedic Implants. Computer technology In Biomaterials Science and Engineering (pp. 159-177). Edited by J. Vander Sloten.
• [6] Chrzan R., Gardzińska A., Markowska O., Miechowicz S., Urbanik A. (2009). Use of computer tomography and 3DP Rapid prototyping technique in cranioplasty planning – analysis of accurancy of bone defect modelling (pp.43-46). Polish Journal of Radiology (74).
• [7] Chrzan R., Miechowicz S., Urbanik A., Markowska O., Kudasik T. (2009). Individually Fitted Hearing Aid Device Manufactured Using Rapid Prototyping Based on Ear CT. The Neuroradiology Journal (22). 209-214.
• [8] Kudasik T., Markowski T., Markowska O., Miechowicz S. Methods of fabrication of medical models with complex spatial structures. Archives of Foundry Engineering. Volume 11. Issue Special2/2011. 125-130 ISSN (1897-3310).
• [9] Kudasik T., Markowski T., Markowska O., Miechowicz S. The use of computed tomography and rapid prototyping methods for the otolaryngology. Archives of Foundry Engineering. Volume 8 Special Issue 1/2008, 199-202 ISSN (1897-3310) (in Polish).
• [10] Miechowicz S., Markowska O., Budzik G., Grzelka M. (2009). Methodology And Analysis Of The Reproduction And Fitting Of The Implant Or Filling Destined For Deformed Scull In The Processes Of RE And RP With Coordinate Metrology. International Conference On Bioengineering & Biomaterials IC2B'2009.
• [11] Bill, J., Reuther J., Dittmann W., Kübler N., Meier J., Pistner H., Wittenberg G. (1995). Stereolithography in oral and maxillofacial operation planning. International Journal of Oral and Maxillofacial Surgery (24), 98-103.
• [12] Budzik G. Imaging of blade curvilinear surface of the hot part of aircraft engines in the rapid prototyping process. (2009), Oficyna Wydawnicza Politechniki Rzeszowskiej, Rzeszów 2009. ISBN 978-83-7199-569-9 (in Polish).
• [13] Budzik G. (2009). The analysis of the possibility of the application of the casting waxes in the process RP. Archives of Foundry Engineering. Volume 9. Issue 2/2009, 133-136. ISSN (1897-3310).
• [14] Kozik B., Budzik G., Dziubek T., Grzelka M.,. Tutak M. (2011). Rapid Prototyping of wax foundry models in an incremental process. Archives of Foundry Engineering. Volume 11, issue 2/2011, 113-116. ISSN (1897-3310).
• [15] Grzelka M., Chajda J., Budzik G., Gessner A., Wieczorowski M., Staniek R., Gapiński B.,. Koteras R, Krasicki P., Marciniak L. (2011). Optical coordinate scanners applied for the inspection of large scale housings produced in foundry technology. Archives of Foundry Engineering. Volume 10 Issue Special 1/2010, 255-260. ISSN (1897-3310).
• [16] Budzik G., Matysiak H. Geometric accuracy of wax bade models manufactured in silicon moulds. Archives of Foundry Engineering. Volume 10, issue special 1/2010, 399-404. ISSN (1897-3310).